2164 - Fabricating, Sheet Metal and Other Equipment no longer required by a Retained Client & Others

Behringer HBP360/704G 360mm Rounds Double Column Guided Semi Automatic Double Mitre Cutting Horizontal Bandsaw, Capacities at 90degrees Rectangles 700 x 340mm, at 45 degrees left 400 x 340mm, Right 400 x 340mm, at 30 degrees right 180 x 340mm with Hydraulic Vice, Coolant (1997)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser

Unused Tomet Model 270 Hydro, 230mm Rounds Manual Sindle Mitre Cutting Bandsaw, Rectangles at 90 degrees 260 x 110 mm. Capacities at 45 degrees left 150 mm rounds, 200 x 125 mm rectangles. Capacities at 60 degrees left 90 mm rounds, 85 x 85 mm square with Hydraulic Feed to Bow, Length Stop/ Coolant.

Please Note: This Item is located Staveley, Chesterfield

Unused Tomet Model 270 HYDRO, 230mm Rounds Manual Single Mitre Cutting Bandsaw, Rectangles at 90 degrees 260 x 110 mm. Capacities at 45 degrees left 150 mm rounds, 200 x 125 mm rectangles. Capacities at 60 degrees left 90 mm rounds, 85 x 85 mm square

Please Note: This Item is located Staveley, Chesterfield

Please Note: This item is still in it's original crate, the photographs shown are sample photographs of the same model machine.

Hilmor (Anglia) MD3B, 76.2 mm OD Mild Steel, Mandrel Tube Bender, Wall thickness 3 mm, left and right hand bending. Maximum centre line radius with largest tube 381 mm, maximum bend angle 185 degrees. Manual grip operation, manual toggle on pressure slide, hydraulic mandrel retraction. Length over mandrel 1830 mm. One former only. S/No 7835.94 (1994)

Please Note: This Item is located in Sheffield

Hilmor (Anglia) DB32, 32 mm OD Mild Steel Mandrel Tube Bender, Wall thickness 2 mm, right hand bending. Max C.L.R with largest tube 241 mm, max bend angle 190 deg. Eccentric pin grip operation, manual toggle on pressure slide, hydraulic mandrel retraction. Length over mandrel 1200 mm. One former only. S/No 0268.3.99 (1999)

Please Note: This Item is located in Sheffield

Unused Sahinler Model IBKS2.5, 2.5mm Power Operated Swaging Machine, Throat depth 160 mm, roll diameter 96 mm, shaft length 250 mm. Manual adjustment to top roll, mounted on stand, forward/back adjustable sheet support, foot pedal operation, single speed 16 rpm, 4 sets of rolls, 1.5 kw motor

Please Note: This Item is located Staveley, Chesterfield

Unused Sahinler IDK2, 2 mm, Power Operated Circle Cutting Machine with Pneumatic Sheet Clamping/Centring, Maximum Cutting Diameter 1000 mm, Minimum Cutting Diameter 180 mm. Outer Support Adjustable for Smaller Diameters, Separate Foot Pedal Control with Emergency Stop Button fitted with Brake Motor.

Please Note: This Item is located in Manchester

Boschert LB12/6 220 x 220 x 6mm Mild Steel Fixed Angle Corner Notching Machine with Hold Downs, Bed Rules and Guides, Foot Pedal Control. S/No. 3086

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser

Ward 7DS Combination Turret Lathe with Collet Chuck, Maximum Diameter: 406mm, Cutting Length: 762mm, Spindle Bore: 73mm, 6-Station Turret, Spindle Speeds to 1000rpm, Large Selection of Collets and Turret Tooling. S/No. 4898 (1976)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser

Heavy Duty 14” x 2” Face Double Ended Grinding Machine

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser