2042 - No Longer Required - Toolroom of a Major Aerospace Manufacturer - Machine Tools Auction

Engineering

Auction ended on

2011-10-18 15:00:00.0

Time left

Auction finished

Auction description

Bidding Ends: Tuesday 18th October 2011 at 3.00pm (UK Time)

Final Payment Date: Thursday 20th October 2011 at 17:00:00

Final Clearance Date: Thursday 1st November 2011 at 17:00:00

Location

These Items are located in Bristol

Buyer's premium

Buyer's Premium will be charged at 15.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2011-10-20 17:00:00.0

Final clearance date

2011-11-01 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 60

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
18 Oct 2011 15:10:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 1: Cincinnati Arrow 2000 Vertical Machining Centre

Cincinnati Arrow 2000 Vertical Machining Centre with Heidenhain TNC426 Control, 21 Station ATC, Twin Swarf Conveyors, Renishaw Probe, Table Size: 2.3m x 750mm, X = 2000mm, Y = 762mm, Z = 770mm, Through Spindle Coolant. S/No. 7057-H00-RA-0016 (1998)

Please Note: This Item is located in Bristol

Please Note: The Loading Charge for this Item is: £1675

Due to the sensitive nature of this being an Aerospace company, only specified contractors are allowed on site. therefore, you will receive a seperate invoice from the contractor.

The goods will be disconnected, drained of any coolant, dismantled where necessary and loaded to suitable transport - including open top containers (this charge does not include blocking, securing & ...

Preview image
Ends:
18 Oct 2011 15:40:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 1A: Aluminium Sub-Table – 2300mm x 750mm x 70mm (approx.)

Aluminium Sub-Table – 2300mm x 750mm x 70mm (approx.)

              Please Note: This Item is located in Birmingham

Preview image
Ends:
18 Oct 2011 15:50:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 2: XYZ BRM60-100 CNC Gantry Bridge Mill

XYZ BRM60-100 CNC Gantry Bridge Mill with Siemens Sinumeric 810D Control, 24 Station ATC, Table Size: 2.5m x 1.5m, X = 100”, Y  60”, Z = 28”, Spindle Speed: 8,000rpm. S/No. 8409 (2006)

Please Note: This Item is located in Bristol

Please Note: The Loading Charge for this Item is: £1475

Due to the sensitive nature of this being an Aerospace company, only specified contractors are allowed on site. therefore, you will receive a seperate invoice from the contractor.

The goods will be disconnected, drained of any coolant, dismantled where necessary and loaded to suitable transport - including open top containers (this charge does not include blocking, securing & bracing)

Should you wish to supply closed top containers then please ...

Preview image
Ends:
18 Oct 2011 15:40:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 2A: Aluminium Sub-Table – 1950mm x 900mm x 80mm (approx.)

Aluminium Sub-Table – 1950mm x 900mm x 80mm (approx.)

              Please Note: This Item is located in Birmingham

Preview image
Ends:
18 Oct 2011 15:30:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 3: Beaver VC15 CNC Milling Machine

Beaver VC15 CNC Milling Machine with Fanuc GE11M Control, Table Size: 1.3m x 500mm, X = 1250mm, Y = 510mm, Z = 510mm with Tooling Trolley. S/No. 15791

Please Note: This Item is located in Bristol

Please Note: The Loading Charge for this Item is: £950

Due to the sensitive nature of this being an Aerospace company, only specified contractors are allowed on site. therefore, you will receive a seperate invoice from the contractor.

The goods will be disconnected, drained of any coolant, dismantled where necessary and loaded to suitable transport - including open top containers (this charge does not include blocking, securing & bracing)

Should you wish to supply closed top containers then please contact the contractor for a loading ...

Preview image
Ends:
18 Oct 2011 16:00:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 4: Beaver CNC Toolmaker Milling Machine

Beaver CNC Toolmaker Milling Machine with Heidenhain TNC155 Control, Table Size: 800mm x 400mm with Tooling Trolley. S/No. 15354/TM

Please Note: This Item is located in Bristol

Please Note: The Loading Charge for this Item is: £950

Due to the sensitive nature of this being an Aerospace company, only specified contractors are allowed on site. therefore, you will receive a seperate invoice from the contractor.

The goods will be disconnected, drained of any coolant, dismantled where necessary and loaded to suitable transport - including open top containers (this charge does not include blocking, securing & bracing)

Should you wish to supply closed top containers then please contact the contractor for a loading quotation.

 

  ...

Preview image
Ends:
18 Oct 2011 15:50:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 5: Kearns D3WB Horizontal Borer

Kearns D3WB Horizontal Borer with Phillips 2500 Series D.R.O, Table Size: 13ft x 4ft, Facing Head: 27”, (2) 3ft x 5ft Angle Plates, Tooling. S/No. 5510

Please Note: This Item is located in Bristol

Please Note: The Loading Charge for this Item is: £3275

Due to the sensitive nature of this being an Aerospace company, only specified contractors are allowed on site. therefore, you will receive a seperate invoice from the contractor.

The goods will be disconnected, drained of any coolant, dismantled where necessary and loaded to suitable transport - including open top containers (this charge does not include blocking, securing & bracing)

Should you wish to supply closed top containers then please contact the contractor for a ...

Preview image
Ends:
18 Oct 2011 16:10:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 6: SIP HY-8P Jig Borer

SIP HY-8P Jig Borer with Phillips 2500 Series D.R.O, Table Size: 1500mm x 1000m, and Tooling. S/No. 68 with Tilting PI-5 450mm Rotary Table. S/No. 1487 & Rotoptic PD-6H Horizontal 800mm Rotary Table. S/No. 299 (Circa 1970).

Please Note: This Item is located in Bristol

Please Note: The Loading Charge for this Item is: £1675

Due to the sensitive nature of this being an Aerospace company, only specified contractors are allowed on site. therefore, you will receive a seperate invoice from the contractor.

The goods will be disconnected, drained of any coolant, dismantled where necessary and loaded to suitable transport - including open top containers (this charge does not include blocking, securing & bracing)

Should you wish ...

Preview image
Ends:
18 Oct 2011 16:30:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 7: SIP HYDR-6 Jig Borer

SIP HYDR-6 Jig Borer with Phillips 2500 Series D.R.O, Table Size: 1100mm x 850mm & Tooling. S/No. 282 with Tilting PI-5 450mm Rotary Table. S/No. 1575 & Horizontal PD-6 800mm Rotary Table. S/No. 724

Please Note: This Item is located in Bristol

Please Note: The Loading Charge for this Item is: £785

Due to the sensitive nature of this being an Aerospace company, only specified contractors are allowed on site. therefore, you will receive a seperate invoice from the contractor.

The goods will be disconnected, drained of any coolant, dismantled where necessary and loaded to suitable transport - including open top containers (this charge does not include blocking, securing & bracing)

Should you wish to supply closed top containers ...

Preview image
Ends:
18 Oct 2011 16:20:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 8: SIP MP-5E Jig Borer

SIP MP-5E Jig Borer with Phillips 2500 Series D.R.O, Table Size: 900mm x 750mm & Tooling. S/No. 20006 with Tilting PI-5 450mm Rotary Table. S/No. 5709 & Horizontal PD-5 600mm Rotary Table. S/No. 2212

Please Note: This Item is located in Bristol

Please Note: The Loading Charge for this Item is: £785

Due to the sensitive nature of this being an Aerospace company, only specified contractors are allowed on site. therefore, you will receive a seperate invoice from the contractor.

The goods will be disconnected, drained of any coolant, dismantled where necessary and loaded to suitable transport - including open top containers (this charge does not include blocking, securing & bracing)

Should you wish to supply closed top containers ...

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories