3141 - Large Collective Sale of CNC & Conventional Toolroom Machinery, Wickman Multi-Spindle Lathes and Ancillary Equipment
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: This lot is located in Birmingham and Wolverhampton, West Midlands, UK. Please see individual lots for loading information. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 67
Los 1: Harrison Alpha 550 Plus Gap Bed NC Centre Lathe
Harrison Alpha 550 Plus Gap Bed NC Centre Lathe with Harrison GE Fanuc Control, Distance between centres, 1200mm swing over bed, 640mm diameter Spindle, Speeds 15-1800 rpm, Spindle Bore 100mm, 4-position Toolpost. S/No. 50120 (1999)
Please Note: These lots are located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice ...
Los 2: Europa Milltech 5000 VS CNC Turret Head Milling Machine
Europa Milltech 5000 VS CNC Turret Head Milling Machine with Heidenhain 620 CNC Control, Table size 1200mm x 250mm, Spindle Speeds 55-410 low/470-3550rpm high, Align Power Drawbar, 40 Spindle Taper, Table Guards, Light and Coolant. S/No. 52DT2MX3TE5253 (2013). Country of Origin: China
Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge ...
Los 3: Europa Milltech 5000 VS CNC Turret Head Milling Machine
Europa Milltech (RK Int Machine Tools) 5000 VS CNC Turret Head Milling Machine with Heidenhain 620 CNC Control, Table size 1200 mm x 250 mm, Spindle speeds 55-410 low / 470-3550 rpm high, Align power drawbar, 40 Spindle Taper, Table guards, Light and Coolant (2013)
Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically ...
Los 4: Ona AE 400 Wire Eroder
Ona AE 400 Wire Eroder with Ona CNC Control, Travels X = 600mm, Y = 400mm, Z = 400mm, Max Workpiece X = 1000mm, Y = 800mm, Z = 400mm, Submerged Cutting, Ona Filter System. S/No. 11043 (2005)
Please Note: These lots are located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £400 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which ...
Los 5: Mecrode Minim Spark Eroder
Mecrode Minim Spark Eroder with Goodwin 3 Axis Dro, System 3R Hydraulic Chuck, Table Size 530 x 250mm, Tank Size 700 x 400 x 350mm. S/No. M325 (1990)
Please Note: These lots are located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £100 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. ...
Los 6: Chen Ho CH-V1600S NC Turret Head Milling Machine
Chen Ho CH-V1600S NC Turret Head Milling Machine with Anilam Series 1100 Control, Table Size 1270mm x 255mm, Power Feeds to 3 Axis (Quill not knee), Acro-grip Power Draw Bar (R8 Taper), Vari Speed Spindle Head. S/No. 96037 (1996)
Please Note: Theis lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to ...
Los 7: EmcoTurn 320 Lathe
EmcoTurn 320 Lathe with Siemens Sinumerik Control, 8 Station ATC. S/No. A7TV03 (1995). Country of Origin: Austria
Please Note: These lots are located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now ...
Los 8: Warco WM40 Turret Mill
Warco WM40 Turret Mill, Table Size 1270mm x 255mm, Spindle Speeds 50-400 Low, 400 - 3500 RPM High, Sino 2DS2MS Read Out, A&T Powered Draw Bar, R8 Spindle Taper, Powered Travers to X Axis. S/No. 1504061 (2015)
Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and ...
Los 9: Warco WM40 Turret Mill
Warco WM40 Turret Mill, Table Size 1270mm x 255mm, Spindle Speeds 50 - 400 Low, 400 - 3500 RPM High, Sino SD52MS Read Out, A&T Powered Draw Bar, R8 Spindle Taper, Powered Travers to X Axis. S/No. 1602067 (2016)
Please Note: These lots are located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods ...
Los 10: Warco WM20 Vario Turret Mill
Warco WM20 Vario Turret Mill, Table Size 910mm x 200mm, Sino SDS2MS Read Out, Spindle Speed 1000-3000RPM, 240 Volt, R8 Spindle Taper, Powered Travers to X Axis. S/No. 1507305 (2015)
Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require ...