3116 - Sheet Metal Machinery & Fabrication Equipment, Welders & Bed Plates Surplus to the on-going requirements of The Pryme Group
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 36
Los 10: S F M Twin Roll 48” Long Powered Bending Rolls
S F M Twin Roll 48” Long Powered Bending Rolls
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Los 11: M G 3 Roll Pyramid Bending Rolls
M G 3 Roll Pyramid Bending Rolls Model MH 314C with Pre-Bend Arrangement, Driven Rolls Top Roll 200mm x 1250mm Lower Rolls 180mm. Country of Origin: Italy
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Los 12: Edwards Truecut DD Guillotine Shear Model 13 – 3000
Edwards Truecut DD Guillotine Shear Model 13 – 3000 with Power Backgauge and Digital Display, Variable Rake, Blade Gap and Stroke Adjustment, 3 Front Support Arms Left Side Square Arm, Footswitch Control. (Customer Notice Capacity on M/C 10mm M.S 15mm Aluminium) Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...
Los 13: Excel Radial Drill Model RD 1100
Excel Radial Drill Model RD 1100 with Box Table and Vice, Spindle Centre to Column 1100mm, Drill Head Travel 800mm, Spindle 4 MT, Speeds 44 – 1500rpm Power Rise and Fall, Spindle Brake, Coolant. S/No. 5209 (2006). Country of Origin: Singapore
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This ...
Los 14: Kingsland Universal Metalworker Model 85XS
Kingsland Universal Metalworker Model 85XS – Punch Capacity 85 Ton, Universal Machine with Punch Station – Angle – Section Cutting – Shearing – Notching Punch 55 Dia Thru 12mm 33 Dia Thru 20mm – Shear Flat Bar 380mm x 20mm – Shear Angle 90° 150mm x 15mm 45° 80mm x 10mm Shear Rounds 50mm. S/No. 980898. Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice ...
Los 15: Multimatrix Phoenix EWM Mig/Mag Pulse Welder
Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000533391. Country of Origin: Germany
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Los 16: Multimatrix Phoenix EWM Mig/Mag Pulse Welder
Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000331551. Country of Origin: Germany
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Los 17: Multimatrix Phoenix EWM Mig/Mag Pulse Welder
Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000704087. Country of Origin: Germany
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Los 18: Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch
Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch. S/No. 31630. Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Los 19: Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch
Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch. S/No. 34110. Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.