2937 - CNC Lathes and Machining Centres, Deep Hole Boring, Honing, Gun Drilling Machines no longer required by a Deep Hole Drilling Company

Engineering

Auktion endet am

Dienstag 17 Nov 2020 at 03:00PM (GMT)
Zum Kalender hinzufügen

Verbleibende Zeit

Gebotsfristverlängerung

Artikelbeschreibung

Please Note: These lots are located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Lots 205, 205A, 205 & 205A Combination and 301 are located in Oldham, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Buyer's premium

Es gilt ein Aufgeld von 18 %.

Mehrwertsteuer

Zzgl. Mehrwertsteuer in Höhe von 20 %.

Seitenaufrufe

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Bitte markieren Sie das nachfolgende Kästchen und klicken Sie auf ”Bestätigen“.


* Bitte beachten Sie: Die Genauigkeit der per Google Translate erstellten Übersetzungen kann nicht garantiert werden. Diese Übersetzungen dienen nur zu Informationszwecken. Die englische Beschreibung der Lose hat Vorrang und wurde nach bestem Wissen des Versteigerers erstellt. Für deren Richtigkeit kann jedoch keine Garantie übernommen. Es obliegt dem Käufer, die Richtigkeit der Beschreibung vor Gebotsabgabe zu überprüften.

Hinweis für die Käufer

Datum der letzten Zahlung

19 Nov 2020 at 17:00 (GMT)

Endgültiges Freigabedatum

3 Dez 2020 at 17:00 (GMT)

Versandunternehmen

Lagerfirma

Lose 1-10 von 122

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Endet:
17 Nov 2020 16:30:00 GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£500
Gebote:
8
Aufgeld:
18%
MwSt-Satz:
20%

Los 1: Doosan Puma 3100 XLY Turning Centre

Doosan Puma 3100 XLY Turning Centre (03/2014) with Fanuc 31i Control, SMW Autoblok SLU-X-4-MS 30-245mm Hydraulic Steady, Swing Over Bed 850mm, Swing Over Saddle 670mm, Max Turning Diameter 420mm, Max Work Length 2125mm, 12 Station Turret, Y Travel 130mm, Tooleye, Swarf Conveyor, 310mm 3 Jaw Chuck. S/No. ML0121-000140 

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the ...

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of lots 1, 1A, 1B, 1C, 1D

Preview image
Endet:
17 Nov 2020 16:30:00 GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£25
Gebote:
1
Aufgeld:
18%
MwSt-Satz:
20%

Los 1A: (2) Live Tooling suitable for Puma 3100XLY

(2) Live Tooling suitable for Puma 3100XLY

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of lots 1, 1A, 1B, 1C, 1D

Preview image
Endet:
17 Nov 2020 16:30:00 GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£25
Gebote:
2
Aufgeld:
18%
MwSt-Satz:
20%

Los 1B: (2) Live Tooling suitable for Puma 3100XLY

(2) Live Tooling suitable for Puma 3100XLY

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of lots 1, 1A, 1B, 1C, 1D

Preview image
Endet:
17 Nov 2020 16:30:00 GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£25
Gebote:
1
Aufgeld:
18%
MwSt-Satz:
20%

Los 1C: (1) Live Tool and (2) Tool Holders

(1) Live Tool and (2) Tool Holders

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of lots 1, 1A, 1B, 1C, 1D

Preview image
Endet:
17 Nov 2020 16:30:00 GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£25
Gebote:
2
Aufgeld:
18%
MwSt-Satz:
20%

Los 1D: (1) Live Tool and (2) Tool Holders

(1) Live Tool and (2) Tool Holders

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of lots 1, 1A, 1B, 1C, 1D

Preview image
Endet:
17 Nov 2020 16:30:00 GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£500
Gebote:
43
Aufgeld:
18%
MwSt-Satz:
20%

Los *: Combination of lots 1, 1A, 1B, 1C, 1D

Combination of lots 1, 1A, 1B, 1C, 1D

Lot 1 - Doosan Puma 3100 XLY Turning Centre (03/2014) with Fanuc 31i Control, SMW Autoblok SLU-X-4-MS 30-245mm Hydraulic Steady, Swing Over Bed 850mm, Swing Over Saddle 670mm, Max Turning Diameter 420mm, Max Work Length 2125mm, 12 Station Turret, Y Travel 130mm, Tooleye, Swarf Conveyor, 310mm 3 Jaw Chuck. S/No. ML0121-000140

Lot 1A - (2) Live Tooling suitable for Puma 3100XLY

Lot 1B - (2) Live Tooling suitable for Puma 3100XLY

Lot 1C - (1) Live Tool and (2) Tool Holders

Lot 1D - (1) Live Tool and (2) Tool Holders

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from ...

Preview image
Endet:
17 Nov 2020 15:40:00 GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£500
Gebote:
58
Aufgeld:
18%
MwSt-Satz:
20%

Los 2: Doosan Puma 400LB CNC Turning Centre

Doosan Puma 400LB CNC Turning Centre (09/2012) with Fanuc 32i-A Control, SMW Autoblok SLU-X-4-MS 30-245mm Hydraulic Steady, Max Swing Over Bed 700mm, Swing Over Saddle 590mm, Max Turning Diameter 550mm, Max Work Length 2100mm, Tailstock, 10 Station Turret, Tooleye, Swarf Conveyor, 380mm 3 Jaw Chuck. S/No. ML0133-004592 

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Endet:
17 Nov 2020 17:10:00 GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£500
Gebote:
8
Aufgeld:
18%
MwSt-Satz:
20%

Los 3: Doosan Puma 3100 XLY Turning Centre

Doosan Puma 3100 XLY Turning Centre (05/2015) with Fanuc 31i Control, SMW Autoblok SLU-X-4-MS 30-245mm Hydraulic Steady, Swing Over Bed 850mm, Swing Over Saddle 670mm, Max Turning Diameter 420mm, Max Work Length 2125mm, 12 Station Turret, Y Travel 130mm, Tooleye, Swarf Conveyor, 310mm 3 Jaw Chuck. S/No. ML0121-000172 

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost ...

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of lots 3, 3A, & 3B

Preview image
Endet:
17 Nov 2020 17:10:00 GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£25
Gebote:
4
Aufgeld:
18%
MwSt-Satz:
20%

Los 3A: (2) Live Tools suitable for Puma 3100 XLY

(2) Live Tools suitable for Puma 3100 XLY

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of lots 3, 3A, & 3B

Preview image
Endet:
17 Nov 2020 17:10:00 GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£25
Gebote:
1
Aufgeld:
18%
MwSt-Satz:
20%

Los 3B: (3) Tool Holders and (1) Live Tooling

(3) Tool Holders and (1) Live Tooling

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of lots 3, 3A, & 3B

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Kategorien