2625 - High Quality CNC Machining Centres & Lathes, Welding & Cladding Machines plus other Toolroom Equipment previously used by Jordan Engineering Ltd - Phase 3
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 51
Los 1B: Fixture
Fixture
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 5: Mazak E – Tower 5 Axis Multi-tasking Turning / Milling Machine
Mazak E – Tower 5-Axis Multi-tasking Turning/Milling Machine with Matrix Control, Twin Vertical Chucks: 600mm diameter, X = 1,100mm, Y = 800mm, Z = 900mm, B-Axis: 150 Degrees, C-Axis: 360 Degrees, Speeds: 12,000rpm, 80-Position Toolchanger, Jet Coolant, (1) 600mm 4-Jaw Chuck & Chiller. S/No. 190766 (02/2007)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 14: Giewont Vertical FYA41M Milling Machine
Giewont Vertical FYA41M Milling Machine, Table Size 2m x 400mm, 50 International Tooling. S/No. 11/57 (1985)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Los 23: Makita Bench Grinder
Makita Bench Grinder
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 24: DEA Co-ordinated Measuring Machine
DEA Co-ordinated Measuring Machine, Table Size 650mm x 890mm. S/No. 00628
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 25: Mitutoyo FN905 Co-ordinated Measuring Machine
Mitutoyo FN905 Co-ordinated Measuring Machine, Table Size 1m x 750mm. S/No. 0706541
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 33: Qty of Metric Micrometers & Verniers
Qty of Metric Micrometers & Verniers
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 34: Set of Imperial Micrometers 0 – 1’ - 11 – 12’
Set of Imperial Micrometers 0 – 1’ - 11 – 12’
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 35: Set of Imperial Micrometers 0 – 1’ – 11 – 12’
Set of Imperial Micrometers 0 – 1’ – 11 – 12’
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 36: Set of Imperial Micrometers 0 – 1’ – 11 – 12’’
Set of Imperial Micrometers 0 – 1’ – 11 – 12’’
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.