2525 - Large Capacity CNC & Conventional Machine Tools no longer required due to the Restructuring at The Cordell Group Ltd

Butler Elgamill Hi Power CNC Floor Type Milling Machine, Fanuc 21i-M CNC Control, Long Traverse 6000mm, Vertical Traverse 2200mm, Cross Traverse 1000mm, Spindle Speeds 2000rpm Spindle Taper 50 International complete with Double Knuckle Universal Head, (2) T Slotted Floor Plates, 3500 x 2000mm, Operator Platform.

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Butler Elgamill Hi Power L, Floor Type Milling Machine, Long Traverse 4200mm, Vertical Traverse 2100mm, Cross Traverse 1000mm, Spindle Speeds 2000rpm, Spindle Taper 50 International complete with 50 International Double Knuckle Universal Head With Power Draw Bar, 3 Axis DRO, T Slotted Floor Plate 4000 x 2500mm, S/No. 27723

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

2540 x 2025mm Powered Rotary Table complete with 1500mm Linear Traverse, Pendent Controlled.

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Webster & Bennett 72” Elevating Rail Vertical Borer, Model EV, Table Diameter 1950mm, Maximum Swing 2050mm, Maximum Height Under Cross Rail 1280mm, Turret Vertical Traverse 965mm, Turret Cross Traverse 1270mm, Turret Swivels 40 Degrees Each Way, Table Speeds 3.8 – 83 rpm, Feeds 0.002 – 0.049 Inch Per Rev, complete With 4 Table Jaws, 3 Tool Holders, 2 Axis DRO, Safety Guards, Motor 30 Hp, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 4300 x 4500 x 3700mm, Approximate Weight 19,000kg, S/No. 5602-3

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Webster & Bennett 60” Vertical Borer, Model DH, Table Diameter 1650mm, Maximum Swing 1750mm, Height Under Cross Rail 830mm, Turret Vertical Traverse 865mm, Turret Cross Traverse 1000mm, Turret Swivels 40 Degrees Each Way, Table Speeds 4.5 – 100rpm, Feeds 0.005 – 0.25 inch Per Rev, Complete with (5) Tool Holders, 2 Axis DRO, 4 Table Jaws, Safety guards, Motor 20HP, Approximate Dimensions 3200 x 4200 x 2500mm, Approximate Weight 9500kg, S/No. 3188-4

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Giddings & Lewis Table Type Horizontal Borer, Model 340T, Table 2500 x 1220mm, Long Traverse 1750mm, Cross Traverse 2250mm, Vertical Traverse 1650mm, Spindle Speeds 10 – 1300rpm, Spindle Traverse 750mm, Spindle Diameter 100mm, Spindle Taper 50 Int, Feeds 0.002 – 0.25 Inch Per Rev, Complete With Pendent Control, Safety Brake, Outriggers, Approximate Dimensions 3800 x 6000 x 3400mm, Approximate Weight 15,000kg, S/No. 520-606-60

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Giddings & Lewis Air Lift Table 1830 x 1220mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Scharmann Table Type Horizontal Borer, Model FB125NC, Rotary Table 1400 x 1200mm, Long Traverse 2000mm, Cross Traverse 1800mm, Vertical Traverse 1000mm, Spindle Traverse 800mm, Spindle Diameter 125mm, Spindle Taper 50 Int, Spindle Speeds 7.5 – 1500rpm, Complete with Pendent Control, 3 Axis DRO, Safety Brake, Outriggers, Approximate Dimensions 3900 x 5700 x 3800mm, Approximate Weight 17,000kg, S/No. 64151095

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Kearns Wide Bed Table Type Horizontal Borer Model D3WB, Table 3960 x 1220mm, Long Traverse 1500mm, Cross Traverse 3500mm, Vertical Traverse 1470mm, Spindle Diameter 100mm, Spindle Taper 50 International, Spindle Speeds 3.9 – 825rpm, Spindle Traverse 750mm, Facing Head Diameter 685mm, Facing Slide Traverse 270mm, Facing Head Speeds 3.9 – 202rpm, Complete With Screw Cutting, 3 Axis DRO, Double Outrigger Supports, Pendent Control, Motor 20HP, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 6100 x 6700 x 4300mm, Approximate Weight 35,000kg, S/No. 5510

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of ...

Droop & Rein Heavy Duty Vertical Milling Machine with Swivelling Vertical Head, Model FS130gku, Table 2400 x 995mm, Long Traverse 1700mm, Cross Traverse 870mm, Vertical Traverse 800mm Quill Traverse 180mm, Spindle Speeds 20 – 1000rpm, Spindle Taper 50 International, Quill Diameter 200mm, Feeds 6 – 3000mm per Min, Complete with Right Angled Milling Head, Power Draw Bar, 3 Axis DRO, Approximate Dimensions 4100 x 3400 x 3800mm, Approximate Weight 22,000kg, S/No. 3036

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.