2463 - CNC Grinders and Turning Equipment used in the Production of Crankshafts no longer required by M&S Crankshafts Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Items are located in Lincoln & Manchester.
Lots located at Manchester, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lots 106, 112 and 114 located at Lincoln will be dismantled by our maintenance and loaded on to purchasers transport.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 34
Los 110: Mitchell Gap Bed Lathe
Mitchell Gap Bed Lathe with M Dro DRO, 24” 3 Jaw Chuck, 3 point Steady, Distance between Centres 100’’
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 111: Heckett Spliner Machine
Heckett Spliner Machine with Newall SA 100 DRO, 10” 3 Jaw Chuck, Distance between Centres 84”. S/No. 262 316 67
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 112: Skoda SRM 100 x 5000 Heavy Duty Lathe
Skoda SRM 100 x 5000 Heavy Duty Lathe with One Roller Steady, Swing 1000mm x 5000BC, S/No. 21111 (1976)
Please Note: This lot is located in Lincoln and will be
dismantled by our maintenance and loaded on to purchasers
transport.
Los 113: Dunbar & Cook Crankmaster MK2 Pin Lathe
Dunbar & Cook Crankmaster MK2 Pin Lathe with Mitutoyo KA Counter DRO, Face Plate 24”, Distance between centres 76”, 2 Quadrant Fittings. S/No. 727
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 114: Morando Dual Purpose Lathe
Morando Dual Purpose Lathe, Centre and Pin Turning 5M BC, 1200mm Swing x 5000BC Offset Throw for Pin Turning 200mm, Steadies, Readout with Headstock, S/No. 55301 (1965)
Please Note: This lot is located in Lincoln and will be
dismantled by our maintenance and loaded on to purchasers
transport.
Los 116: Kitchen & Wade Manual Horizontal Borer
Kitchen & Wade Manual Horizontal Borer, Table Size 43” x 18”, Quill Length 12”
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 117: Nagel Type RP-ST Gun Drill
Nagel Type RP-ST Gun Drill, Table Size, 62” x 14” with Coolant System and Hydraulic Unit, S/No. 287993GC
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 118: Kitchen & Walker Model 50 E3 5ft Radial Arm Drill
Kitchen & Walker Model 50 E3 5ft Radial Arm Drill, Table Size 90” x 18”, S/No. 3268
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 119: Hydraulic Indexer
Hydraulic Indexer with 500mm Chuck and Hydraulic System
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 120: Accuramatic Surface Grinder
Accuramatic Surface Grinder 18” x 8” Magnetic Chuck with Coolant
Please Note: This lot is for spares or repairs only
Please Note: This lot is located in Manchester, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.