Przedmiot 12: SW Emag Type BA400 Twin Spindle 4-Axis Horizontal Machining Centre
Kończy się:
wtorek 27 wrz 2016 16:40 PM BST
Pozostały czas:
Aukcja zakończona
Musisz się zalogować, aby móc licytować
Podbicie: £ 250
Oferty: 153
Premia kupującego: 16%
Stawka VAT: 20%
| Make: | SW Emag |
|---|
Pełny opis działki
SW Emag Type BA400 Twin Spindle 4-Axis Horizontal Machining Centre with Fanuc 16i MB Control System, Maximum Spindle speed 10,000 rpm, Spindle Taper HSK 63, distance between spindles 400mm, axis travels X 400mm Y 450mm Z 400mm, 4th axis 180 degrees, 60 Station ATC 30 per spindle Maximum tool weight 10kg, Rapid Feed rates 30m/min, Fitted with Blum Laser Probing Swarf Conveyor, Knoll Coolant Filtration System, S/No. 1640502 (2007) (Please Note: There is No Probe)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser
Kluczowe warunki / informacje eksportowe
Please Note: All lots are located in Huddersfield, West
Yorkshire.
Unfortunately there are no loading facilities available on
site. Dismantling & Loading will be at the cost of the
purchaser.
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.