3144 - Sheet Metal & Fabrication Machinery, Inspection Equipment, Compressors no longer required by The Premier Group

Engineering

L'enchère s'est terminée le

2022-08-23 10:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in Coventry, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2022-09-23 17:00:00.0

'Date limite d''apurement'

2022-10-31 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-7 de 7

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 33: Atlas Copco 6A 18 VSD+ FF Air Compressor

Atlas Copco GA 18 VSD + FF Air Compressor, Max Working Pressure 12.75 Bar, Motor Power 18KW, S/N. API825855 (2015). Country of Origin: Belgium

Please Note: This lot is located in Coventry, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 34: SIP Airmate Receiver Mounted Piston Compressor

SIP Airmate Receiver Mounted Piston Compressor, 9 Bar, 240V, 100 Ltr Air Receiver Tank, S/N. 4648060004

Please Note: This lot is located in Coventry, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) ...

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 44: Boge S20 Air Compressor

Boge S20 Air Compressor, Max Working Pressure 8 Bar, Motor Power 15KW, S/N. 52282 (2003)

Please Note: These lots are located in Coventry, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 45: Atlas Copco GA 15 FF Packaged Air Compressor

Atlas Copco GA 15 FF Packaged Air Compressor, Working Pressure 15 Bar, S/N CAI822480 (2015)

Please Note: These lots are located in Coventry, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.


Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis ...

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 46: Boge S15 Air Compressor

Boge S15 Air Compressor, Maximum Working Pressure 8 Bar, Motor Power 11KW, S/N 561080 (2005)

Please Note: These lots are located in Coventry, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis ...

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 47: Boge S15 Air Compressor

Boge S15 Air Compressor, Maximum Working Pressure 8 Bar, Motor Power 11KW, S/N 44495 (2002)

Please Note: These lots are located in Coventry, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis ...

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 48: Boge S15 Air Compressor

Boge S15 Air Compressor, Maximum Working Pressure 8 Bar, Motor Power 11KW, S/N 502760 (2004)

Please Note: These lots are located in Coventry, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.


Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis ...

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories