3127 - Oil & Gas Valve Manufacturing Machines, CNC Lathes, Table Type Boring Mills, Machining Centres, Toolroom Machinery, Cranes no longer required by a leading Global Valve Manufacturer
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 75
Lot 1: Danobat Valvecentre 6VT
Danobat Valvecentre 6VT, S/No. 320003 (2008) with Fanuc Series 180i-TB Control, Max Diameter over Longitudinal Guides 1350mm, Max Diameter over Cross Guides 1300mm, Spindle Bore Diameter 290mm, Max Main Spindle Speed 400rpm, Max Rotation Torque 4.775Nm, Longitudinal Slide Travel 1420mm, Cross Slide Travel 960mm, Main Spindle Nose DIN 55026 (28”) Country of Origin: Spain
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus ...
Lot 2: Danobat Valvecentre 5VT
Danobat Valvecentre 5VT, S/No. L-855 (2002) with Fanuc Series 16i-T Control, Max Diameter over Longitudinal Guides 1350mm, Max Diameter over Cross Guides 1080mm, Spindle Bore Diameter 210mm, Max Main Spindle Speed 600rpm, Max Rotation Torque 4.038Nm, Longitudinal Slide Travel 1359mm, Cross Slide Travel 870mm, Main Spindle Nose DIN 55026 (20”) Country of Origin: Spain
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be ...
Lot 3: Takisawa EX110 CNC Lathe
Takisawa EX110 CNC Lathe, S/No. CI02E11256 (2008) with Fanuc 21i-TB Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from ...
Lot 4: Takisawa EX110 CNC Lathe
Takisawa EX110 CNC Lathe, S/No. CI02E11258 (2008) with Fanuc 21i-TB Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from ...
Lot 5: Takisawa EX110 CNC Lathe
Takisawa EX110 CNC Lathe, S/No. CI05E11336 (2008) with Fanuc 21i-TB Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from ...
Lot 6: Lead Microcut HBM-4 Boring Mill
Lead Microcut HBM-4 Boring Mill, S/No. 074001068 (2007) Fanuc 18i-MB Control, X/Y/Z/B/W=2200/1600/1600/550mm/1 Deg, Table Size 1200mm x 1500mm x 5000kgs, Spindle Taper ISO No. 50, Spindle Speeds 35 - 3000rpm, 60 ATC, Spindle Diameter 110mm. Country of Origin: Taiwan
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 6A: Cogsdill Facing and In Line Pocket Boring Bars
Cogsdill Facing and In Line Pocket Boring Bars, Incl T7520 Recon Facing and Contouring Head Machine Collars, T7514 Seat Pocket Boring Bar and Extension Piece
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 6B: ITS CH8 Contouring and Facing Head
ITS CH8 Contouring and Facing Head, Max Speed 800rpm, Slide Stroke 38.1mm, Incl Machine Collar, Slide and Boring Bar Holders. Country of Origin: U.S.A.
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 6, 6A & 6B
Lot 6 - Lead Microcut HBM-4 Boring Mill, S/No. 074001068 (2007) Fanuc 18i-MB Control, X/Y/Z/B/W=2200/1600/1600/550mm/1 Deg, Table Size 1200mm x 1500mm x 5000kgs, Spindle Taper ISO No. 50, Spindle Speeds 35 - 3000rpm, 60 ATC, Spindle Diameter 110mm. Country of Origin: Taiwan
Lot 6A - Cogsdill Facing and In Line Pocket Boring Bars, Incl T7520 Recon Facing and Contouring Head Machine Collars, T7514 Seat Pocket Boring Bar and Extension Piece
Lot 6B - ITS CH8 Contouring and Facing Head, Max Speed 800rpm, Slide Stroke 38.1mm, Incl Machine Collar, Slide and Boring Bar Holders. Country of Origin: U.S.A.
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 6 | Lead Microcut HBM-4 Boring Mill |
| 6A | Cogsdill Facing and In Line Pocket Boring Bars |
| 6B | ITS CH8 Contouring and Facing Head |
Lot 7: HAAS SL40 BCE Big Bore CNC Lathe
HAAS SL40 BCE Big Bore CNC Lathe, S/No. 73471 (2008), Filtermist, 3-Jaw Chuck, 10 Station Turret, Filtermist, Swarf Conveyor. Country of Origin: U.S.A.
Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All ...