Deckel Maho DMU 60P Hi-Dyn 5 Axis CNC Machining Centre (2005) with Heidenhain Heros iTNC530 Control, CAT40 Taper, 630mm Diameter Table, 60 Tool ATC, Swarf Conveyor, Coolant Filtration. S/No. 1116-000201-3

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

CAT 40 Tooling suitable for Deckel Maho with Universal 3D Tester

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 2 & 2A

2 - Deckel Maho DMU 60P Hi-Dyn 5 Axis CNC Machining Centre (2005) with Heidenhain Heros iTNC530 Control, CAT40 Taper, 630mm Diameter Table, 60 Tool ATC, Swarf Conveyor, Coolant Filtration. S/No. 1116-000201-3

2A - CAT 40 Tooling suitable for Deckel Maho with Universal 3D Tester

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Deckel Maho DMU125P 5 Axis CNC Machining Centre (1998) with Mill Plus CNC Control, 1000mm Table Diameter, CAT40, 60 Tool ATC, Swarf Conveyor, Coolant Filtration. S/No. 1098-120342-3

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

CAT 40 Tooling suitable for Deckel Maho with Universal 3D Tester

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Spare Table

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 3, 3A & 3B

3 - Deckel Maho DMU125P 5 Axis CNC Machining Centre (1998) with Mill Plus CNC Control, 1000mm Table Diameter, CAT40, 60 Tool ATC, Swarf Conveyor, Coolant Filtration. S/No. 1098-120342-3

3A - CAT 40 Tooling suitable for Deckel Maho with Universal 3D Tester

3B - Spare Table

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Nicolas Correa CF22/25 CNC Bed Milling Machining Centre (1998) with Heidenhain TNC 426 PB Control, Table size 2500 x 700mm, ISO 50 Spindle Taper. S/No. 9671402

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of CAT 50 Tooling suitable for Correa

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 4 & 4A

4 - Nicolas Correa CF22/25 CNC Bed Milling Machining Centre (1998) with Heidenhain TNC 426 PB Control, Table size 2500 x 700mm, ISO 50 Spindle Taper. S/No. 9671402

4A - Qty of CAT 50 Tooling suitable for Correa

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Huron GXB411F CNC Milling Machine (1995) with Heidenhain TNC415B Control, Table size 1300mm x 700mm. S/No. 94-12-102

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of CAT 40 Tooling suitable for Huron

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of CAT 40 Tooling suitable for Huron

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of CAT 40 Tooling suitable for Huron

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Renishaw MA2 Probe suitable for Huron

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 5, 5A, 5B, 5C & 5D

5 - Huron GXB411F CNC Milling Machine (1995) with Heidenhain TNC415B Control, Table size 1300mm x 700mm. S/No. 94-12-102

5A - Qty of CAT 40 Tooling suitable for Huron

5B - Qty of CAT 40 Tooling suitable for Huron

5C - Qty of CAT 40 Tooling suitable for Huron

5D - Renishaw MA2 Probe suitable for Huron

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Matsuura MC600VF Vertical Machining Centre (1997) with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of BT 40 Tooling suitable for Matsuura with Universal 3D Tester

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of BT 40 Tooling suitable for Matsuura

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 6, 6A & 6B

6 - Matsuura MC600VF Vertical Machining Centre (1997) with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285

6A - Qty of BT 40 Tooling suitable for Matsuura with Universal 3D Tester

6B - Qty of BT 40 Tooling suitable for Matsuura

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Newall No. 2436 Jig Borer, Table size 1000 x 600mm, Newall Dro, Spindle Speeds 40 – 2500rpm. S/No. 633JBM-2443 – 141

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Swivel Table for Newall Borer 500mm x 500mm

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 7 & 7A

7 - Newall No. 2436 Jig Borer, Table size 1000 x 600mm, Newall Dro, Spindle Speeds 40 – 2500rpm. S/No. 633JBM-2443 – 141

7A - Swivel Table for Newall Borer 500mm x 500mm

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Sima Model VOA Vertical Mill (1954), Table size 640 x 380mm, Newall Dro, Spindle Speeds 35 - 1500rpm. S/No. 197

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Scheme FYC-25 Milling Machine (1962) Table size 1160 x 260mm, 150mm Machine Vice. S/No. 011.12

Please Note: This lot is located in High Wycombe, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described