2859 - Deckel Maho, HAAS, Hitachi Seiki, Matchmaker & OKK Machining Centres, Mazak & XYZ CNC Lathes, ONA Spark Eroder and Ceruti Radial Drill no longer required

Engineering

Aukcja kończy się o

czwartek 6 lut 2020 at 03:00PM (GMT)
Dodaj do kalendarza

Pozostały czas

Gebotsfristverlängerung

Opis aukcji

Please Note: These lots are located in Birmingham, Motherwell, Redditch and Watford. Please see individual lots for loading information. All/Any tooling is being offered as specifically described.

Buyer's premium

Buyer's Premium will be charged at 18%.

VAT

Stawka VAT wynosi 20 %.

Seitenaufrufe

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Zaznacz poniższe pole i naciśnij potwierdź


* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.

Informacja dla kupujących

Ostateczna data płatności

10 lut 2020 at 17:00 (GMT)

Ostateczna data odbioru przedmiotu

20 lut 2020 at 17:00 (GMT)

Firmy transportowe

Firmy magazynowe

Przedmioty 1-10 z 39

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Kończy się:
06 lut 2020 16:10:00 GMT
Pozostały czas:
Licytacja zakończona
Podbicie:
£1000
Oferty:
41
Buyer's premium:
18%
Stawka VAT:
20%

Przedmiot 1: Deckel Maho DMU 70 EVO Linear 5 Axis Machining Centre

Deckel Maho DMU 70 EVO Linear 5 Axis Machining Centre with Heidenhain ITNC530 Control, Table Size 700mm x 500mm, 18,000 Spindle Speed, 60 ATC Tools, Laser Tool Setting, SK Tooling, Touch Probe DMG TS 649, Swarf Conveyor, Swarf Management System. S/No. 15455719694 (2009)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £500 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Kończy się:
06 lut 2020 15:10:00 GMT
Pozostały czas:
Licytacja zakończona
Podbicie:
£500
Oferty:
48
Buyer's premium:
18%
Stawka VAT:
20%

Przedmiot 2: Haas VF 4SS Vertical Machining Centre

Haas VF 4SS Vertical Machining Centre with Haas Control, Table size 52" x 19 1/2", 24 Station Tool Changer. S/No. 1136453 (01/2017)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £400 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Kończy się:
06 lut 2020 16:30:00 GMT
Pozostały czas:
Licytacja zakończona
Podbicie:
£500
Oferty:
18
Buyer's premium:
18%
Stawka VAT:
20%

Przedmiot 3: Haas VF-2 Vertical Machining Centre

Haas VF-2 Vertical Machining Centre with Haas Control, 4th Axis, Table Area: 914 x 356mm, X: 762mm, Y: 406mm, Z: 508mm, Spindle Taper: BT40, Spindle Speeds: to 7500rpm, Motor: 20hp (2005)

Please Note: This lot is located in Motherwell.  A dismantling and loading onto suitable vehicle charge of £400 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Kończy się:
06 lut 2020 16:00:00 GMT
Pozostały czas:
Licytacja zakończona
Podbicie:
£500
Oferty:
24
Buyer's premium:
18%
Stawka VAT:
20%

Przedmiot 4: Haas VF3 Vertical Machining Centre

Haas VF3 Vertical Machining Centre with Haas Control, 4th Axis, Table Area: 1219 x 457mm, X: 1016mm, Y: 508mm, Z: 635mm, Spindle Speed: 7500rpm, Spindle Taper: BT40, Motor: 20hp, 20 Station Tool Changer. (2002)

Please Note: This lot is located in Motherwell. A dismantling and loading onto suitable vehicle charge of £400 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Kończy się:
06 lut 2020 16:40:00 GMT
Pozostały czas:
Licytacja zakończona
Podbicie:
£250
Oferty:
48
Buyer's premium:
18%
Stawka VAT:
20%

Przedmiot 5: Haas TM-1P Vertical Machining Centre

Haas TM-1P Vertical Machining Centre with Haas Control, Table Size 1210mm x 270mm, 10 Station Tool Changer, BT40 Back End Tooling. S/No. 1101764 (01/2013)

Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Preview image
Kończy się:
06 lut 2020 15:40:00 GMT
Pozostały czas:
Licytacja zakończona
Podbicie:
£500
Oferty:
11
Buyer's premium:
18%
Stawka VAT:
20%

Przedmiot 6: Matchmaker Vertical Machining Centre 820

Matchmaker Vertical Machining Centre 820 with Fanuc OI-MD Control, Table Area: 950mm x 450mm, X: 820mm, Y: 520mm, Z: 510mm, Spindle Taper: BT40, Spindle Speeds: to 8000rpm, 20 Station Toolchanger. S/No. N432117002 (10/2011)

Please Note: This lot is located in Motherwell. A dismantling and loading onto suitable vehicle charge of £400 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Kończy się:
06 lut 2020 15:20:00 GMT
Pozostały czas:
Licytacja zakończona
Podbicie:
£500
Oferty:
19
Buyer's premium:
18%
Stawka VAT:
20%

Przedmiot 7: OKK HM-40 Horizontal Twin Pallet Machining Centre

OKK HM-40 Horizontal Twin Pallet Machining Centre with Fanuc 16i-M Control, Pallet Size 400 x 400mm, Full B Axis with 0.001 deg Table, 60 ATC, Renishaw MI 12 Interface (No Probe Included), High Pressure Through Spindle Coolant, BT40 Spindle Taper, 6,000rpm Spindle, Spare Spindle, Coolant Tank, Swarf Conveyor, (37) BT40 Toolholders (Back End Only), Machine Weight 9100kgs. S/No. 326 (1999) Manuals

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £450 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Kończy się:
06 lut 2020 17:10:00 GMT
Pozostały czas:
Licytacja zakończona
Podbicie:
£250
Oferty:
4
Buyer's premium:
18%
Stawka VAT:
20%

Przedmiot 8: Lagun Future 1800 Milling Machine

Lagun Future 1800 Milling Machine with Heidenhain TNC 360 Control, Table size 1.8m x 700mm, ISO 50 Back End Tooling, Cabinet with Tooling. S/No. 10044 (1998)

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £2100 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Uwaga: ten przedmiot jest również dostępny jako kombinacja.

*: Combination of lots 8 & 8A

Preview image
Kończy się:
06 lut 2020 17:10:00 GMT
Pozostały czas:
Licytacja zakończona
Podbicie:
£25
Oferty:
6
Buyer's premium:
18%
Stawka VAT:
20%

Przedmiot 8A: Qty 50 International Tooling

Qty 50 International Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Uwaga: ten przedmiot jest również dostępny jako kombinacja.

*: Combination of lots 8 & 8A

Preview image
Kończy się:
06 lut 2020 17:10:00 GMT
Pozostały czas:
Licytacja zakończona
Podbicie:
£250
Oferty:
28
Buyer's premium:
18%
Stawka VAT:
20%

Przedmiot *: Combination of lots 8 & 8A

Combination of lots 8 & 8A

8. Lagun Future 1800 Milling Machine with Heidenhain TNC 360 Control, Table size 1.8m x 700mm, ISO 50 Back End Tooling, Cabinet with Tooling. S/No. 10044 (1998)

8A. Qty 50 International Tooling

Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £2100 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Przedmioty w tej kombinacji

Przedmiot # Opis
Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Kategorie