3273 - Excellent Schumag Bright Bar Drawing Lines, Ton Bar Draw Benches, Straightening, Testing, Shotblast & Processing Equipment capable of running Rounds, Hexagonal, Square and Flat Bar previously used by Barrett Steel (formerly Aartee Bright Bar Ltd)
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 141
Lot * : Combination of lots 1A, 1B, 1C, 1D & 1E
100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling, Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector, Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Operator Control Panel, ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1A: Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999)
Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1B: 100 Ton Aetna Standard Bar Draw Bench
100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1C: Missler Model DEB-540CE Bandsaw
Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Open Control Panel
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1D: Scraven 100-Ton Anvil Bumper
Scraven 100-Ton Anvil Bumper with 13m Through-Feed Roller Table
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1E: Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener
Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener for up to 4” Square, 7” Flat, 4” Hex, Main Motor 224 KW, 460 Volt, 1130 RPM; Individual Vertical Motorized Adjustment; Roll Centers Adjustable; with 10M Bundler Accumulator Table
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot * : Combination of lots 2A, 2B, 2C & 2D
60 Ton Platt/Mair Bar Draw Bench, Single Chain, Single, Double & Triple Draw; Built-In Mair Push Pointer, Max. Length of Draw 9m; Main DC Motor 315 Kw, 500 Volt, 1460/1611RPM, Max Draw Diameter 4” Round, Spare Die Blocks, Spare Carriage-single and triple draw; Feed Table, Exit Transfer Conveyor, In-Line 4-Saw Mair Indexing Cut-to-Length System and accumulation table (1989), Tilghman Wheelabrator Through-Feed Shot Blast Chamber (1995), (4) Wheel 11kW Motors, Shot Blast Cabinet with Entry and Exit Skewed 48” Roller Conveyor for 2 bar handling, Dust Collector, Operator Control Panel, Infeed/Outfeed Transfer Tables, Bronx Model PBRV 6, 2 Roll/Twin Motor Bar Straightener (2 x Sets Spare Rolls), Capacity 4” Dia ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2A: Tilghman Wheelabrator 21m Through-Feed Shot Blast Chamber (1995)
Tilghman Wheelabrator Through-Feed Shot Blast Chamber (1995), (4) Wheel 11kW Motors, Shot Blast Cabinet with Entry and Exit Skewed 48” Roller Conveyor for 2 bar handling, Dust Collector, Operator Control Panel, Infeed/Outfeed Transfer Tables
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2B: 60 Ton Platt/Mair Bar Draw Bench
60 Ton Platt/Mair Bar Draw Bench, Single Chain, Single, Double & Triple Draw; Built-In Mair Push Pointer, Max. Length of Draw 9m; Main DC Motor 315 Kw, 500 Volt, 1460/1611RPM, Max Draw Diameter 4” Round, Spare Die Blocks, Spare Carriage-single and triple draw; Feed Table, Exit Transfer Conveyor, In-Line 4-Saw Mair Indexing Cut-to-Length System and accumulation table (1989)
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2C: 4 x Mair Splitting Saws (1989)
4 x Mair Splitting Saws (1989), Operator Control Panel, Infeed/Outfeed Transfer Tables
Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.