3142 - (4) Radiator Valve Mfg & Assembly Machines previously used by Rettig Ireland
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Auction Brochure
Please click here to view a Brochure for this Auction
Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 23.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 106
Lot *: Combination of Lots 10 & 10A
Combination of Lots 10 & 10A
Lot 10 - Wickman 1 3/4" - 6. Rebuilt by C&M to Rapide Specification in 2005 ( 59-4-D), Cucchi Loader 220C05 ( 2005) 4m with OP27, Length Detector, Air Push Reamer, Slide in 6, Milling Drive in Position 2 (head on shelves), External Broaching in Position 3, Pre Set Tooling, Screw Type Swarf Conveyor and Swarf Bins, Electric Coolant, S/N 15719
Lot 10A - Wickman 13/4” Attachments and Machine Accessories: Thread Milling Attachment – Ramp Recessing Attachment – Collets – Churchill Part Off Toolholder – C & M Drillholders – C & M Flatform Toolholders.
Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
10 | Wickman 1 3/4" Servo Drive Multi-Spindle Lathe |
10A | Wickman 13/4” Attachments and Machine Accessories |
Lot 11: Wickman 1" Servo Drive Multi-Spindle Lathe
Wickman 1"- 6. Rebuilt in 2005 by C& M ,Rapide, Camless Pneumatic Pick Up in Position 6, Flat Generator Position 4, Thread Milling Position 3, Cucchl Loader (2005), AC Spindle and Feed Motors , Screw Type Swarf Conveyor , Electric Coolant Pump, Variable Feed and Speed. S/N 59-8-B
Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 11A: Wickman 13/4” Drifting Attachment-Collets – C & M Flatform Toolholders – Form Tools & Drills
Wickman 13/4” Drifting Attachment-Collets – C & M Flatform Toolholders – Form Tools & Drills.
Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 12: C & M Rapid Tooling System with Acu-Rite DRO (Digital Read Out) (2005) (Used on Wickman Multi-spindle Lathes)
C & M Rapid Tooling System with Acu-Rite DRO (Digital Read Out) (2005) (Used on Wickman Multi-spindle Lathes).
Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 13: Wickman 1"- Servo Drive Multi-Spindle Lathe C&M Rapide
Wickman 1"-6 C&M Rapide (Rebuilt New in 2005), AC Spindle and Feed Motors, Reaming Slide in Centre Block Position 6, Flat Generating ( polygon) in Cross Slide 4, Thread Milling in CrossSslide 5, Pre Set Tooling , Electric Coolant, Screw type Swarf Conveyor and Swarf Bins, Cucchi Loader 216C05 - OP27 Control, Variable Feed and Speed S/N 59-1-C
Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 13A: Wickman 1” Machine Collets – C & M Flatform Toolholders – C & M Drillholders – Churchill Part Off Toolholder – Form Tools
Wickman 1” Machine Collets – C & M Flatform Toolholders – C & M Drillholders – Churchill Part Off Toolholder – Form Tools
Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 14: Arboga-Darenth Swarf System with PLC
Arboga-Darenth Swarf System with PLC (2006).
Consists of the following:
Model TRS2 Roller Chain Drag Conveyor – Model SB Bar End Separator – Model TL2M Hinged Steel Conveyor – Model HD50 Horizontal Swarf Centrifuge
Darenth Arboga Type SB Centrifugal Swarf/Oil Separation System, S/N 1014-147 (2006)
Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 15: Camas Multi-Station TRV Assembly Machine
Camas Multi-Station TRV Assembly Machine, S/N GR 7484 (2006)
Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 16: Camas Multi-Station Assembly Machine
Camas Multi-Station Assembly Machine, S/N GR 741 (2005)
Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 17: Tampoprint Valve Body 2-Colour Printing Machine
Tampoprint Valve Body 2-Colour Printing Machine, S/N RTI439
Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.