3128B - Private Treaty - Varnishing Lacquer Application/Cleaning Systems, Viessmann CHP Plants & Air Handling Systems formerly used by Safilo in the production of Designer Optical Sunglasses & Goggles

Engineering

L'enchère s'est terminée le

jeudi 8 déc. 2022 at 09:41AM (GMT)

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in Slovenia. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 22%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Lots 1-3 de 3

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 277: DBM Technologie FAP 60 Varnish Lacquer Spray Line

DBM Technologie FAP 60 Varnish Lacquer Spray Line, To include 2 x wet back hanger frame rotating varnish spray tanks (hanger frame size appx 1000 mm long), Varnish tank room with 5 x diaphragm pumps, 2 x Destatic Top-Spray static eliminators, Drying oven to outfeed manual take off, Electrical control panel with Siemens touch screen control, Associated tanks, pumps and chemical units, Varnish spray line. S/No. 2009011 (2009). Country of Origin: Italy

PPlease Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 278: MEG Kombi 437 8/A Pre Varnish Line Rack Hanger Wash Dipping System

MEG Kombi 437 8/A Pre Varnish Line Rack Hanger Wash Dipping System, 7 dip tanks 1 of which is ultrasonic, warm and cold clean water plus chemical soap wash tank, Siemens simatic touch screen control, Chemical wash tanks and pumps, 6 x filter housings, Aqua Ionic UV steriliser, Manual take off to varnish spray line, Wash line. S/No. 056 09E (2009). Country of Origin: Italy

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 282: itec Wet Back Varnish Line Filtration Recovery System

itec Wet Back Varnish Line Filtration Recovery System, To include 3 x Plastic Tanks approx size 2.5  diameter x 4m high, Sammy SM4501020 Filter Press (S/No. 398 (2014) Control Cabinet with Siemens Simatic HMI Touch Screen Control, Hach SI974 pH meters x 2, Technol Atlantic 60/C 440 ltr Filter Unit with Associated Pumps and Valves. Country of Origin: Italy

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories