3127 - Oil & Gas Valve Manufacturing Machines, CNC Lathes, Table Type Boring Mills, Machining Centres, Toolroom Machinery, Cranes no longer required by a leading Global Valve Manufacturer

Engineering

L'enchère s'est terminée le

jeudi 21 juil. 2022 at 03:00PM (BST)

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

25 juil. 2022 at 17:00 (BST)

'Date limite d''apurement'

4 août 2022 at 17:00 (BST)

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-10 de 75

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
21 juil. 2022 18:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
£2500
Enchères:
46
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1: Danobat Valvecentre 6VT

Danobat Valvecentre 6VT, S/No. 320003 (2008) with Fanuc Series 180i-TB Control, Max Diameter over Longitudinal Guides 1350mm, Max Diameter over Cross Guides 1300mm, Spindle Bore Diameter 290mm, Max Main Spindle Speed 400rpm, Max Rotation Torque 4.775Nm, Longitudinal Slide Travel 1420mm, Cross Slide Travel 960mm, Main Spindle Nose DIN 55026 (28”) Country of Origin: Spain

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus ...

Preview image
Fin:
21 juil. 2022 18:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£2500
Enchères:
32
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 2: Danobat Valvecentre 5VT

Danobat Valvecentre 5VT, S/No. L-855 (2002) with Fanuc Series 16i-T Control, Max Diameter over Longitudinal Guides 1350mm, Max Diameter over Cross Guides 1080mm, Spindle Bore Diameter 210mm, Max Main Spindle Speed 600rpm, Max Rotation Torque 4.038Nm, Longitudinal Slide Travel 1359mm, Cross Slide Travel 870mm, Main Spindle Nose DIN 55026 (20”) Country of Origin: Spain

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be ...

Preview image
Fin:
21 juil. 2022 16:10:00 BST
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
73
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 3: Takisawa EX110 CNC Lathe

Takisawa EX110 CNC Lathe, S/No. CI02E11256 (2008) with Fanuc 21i-TB Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from ...

Preview image
Fin:
21 juil. 2022 16:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
62
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 4: Takisawa EX110 CNC Lathe

Takisawa EX110 CNC Lathe, S/No. CI02E11258 (2008) with Fanuc 21i-TB Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from ...

Preview image
Fin:
21 juil. 2022 16:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
58
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 5: Takisawa EX110 CNC Lathe

Takisawa EX110 CNC Lathe, S/No. CI05E11336 (2008) with Fanuc 21i-TB Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from ...

Preview image
Fin:
21 juil. 2022 16:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
32
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 6: Lead Microcut HBM-4 Boring Mill

Lead Microcut HBM-4 Boring Mill, S/No. 074001068 (2007) Fanuc 18i-MB Control, X/Y/Z/B/W=2200/1600/1600/550mm/1 Deg, Table Size 1200mm x 1500mm x 5000kgs, Spindle Taper ISO No. 50, Spindle Speeds 35 - 3000rpm, 60 ATC, Spindle Diameter 110mm. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of lots 6, 6A & 6B

Preview image
Fin:
21 juil. 2022 16:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
8
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 6A: Cogsdill Facing and In Line Pocket Boring Bars

Cogsdill Facing and In Line Pocket Boring Bars, Incl T7520 Recon Facing and Contouring Head Machine Collars, T7514 Seat Pocket Boring Bar and Extension Piece

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of lots 6, 6A & 6B

Preview image
Fin:
21 juil. 2022 16:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
6
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 6B: ITS CH8 Contouring and Facing Head

ITS CH8 Contouring and Facing Head, Max Speed 800rpm, Slide Stroke 38.1mm, Incl Machine Collar, Slide and Boring Bar Holders. Country of Origin: U.S.A.

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of lots 6, 6A & 6B

Preview image
Fin:
21 juil. 2022 16:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
26
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot *: Combination of lots 6, 6A & 6B

Lot 6 - Lead Microcut HBM-4 Boring Mill, S/No. 074001068 (2007) Fanuc 18i-MB Control, X/Y/Z/B/W=2200/1600/1600/550mm/1 Deg, Table Size 1200mm x 1500mm x 5000kgs, Spindle Taper ISO No. 50, Spindle Speeds 35 - 3000rpm, 60 ATC, Spindle Diameter 110mm. Country of Origin: Taiwan

Lot 6A - Cogsdill Facing and In Line Pocket Boring Bars, Incl T7520 Recon Facing and Contouring Head Machine Collars, T7514 Seat Pocket Boring Bar and Extension Piece

Lot 6B - ITS CH8 Contouring and Facing Head, Max Speed 800rpm, Slide Stroke 38.1mm, Incl Machine Collar, Slide and Boring Bar Holders. Country of Origin: U.S.A.

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling ...

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

N° de lot Description
Preview image
Fin:
21 juil. 2022 17:10:00 BST
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
36
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 7: HAAS SL40 BCE Big Bore CNC Lathe

HAAS SL40 BCE Big Bore CNC Lathe, S/No. 73471 (2008), Filtermist, 3-Jaw Chuck, 10 Station Turret, Filtermist, Swarf Conveyor. Country of Origin: U.S.A.

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All ...

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories