3004 - PRIVATE TREATY SALE - Epoxy Resin Moulding Lines, Varnish Spray Lines and Cleaning Systems formerly used in the Production of Designer Optical Sunglasses & Goggles
Engineering
Descripción de la subasta
Please Note: These lots are located in Slovenia. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Prima del comprador
A los compradores Premium se les cobrará un 18.00%.
IVA
El IVA ascenderá a un 22.00%.
Vista de horas
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Tenga en cuenta: - Cualquier traducción mediante Google Translate no está garantizada como una traducción precisa y es solo para fines de guía. La descripción del lote en inglés es la descripción predominante y se le da el mejor conocimiento del subastador. Sin embargo, la precisión no está garantizada y el comprador debe verificarla antes de hacer una oferta.
Aviso a compradores
Fecha final de expedición
Transportistas
Empresas de almacenamiento
Exportar / Importar desde el Reino Unido detalles
Lotes 1-10 de 10
Lote 273: Epoxy Resin Mould Manufacture Line
Epoxy Resin Mould Manufacture Line, To include Demak resin and catalyst (hardener) jacketed melting cylinders with vacuum pumps, Manual infeed / outfeed mould set up roller ball table, Epoxy resin injection mould unit, 4 tier J shaped conveyor to mould curing oven. Mould cure oven is Grega-JK 8 position 24kW curing oven S/no 001/20 (2020) Touch screen control, Oven infeed uplifting roller ball table. Line control via Siemens Simatic touch screen control, Associated control panels and pumps
Acceptance of the final bid is subject to confirmation by the Seller.
Offers are invited for this equipment, please contact our office on +44 (0) 121 328 2424 or email: info@cottandco.com
Please Note: This lot is located in ...
Lote 274: Epoxy Resin Moulding Line for moulding spectacle parts
Epoxy Resin Moulding Line for moulding spectacle parts, To include manual 10 station infeed loading bays, Demak CV 600 ASE resin and hardener mixing and metering skid mounted system with heater and vacuum pumps (S/no 11486 yr 2013) Mould clamp and injection units, Boiso EUP-T 10300/150 thru fed curing oven, Temp 150°C (14.407 yr 2000) Mould unclamp unit for manual take off, Siemens operator control panel, Electrical cabinets
Acceptance of the final bid is subject to confirmation by the Seller.
Offers are invited for this equipment, please contact our office on +44 (0) 121 328 2424 or email: info@cottandco.com
Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite. Dismantling ...
Lote 275: Epoxy Resin Moulding Line for moulding spectacle parts
Epoxy Resin Moulding Line for moulding spectacle parts. To include manual 8 station infeed loading bays on pallets size 600 mm square, Rear roller conveyor to mould hydraulic clamp unit, Epoxy resin mould injector, 7 x epoxy resin and hardener material melting vessals (note some agitator motors missing) 2 x epoxy resin drum warmer units, U shaped drying/curing tunnel oven appx size 15 meter x 4 meter, Outfeed mould pallet unclamp unit to manual mould take off conveyor. Electrical cabinet and Siemens control panel for operation, Capacity appx 50 mould /hr
Acceptance of the final bid is subject to confirmation by the Seller.
Offers are invited for this equipment, please contact our office on +44 (0) 121 328 2424 ...
Lote 276: Epoxy Resin Moulding Line for moulding spectacle parts
Epoxy Resin Moulding Line for moulding spectacle parts. To include manual 6 station infeed loading bays on pallets size 600 mm square, Rear roller conveyor to mould hydraulic clamp unit, Epoxy resin mould injector, 7 x epoxy resin and hardener material melting vessals, Advanced Dispensing Systems RE01 material melters, 2 x epoxy resin drum warmer units, U shaped drying/curing tunnel oven appx size 15 meter x 4 meter, Outfeed mould pallet unclamp unit to manual mould take off conveyor. Electrical cabinet and Siemens control panel for operation, Capacity appx 50 mould /hr
Acceptance of the final bid is subject to confirmation by the Seller.
Offers are invited for this equipment, please contact our office on +44 ...
Lote 277: DBM Technologie FAP 60 Varnish Lacquer Spray Line
DBM Technologie FAP 60 Varnish Lacquer Spray Line, To include 2 x wet back hanger frame rotating varnish spray tanks (hanger frame size appx 1000 mm long), Varnish tank room with 5 x diaphram pumps, 2 x Destatic Top-Spray static eliminators, Drying oven to outfeed manual take off, Electrical control panel with Siemens touch screen control, Associated tanks, pumps and chemical units, Varnish spray liine S/no 2009011 (2009)
Acceptance of the final bid is subject to confirmation by the Seller.
Offers are invited for this equipment, please contact our office on +44 (0) 121 328 2424 or email: info@cottandco.com
Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite. Dismantling ...
Lote 278: MEG Kombi 437 8/A Pre Varnish Line Rack Hanger Wash Dipping System
MEG Kombi 437 8/A Pre Varnish Line Rack Hanger Wash Dipping System, 7 dip tanks 1 of which is ultrasonic, warm and cold clean water plus chemical soap wash tank, Siemens simatic touch screen control, Chemical wash tanks and pumps, 6 x filter housings, Aqua Ionic UV steriliser, Manual take off to varnish spray line, Wash line S/no 056 09E (2009)
Acceptance of the final bid is subject to confirmation by the Seller.
Offers are invited for this equipment, please contact our office on +44 (0) 121 328 2424 or email: info@cottandco.com
Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being ...
Lote 279: Itas Thermal Oxidiser, Type MHP, Model IT151/MV/8
Itas Thermal Oxidiser, Type MHP, Model IT151/MV/8, Natural gas fired (3 unit) Nichias Corp Solventclean VOC Concentrator type SCB.4200.40XM (2010) CBI 54 air intake fan unit. S/no of oxidiser 1433 (2010) itas control room building with all associated controls for oxidiser
Acceptance of the final bid is subject to confirmation by the Seller.
Offers are invited for this equipment, please contact our office on +44 (0) 121 328 2424 or email: info@cottandco.com
Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lote 280: Varnish Rack Dipping Cleaner System
Varnish Rack Dipping Cleaner System, Siemens simatic OP7 control, Electric cabinet, pumps and valves
Acceptance of the final bid is subject to confirmation by the Seller.
Offers are invited for this equipment, please contact our office on +44 (0) 121 328 2424 or email: info@cottandco.com
Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lote 281: Techgroup Modual 470/4 Varnish Rack Dip Cleaning System
Techgroup Modual 470/4 Varnish Rack Dip Cleaning System, Siemens control panel, Electrical cabinets, pumps and valves, S/no 04067 (2004)
Acceptance of the final bid is subject to confirmation by the Seller.
Offers are invited for this equipment, please contact our office on +44 (0) 121 328 2424 or email: info@cottandco.com
Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lote 282: itec Wet Back Varnish Line Filtration Recovery System
itec Wet Back Varnish Line Filtration Recovery System, To include 3 x plastic tanks appx size 2.5 mtr diameter x 4 mtr high, Sammy SM4501020 filter press (s/no 398 yr 2014) Control cabinet with Siemens Simatic HMI touch screen control, Hach SI974 pH meters x 2, Technol Atlantic 60/C 440 ltr filter unit with associated pumps and valves
Acceptance of the final bid is subject to confirmation by the Seller.
Offers are invited for this equipment, please contact our office on +44 (0) 121 328 2424 or email: info@cottandco.com
Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered ...