2866 - Wickman Multi-spindle Lathes no longer required due to restructuring at a Turned Parts Company, Sweden
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Sweden. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 25.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-9 de 9
Lot 1: Wickman 626 Standard Multi-spindle Lathe
Wickman 626 Standard Multi-spindle Lathe, Hirth Type Coupling Machine with Siemens PLC System SIMATIC OP17, Direct Drive Machine, 6 Spindle Multi-spindle Lathe, 2 Independent Slides, Pick Up and Back Burr Attachment Position 6, Selection of Toolholders (1998)
Please Note: This lot is located in Sweden. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 2: Wickman 626 Standard Multi-spindle Lathe
Wickman 626 Stopper Multi-spindle Lathe, Hirth Type Coupling Machine with Siemens PLC System SIMATIC OP17, Direct Drive Machine, 6 Spindle Multispindle lathe, Spindle Stopper, 2 Independent Slides, Pick Up and Back Burr Attachment Position 6, Selection of Toolholders (1998)
Please Note: This lot is located in Sweden. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 3: Wickman 13/4" x 6 Multi-spindle Lathe
Wickman 13/4" x 6 Multi-spindle Lathe, Mechanical Clutch, 6 Cross Slides, 2 Independent Slides, Screw Type Conveyor, Spindle Drum Excellent, Pick Up and Back Burr Attachment Position, Full Threading, Attachment Position 5, Selection of Toolholders
Please Note: This lot is located in Sweden. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 4: Wickman 13/8" x 6 Multi-spindle Lathe
Wickman 13/8" x 6 Multi-spindle Lathe, Mechanical Clutch, 6 Cross Slides, 2 Independent Slides, Screw Type Conveyor, Spindle Drum Excellent, Pick Up and Back Burr Attachment Position, Thread Rolling Attachment, Selection of Toolholders
Please Note: This lot is located in Sweden. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 5: Wickman 13/8" x 6 Multi-spindle Lathe
Wickman 13/8" x 6 Multi-spindle Lathe, Mechanical Clutch, 6 Cross Slides, 2 Independent Slides, Screw Type Conveyor, Spindle Drum Excellent, Pick Up and Back Burr Attachment Position 6, Full Threading Attachment Position 5, Selection of Toolholders
Please Note: This lot is located in Sweden. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 6: Wickman 13/8" x 6 Multi-spindle Lathe
Wickman 13/8" x 6 Multi-spindle Lathe, Mechanical Clutch, 6 Cross Slides, 2 Independent Slides, Screw Type Conveyor, Spindle Drum Excellent, Pick Up and Back Burr Attachment Position 6, High Speed Drilling Attachment, Selection of Toolholders
Please Note: This lot is located in Sweden. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 7: Wickman 13/4" x 6 Multi-spindle Lathe
Wickman 13/4" x 6 Multi-spindle Lathe, Mechanical Clutch, 6 Cross Slides, 2 Independent Slides, Screw Type Conveyor, Empty Machine No Attachments or Toolholders
Please Note: This lot is located in Sweden. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 8: Wickman 1" x 6 Multi-spindle Lathe
Wickman 1" x 6 Multi-spindle Lathe, Mechanical Clutch, 6 Cross Slides, 2 Independent Slides, Spindle Drum Excellent, No Swarf Conveyor, Pick Up and Back Burr Attachment Position 6
Please Note: This lot is located in Sweden. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 9: Wickman 1" x 8 Multi-spindle Lathe
Wickman 1" x 8 Multi-spindle Lathe, Electric Clutch, Spindle Drum Excellent, No Swarf Conveyor
Please Note: This lot is located in Sweden. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.