2864 - Citizen & Star Sliding Head Lathes and Mazak Vertical Machining Centre surplus to on-going requirements

Engineering

'L''enchère se termine le'

mercredi 4 mars 2020 at 03:00PM (GMT)
Ajouter au calendrier

Temps restant

Temps écoulé

'Description de l''enchère'

Please Note: These lots are located in Birmingham and Gloucester. Please see individual lots for loading information and charges. 

Buyer's premium

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* 'Remarque: l''exactitude de toute traduction effectuée à l''aide de Google Translate n''est pas garantie. Une telle traduction n''est fournie qu''à titre indicatif. La description du lot en anglais est celle qui prévaut et repose sur les meilleures connaissances du commissaire des ventes. Toutefois, son exactitude n''est pas garantie et doit être vérifiée par l''acheteur avant l''enchère.'

Avis aux acheteurs

Date limite de paiement

6 mars 2020 at 17:00 (GMT)

'Date limite d''apurement'

19 mars 2020 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Lots 1-5 de 5

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Fin:
04 mars 2020 16:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
61
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1: Citizen A32VllPl Sliding Head CNC Lathe

Citizen A32VllPl Sliding Head CNC Lathe with Mitsubishi Meldas CNC Control, Main and Sub-spindle Maximum 8000rpm, Maximum Working Length 320mm, 4 Cross Drilling and 6 Turning Tools on Main Platten, 4 Rear and Front End Working Attachment on Platten, 4 Static Rear End Working Attachment, Cool Blaster CB510 High Pressure Coolant System, Fire Suppression, Absolent Filtration Unit. S/No. V54225 (06/2012) Iemca Boss 332 E/R Barfeed. S/No. 021230NA03 (2012)

Please Note: This lot is located in Gloucester. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any ...

Preview image
Fin:
04 mars 2020 16:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
67
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 2: Citizen A32VllPl Sliding Head CNC Lathe

Citizen A32VllPl Sliding Head CNC Lathe with Mitsubishi Meldas CNC Control, Main and Sub-spindle Maximum 8000rpm, Maximum Working Length 320mm, 4 Cross Drilling and 6 Turning Tools on Main Platten, 4 Rear and Front End Working Attachment on Platten, 4 Static Rear End Working Attachment, Cool Blaster CB510 High Pressure Coolant System, Fire Suppression, Parts Conveyor, Absolent Filtration Unit. S/No. V54224 (06/2012) Iemca Boss 332 E/R Barfeed. S/No. 01229NA02 (2012)

Please Note: This lot is located in Gloucester. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. ...

Preview image
Fin:
04 mars 2020 16:00:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
40
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 3: Star SR-20J Type C Sliding Head CNC Lathe

Star SR-20J Type C Sliding Head CNC Lathe with Fanuc 18i-TB Control System, Main Spindle 10000rpm, Sub-spindle 8000rpm, Maximum Turning length 205mm, 6 Turning and 5 Cross Drilling Tools for Front Working on Platten, 4 Front/Backend Working Attachment on Platten, 4 Rear End Working Tools, Fitted with Fire Suppression, FMB Minimag 20 Barfeed, Part of Detection, Parts Conveyor, Swarf Conveyor. S/No. 0540 (2010/6)

Please Note: This lot is located at Gloucester. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.All/Any tooling is being offered as specifically ...

Preview image
Fin:
04 mars 2020 15:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
29
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 4: Mazak Nexus 510C Vertical Machining Centre

Mazak Nexus 510C CNC Vertical Machining Centre with Mazatrol 640M Nexus Control System, Max Spindle Speed 12000rpm, Axis Travels X=1050mm Y=510mm Z=510mm 4th Axis 360 degrees, Din40 Spindle Taper, 30 Station ATC, Through Spindle Coolant, Kitagawa MR250 4th Axis, Swarf Conveyor. S/No 173185 (2005)

Please Note: There is no tooling with this lot.

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £400 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
04 mars 2020 15:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
10
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 5: LNS Express-220 Barfeed

LNS Express-220 Barfeed. S/No. 106279 (2005)

Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Catégories