Bridgeport Interact 1020X Vertical Machining Centre. Heidenhain 2500 Control. BT40 Spindle. 20 ATC. Table Travel 1000mm x 410mm. Spindle Travel 480mm, 7.5KW Motor. Facility for 4th Axis. Serial Number: 90030 (1991)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Harrison HS450 CNC Lathe with G E Fanuc Control. 440mm Swing over Bed. 1000mm Distance Between Centres. 82mm Spindle Bore. 8 Station Diplomatic Indexing Toolpost. 250mm 3 Jaw Chuck. Drive Plate. BSV-N 160-8/21 110/50.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Hitachi Seiki Type 4NE CNC Lathe with Fanuc System 6T Control, CAD/CAM System, 400mm Swing over Bed, 750mm Distance between Centres, 12 Station Turret, 3-Jaw Chuck & Tailstock

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Bridgeport Ezpath CNC Centre Lathe with Bridgeport ezpath Control. 18" Swing over Bed. 42" Distance Between Centres. 2" Spindle Bore. 3 Jaw Chuck (1997)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Please Note:- This Lot is for Spares or Repairs Only

Webster & Benett 36" EV Vertical Boring Machine, 42" Table Size. 52" Maximum Swing. 40" Daylight. 13.5 to 300 rpm. 2 Axis DRO.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Union Type BFT80 Horizontal Boring Machine with Spindle Diameter 3 5/32", Speeds: 180 to 1000rpm, Facing Head: 19 11/16", Facing Head Speeds: 2.8 to 125rpm, Table Size: 37" x 44", Long Traverse: 49", Cross Traverse: 39", Vertical Traverse: 35", Power to Table, 360 Degree Rotating Table & Tailstock

Please Note: There is no screw in the Tailstock

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Broadbent Schofield Gap Bed Centre Lathe, 32" Swing Over Bed, 52" Swing in Gap, 216"(18') Distance Between Centres, 4" Spindle Bore, Spindle Speeds: 10.5 to 750rpm, 3 & 4 Jaw Chucks, (2) Face Plates. Fixed and Travelling Steadies, Change Gears, S/No. 8467-70

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Newall Type 2443 Vertical Jig Boring Machine, Table Size: 42" x 24", Auxillary Table, Milling to Spindle, with Tooling

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Stanley Gap Bed Centre Lathe, 6' Between Centres, 21.1/2" Swing Over Bed, 37" Swing in Gap, 3.1/2" Spindle Bore, Spindle Speeds:13-400rpm, 20" 4 Jaw Chuck, 20" & 36" Face Plates, 3 Point Steady.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

TOS Type SN 71C Gap Bed Centre Lathe, 800mm Swing Over Bed, 920mm Swing In Gap, 400mm Swing Over Cross Slide, 2000mm Distance Between Centres, 80mm Spindle Bore, 200mm 4-Jaw Chuck, Rapid Power to Saddle.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.