3129 - Mori Seiki, Agie Charmilles, Machining and Toolroom Machinery Surplus to the on-going Requirements of The Pryme Group
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Dundee, Scotland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-6 de 6
Lot 1: Mori Seiki NH4000 DCG Twin Pallet Horizontal Machining Centre
Mori Seiki NH4000 DCG Twin Pallet Horizontal Machining Centre with Mori Seiki F31iA CNC Control, Pallet Size 400mm x 400mm, Max Spindle Speed 14,000rpm, Spindle Taper BT40, 60 Tool ATC, Spindle Oil Coolerant Pressure Unit, Consep Rear Swarf Conveyor. S/No. NH401120612 (2012) Machine Footprint: 4400 x 2400 x 2600mm Weight 9950kg. Country of Origin: Japan
Please Note: This lot is located in Dundee, Scotland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically ...
Lot 2: Mori Seiki SL-303BMC 1500 CNC Turning Centre
Mori Seiki SL-303BMC 1500 CNC Turning Centre with Mori Seiki MSG-501 (mapps) CNC Control, 12 Tool Turret Tool Holder, Kitagawa B-212 300mm dia 3 Jaw Chuck, Powered Tailstock, Turbo Systems Swarf Conveyor, Spindle Speed Max 2500rpm, Incl. (4) x Live Tool Holders. S/No. SL300BA0980 (2002) Machine Size: 4500 x 1900 x 2200mm Weight: 8700kg. Country of Origin: Japan
Please Note: This lot is located in Dundee, Scotland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically ...
Lot 3: Mori Seiki SL-45B CNC Lathe
Mori Seiki SL-45B CNC Lathe with Mori Fanuc 15TF CNC Control, 12 Tool Turret, 530mm dia 3 Jaw Chuck, Powered tailstock. S/No. 143 (1990) Machine Size: 4400 x 2200 x 2500mm. Country of Origin: Japan
Please Note: This lot is located in Dundee, Scotland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement ...
Lot 4: Agie Charmilles Cut 30P WEDM Wire Eroder
Agie Charmilles Cut 30P WEDM Wire Eroder with Agie Charmilles Control, Inside Table Cut Area 620 x 420mm, Inside Tank Area 1250 x 940mm, Chiller Unit, Rear Wire Bin, Pendant Set Up Control. S/No. 396-900-119-119-0010 (2011) Weight 4690kg (Note: Suspected Generator Board Fault) Country of Origin: China
Please Note: This lot is located in Dundee, Scotland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the ...
Lot 5: Charmilles Technologies Robofil 2020Si
Charmilles Technologies Robofil 2020Si with Pendant Set Up Control, WEDM Wire Eroder, 3R System Machine Table, 430mm on X Axis, 370mm on Y Axis, ICS Chiller Unit, Rear Wire Bin. S/No. 123559 (1997) Machine Footprint 3300 x 2400 x 2400mm, Weight 2200kg (Note: Software needs to be upgraded - Several Errors) Country of Origin: Switzerland
Please Note: This lot is located in Dundee, Scotland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice ...
Lot 7: Harrison Alpha 330 Plus NC Lathe
Harrison Alpha 330 Plus NC Lathe with Harrison GE Fanuc Control, Swing Bed 320mm Diameter, Distance between Centres 1050mm, Spindle Speeds to 3500rpm, 4 Position Quick Change Tool Post, Collet Chuck Spindle, Additional collets T B C. S/No. P20239 (1998). Country of Origin: United Kingdom
Please Note: This lot is located in Dundee, Scotland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...