3145 - Amada AP32510V Laser Punch/Press, Gildemeister Sprint 32 & CTX400 CNC Lathes, Toolroom Machinery, Ultrasonic Wash Systems, UV Printers and more surplus to the ongoing requirements of a retained client
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Please Note: These lots are located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 1-10 z 34
Przedmiot 1: Amada AP32510V Laser Punch Press Apelio III
Amada AP32510V Laser Punch Press Apelio III with Fanuc Control, AF2000C Laser (27,300 hours), Donaldson Dust Collector, LKI MP250M Sheet Load Unloader. S/No. 32510040 (1999) 5" Lens. (2005)
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...
Przedmiot 2: Gildemeister Sprint 32 Linear Lathe
Gildemeister Sprint 32 Linear Lathe with GE Fanuc Series 160ib Control, IEMCA, Boss 545 32L Barfeed, Collet Chuck, Twin Head, 8000rpm Max., Parts Catcher. S/No. 2301-0142
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement ...
Przedmiot 3: Gildemeister CTX 400 Series 2 Lathe
Gildemeister CTX 400 Series 2 Lathe with Heidenhain CNC Pilot Control, Hydrafeed (Multifeed) Barfeed, 12 Station ATC, 5" Collet Chuck, Swarf Cponveyor. S/No. 01160002901
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement ...
Przedmiot 4: Colchester Triumph 2500 Lathe
Colchester Triumph 2500 Lathe with Anilam Mini Wizard Dro, Spindle Speed 0 - 2500rpm, 10" 3 Jaw Chuck, 1.3m between Centres. S/No. LVT50G1R JA/01
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Przedmiot 5: Colchester Bantam Lathe
Colchester Bantam Lathe, 5" 3 Jaw Chuck, Distance between Centres, 508mm Spindle Speed 36 - 1600rpm, 3 Point Steady. S/No. 227127
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Przedmiot 6: Bridgeport Turret Mill
Bridgeport Turret Mill, Table Size 36" x 9" with Anilam Wizard 211 Dro, Powerfeed, Spindle Speeds 67 - 4600. S/No. 2109603755
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are ...
Przedmiot 7: King Rich KRV2000 Turret Mill
King Rich KRV2000 Turret Mill with Mitutoyo Dro, Spindle Speeds 60 - 4200rpm, 6" Machine Vice. S/No. 6493
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...
Przedmiot 7A: XYZ SM 3000 Milling Machine
XYZ SM 3000 Milling Machine with Proto Trak SM Control. S/No. 10082 (2004)
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Przedmiot 8: Burgmaster Multi Section Drill
Burgmaster Multi Section Drill, 5 Stations, Table Size 40" x 24". S/No. 5870
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Przedmiot 9: Carter Truecut CNC Guillotine Q411D 1250mm. S/No. 0807165 (2008)
Carter Truecut CNC Guillotine Q411D, Cutting Thickness 3.5mm, Cutting Width 1250mm. S/No. 0807165 (2008)
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...