3142 - (4) Radiator Valve Mfg & Assembly Machines previously used by Rettig Ireland

Engineering

L'enchère s'est terminée le

2022-09-22 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Auction Brochure

Please click here to view a Brochure for this Auction

Auction Brochure

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 23.00%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2022-09-26 17:00:00.0

'Date limite d''apurement'

2022-10-06 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-10 de 106

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
22 sept. 2022 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
23.00%

Lot 1: Buffoli Type 2D-TRB-10-CNC Trans-Bar Flex Transfer Machine

Buffoli Type 2D-TRB-10-CNC Trans-Bar Flex Transfer Machine. This machine is able to produce fittings from round brass bars. It consists of a horizontal axis indexing turret with 12 stations, each one equipped with one rotating clamping device (chuck). There is 10 working units in the machine frame, for drilling, threading, rolling, recessing and turning. S/N 476 (2006)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
22 sept. 2022 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
23.00%

Lot 2: Buffoli Type 3D-TR6-12 CNC Multi-Way Transfer Machine

Buffoli Type 3D-TR6-12 CNC Multi-Way Transfer Machine. This machine is able to produce fittings from brass forged parts. It consists of a horizontal axis indexing table with 10 stations, each one equipped with one rotating clamping device (chuck). there is 12 working spindles in the machine frame, for drilling, threading and recessing. S/N 475 (2006)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
22 sept. 2022 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
23.00%

Lot 3: Buffoli Type 4D-TG9-14+1 MPM CNC Multi-Way Transfer Machine

Buffoli Type 4D-TG9-14+1 MPM CNC Multi-Way Transfer Machine. This machine is able to produce fittings from forged brass parts. It consists of a vertical axis indexing turret with 9 stations, each one equiped with one rotating clamping device (chuck). There is 14 working units in the machine frame, for drilling, threading, rolling, recessing and turning. S/N 477 (2006)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
22 sept. 2022 15:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
23.00%

Lot 4: Buffoli Type 3D-TR8-11 Multi-Way Transfer Machine

Buffoli Type 3D-TR8-11 Multi-Way Transfer Machine, S/N 474 (2005)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
22 sept. 2022 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
23.00%

Lot 5: Hydromec Model HF-3150-CD Hot Brass Forging Press

Hydromec Model HF-3150-CD Hot Brass Forging Press, S/N 691 (2001) Nominal Capacity 3150kN, Slide Stroke 320mm, 22-40 Stroke Per Minute, Slide Adjustment 100mm, Bolster Dimensions 880 x 900mm, Cushion Capacity 500kN, Cushion Stroke 40-100mm, with Provit 5600 CNC Control, Maestri Type CT4-P 3500 4 Track LPG Furnace, S/N 1097.23 (2001) with Bucket Loading Elevator and 15 Stillages

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there areno loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of Lots 5 & 5A

Preview image
Fin:
22 sept. 2022 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
23.00%

Lot 5A: 20 Stillages Suitable for Hydromec (Lot No 5)

20 Stillages Suitable for Hydromec (Lot No 5).

810mm x 660mm x 620mm

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of Lots 5 & 5A

Fin:
22 sept. 2022 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
23.00%

Lot *: Combination of Lots 5 & 5A

Combination of Lots 5 & 5A

Lot 5 - Hydromec Model HF-3150-CD Hot Brass Forging Press, S/N 691 (2001) Nominal Capacity 3150kN, Slide Stroke 320mm, 22-40 Stroke Per Minute, Slide Adjustment 100mm, Bolster Dimensions 880 x 900mm, Cushion Capacity 500kN, Cushion Stroke 40-100mm, with Provit 5600 CNC Control, Maestri Type CT4-P 3500 4 Track LPG Furnace, S/N 1097.23 (2001) with Bucket Loading Elevator and 15 Stillages

Lot 5A - 20 Stillages Suitable for Hydromec (Lot No 5) - 810mm x 660mm x 620mm

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there areno loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically ...

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

N° de lot Description
Preview image
Fin:
22 sept. 2022 17:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
23.00%

Lot 6: Hydromec Turbo 200 Clipping Press

Hydromec Turbo 200 Clipping Press, Nominal Capacity 200 kN, Max Daylight 300mm, Slide Stroke 150mm, 1800-2200 Stroke Per Hour, 5 Mounted Dies, Dies Diameter 200mm with Accoustic Booth, Hopper/Vibratory Bowl Feed, Staubli Pick & Place Unit, Computer Controlled Inspection Camera, S/N 909 (2005)

Please Note: This lot is located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of Lots 6, 6A and 6B

Preview image
Fin:
22 sept. 2022 17:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
23.00%

Lot 6A: 17 Metal Stillages

17 Metal Stillages Approx. 770mm x 120mm x 800mm

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of Lots 6, 6A and 6B

Preview image
Fin:
22 sept. 2022 17:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
23.00%

Lot 6B: 17 Metal Stillages

17 Metal Stillages Approx. 770mm x 120mm x 800mm

Please Note: These lots are located in Limerick, Ireland. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of Lots 6, 6A and 6B

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories