3137 - Large Capacity CNC Boring Mills, CNC Lathes, VTL’s, Machine Tools, Fabrication & Inspection Equipment, Cranes, Vehicles and Much More following a change in business policy of a retained Client

Giddings and Lewis (G & L) RT-1250 Table Type Horizontal Boring and Milling machine, S/No. 180-0638 (2005) with Siemens 840 D Colour CNC Control System, Table Size 1600mm x 1250mm. X Axis Travel (Long Left/Right) 2500mm. Y Axis Travel ( Vertical) 2000mm. Z Axis Travel ( Boring Quill/Spindle) 1250mm. W Axis Travel ( Table In/Out from spindle) 1500mm. B axis Rotary Table ( Contouring 360,000 positions). Max Table Load 15,000 KG. Spindle Speeds to 3500 rpm ( 4 speed Gear Box). Main Motor 55 kw (70hp). 90 Station Auto Tool Changer, Through Spindle Coolant, Renishaw Probing, Contouring facing head attachment, Swarf Conveyor. Fully Enclosed machine House/guarding.

Please Note: This lot is located in Leeds, UK. Unfortunately, ...

Doosan Puma 700L Slant Bed CNC Lathe, Fanuc 21i-Model B Colour CNC Control with Manual Guide-I Conversational Programming, Swing Over Bed 1050mm, Swing Over Saddle 800mm, Max Turning Diameter 900mm, Max Turning Length 3200mm, 600mm Diameter 3 Jaw Hydraulic, Chuck, Fully Prog Tailstock, 12 Station Turret, 164mm Bar Cap, SMW-Autoblok 85mm to 350mm Hydraulic Steady, Swing Down Tool Pre-Setter, Spindle Speeds 3-1500rpm, 45kw Main Motor, Swarf Conveyor, Machine Weight 22 Tons. S/No. ML0158-001193, (9/2014)

Please Note: This lot is located in Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically ...

Mitsubishi MAF 210/150A Floor Boring and Milling Machine (1976) Siemens 820 CNC Control, Milling spindle diameter 210 mm
Boring spindle diameter 150 mm, X axis (horizontal) 8 000 mm, Y axis (vertical) 4 500 mm, Z axis (ram) 700 mm, W axis (spindle) 900 mm, Ram Section 510 x 750 mm, Spindle taper ISO 50, Spindle speeds 1 - 800 RPM, High speed spindle 16 - 1 340 RPM, Feed rates X / Y 5 - 5 000 mm/min, Z / W 2 - 3 150 mm/min, Rapids X / Y 5 m/min, Z / W 3,15 m/min, Spindle power 50 HP, Machine weight 56 500 kg

Please Note: This lot is located in Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically ...

Doosan Puma 400LB Slant Bed CNC Lathe, Fanuc 21i-TB Colour CNC Control, Swing Over Bed 700mm, Swing Over Saddle 590mm, Max Turning Length 2093mm, 380mm Diameter 3 Jaw Hydraulic, Chuck, Fully Prog Tailstock, 10 Station Turret, 117mm Bar Cap, SMW Autoblok 30mm to 245mm Hydraulic Steady, Swing Down Tool Pre-Setter, Spindle Speeds 3-1500rpm, 22kw Main Motor, Swarf Conveyor, Machine Weight 11 Tons. S/No. P35L3634, (4/2008)

Please Note: This lot is located in Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to ...

Butler Hi-Power Elgamill Bed Milling Machine with Heidenhain TNC 320 Control, Bed Size 6m x 1.8m Approx, Travel X= 5400mm, Y=2400mm, Z Width = 1000mm Approx. S/No.  74M874

Please Note: This lot is located in Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January ...

Kuraki KBT-11-WA Table Type CNC Horizontal Boring and Milling Machine. S/No. 4257 (2000) with Fanuc 16i-M Colour CNC Control, Table Size 1400mm x 1600mm, X Travel 2000mm, Y Travel 1500mm, Z Travel 1450mm, Z Travel (quill) 500mm, Full B Axis Rotary Table, 40 Station ATC, BT-50, Max Table load 6500kg, Machine weight 27 tons.

Please Note: This lot is located in Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare ...

Webster and Bennett 72” T Series CNC Elevating Rail Vertical Turning and Boring Machine (1986) with Fagor 8040-T Colour CNC Control. S/No. 7345-2, Table Size 72”. Swing 84”, Max Height Under Cross rail 72”, Minimum Height under cross rail 24”, Table speeds 7.5 to 200rpm ( 2 Speed Gear Box), 40hp Main Motor, Power clamping to Elevating Rail, Manual R Type 5 position Turret.

Please Note: This lot is located in Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT ...

Webster & Bennett 72” E-M series Vertical Turning and Boring Machine. S/No. 5969-4 (1969) Table speeds 5.2 to 117rpm, Feed 0.008” to 0.375” per rev, Table size 72” Max Turning Dia 84”, Max Height under elevating rail 72” (Tall Body machine), Turret Slide travel 50”, Hydraulic Clamping to Elevating Rail, 40 hp Main Motor.

Please Note: This lot is located in Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare ...

Daewoo Puma 250MB Slant Bed CNC Lathe with C Axis and Live Tooling, Fanuc 18T CNC Control, Swing Over Bed 570mm, Swing Over Saddle 370mm, Max Turning Length 650mm, 250mm Diameter 3 Jaw Hydraulic, Chuck, Fully Prog Tailstock, 12 Station VDI Turret (6 Live), 77mm Bar Cap, Spindle Speeds 35-3500rpm, 15kw Main Motor, Swarf Conveyor, Machine Weight 5 Tons. S/No. P25M 0148

Please Note: This lot is located in Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically ...

Giddings & Lewis 70a-Dp5-T Table Type Horizontal Borer with DRO, Air-Lift Table

Please Note: This lot is located in Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis