Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Source, Flux Recovery System, 1 x 1303 DC & 3 X 1003 DC Power Supply. (Please Note: Weld Heads, Fluxing Units and Pipes Missing Some Cards in Rectifiers). S/No. 00361004825 (2010). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Sources, Flux Recovery System. S/No. 00361004824 (2010). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 3 & 3A

Lot 3 - Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Source, Flux Recovery System, 1 x 1303 DC & 3 X 1003 DC Power Supply. (Please Note: Weld Heads, Fluxing Units and Pipes Missing Some Cards in Rectifiers). S/No. 00361004825 (2010). Country of Origin: France

and

Lot 3A - Air Liquide Beam WM40 Sub-Arc Plate Welding Plant with 3-Spool Feed Unit, Garrandale Hydraulic Roller Support, 25 x 3m capacity approx, 4 x Starmatic 1303 & 1003 AC/DC Welding Power Sources, Flux Recovery System. S/No. 00361004824 (2010). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Air Liquide CB-Matic XLF 76-43 Column & Boom Welding System with Siemens Simatic HMI Control, 2 x Starmatic 1003 Rectifiers, 1 x Starmatic 1303 Rectifier, Subarc 5 Unit, 3-Spool Wire Feed Unit, Flux Recovery System, Remote Operator Control. S/No.00361004866 (2010). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB CD-60 Drive Rollers & Idler Rollers, Capacity 30MT. S/No. 5219-0102 (2011). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 4 & 4A

Lot 4 - Air Liquide CB-Matic XLF 76-43 Column & Boom Welding System with Siemens Simatic HMI Control, 2 x Starmatic 1003 Rectifiers, 1 x Starmatic 1303 Rectifier, Subarc 5 Unit, 3-Spool Wire Feed Unit, Flux Recovery System, Remote Operator Control. S/No.00361004866 (2010). Country of Origin: France

and

Lot 4A - ESAB CD-60 Drive Rollers & Idler Rollers, Capacity 30MT. S/No. 5219-0102 (2011). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Air Liquide CB-Matic XLF 76-43 Column & Boom Welding System with Siemens Simatic HMI Control, 2 x Starmatic 1003 Rectifiers, 1 x Starmatic 1303 Rectifier, Subarc 5 unit, 3-Spool Wire Feed Unit, Flux Recovery System, Remote Operator Control. S/No. 00361004867 (2010). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB CD-60 Drive Rollers & Idler Rollers, Capacity 30MT. S/No. 5219- (2011). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 5 & 5A

Lot 5 - Air Liquide CB-Matic XLF 76-43 Column & Boom Welding System with Siemens Simatic HMI Control, 2 x Starmatic 1003 Rectifiers, 1 x Starmatic 1303 Rectifier, Subarc 5 unit, 3-Spool Wire Feed Unit, Flux Recovery System, Remote Operator Control. S/No. 00361004867 (2010). Country of Origin: France

and

Lot 5A - ESAB CD-60 Drive Rollers & Idler Rollers, Capacity 30MT. S/No. 5219- (2011). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB FIT-100-IB/50MT Fit-Up Truck. S/No. 5635-0402 (2013). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB FIR-500/500MT Fit-Up Roller, S/No. 5635-0501 (2013). Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB CI-300-IB/150MT Rotators, Idler Rolls. S/No. 5219-0701 (2011) Country of Origin: Singapore

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB FIR-500/500MT Fit-Up Roller, S/No. 5635-0502 (2013) Country of Origin: Singapore

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Weldec Bocker Type RNMA2500-8500 Gantry Type Welding Station with 3 x ESAB Aristo 1000 Welding Power Sources, Floor Heating Station. S/No. 00321-2 (2015) Country of Origin: Germany

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

2 x ESAB CD-30/15MT Powered Rotators with 2 x Idler Rolls. S/No. 4915-0306 (2009) Country of Origin: Singapore

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB FIR 150/150MT Fit-Up Rollers. S/No. 5219-0502 (2011) (No Idler) (Spares or repairs - we recommend inspection prior to bidding) Country of Origin: Singapore

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ESAB SD-200/100MT Powered Driven Rolls, Cap 100MT, Weight Approx. 6450kg. S/No. 5082-0703 (2010). Country of Origin: Singapore

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

KMU Type MFBS 5/200 Portable Belt Linisher. ountry of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

KMU Type MFBS 5/200 Portable Belt Linisher. Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Boss G4212GP/MK5A-1 Heavy Duty, Rough Terrain Fork Lift Truck Capacity 42,000kg, Max Lift Height 5m. S/No. 021623 (1993). Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Konecranes S.W.L. 70-Ton Lifting Beam. S/No. 3497A2 Approx. 8m Long. Country of Origin: Finland

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Durham Lifting 40TE 40-Ton S.W.L Lifting Beam. S/No. DL26372 (2020) Approx. 12m Long. Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Aalborg Maskinfabrik Type KRYDSAAG Lifting 4-Point Adjustable Lifter, 6000kg Lifting Capacity. S/No. 200938 (2016). Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Overhead Loading facilities are available for use by suitably qualified operator/personnel. Full Risk Assessments & Method Statement (RAMS) are mandatory requirements for the removal of machinery and should include copies of all operator licenses and insurances.All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Fork Truck Attachment, Can Lifting Frame. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Air Liquide Megatrac 6 Tandem Sub Arc Welding Cart with Subarc 3C and Subarc 5 Controller, Starmatic 1003 AC/DC Plus rectifier with Subarc 3 Controller, Starmatic 1003 AC/DC Plus Rectifier with Subarc 5 Controller. Tractor Ref: W000315718. S/No. 00361601895 (2016), Rectifier Ref: W000315677. S/No. 00361126839 (2013), S/No. 00361304185 (2013). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Air Liquide Sub Arc Plate Welding Tractor and Rectifier, SAF Starmatic 650 DC Rectifer Power Source. S/No. LK500001C, Air Liquide Subarc 3 Type 91095647 Interface. S/No. 00257LA366 (2006). SAF Wheeled Tractor Type 91053501G. S/No. 00278LA366 (2008). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jasic MIG450 (N361) Mig Welder with PO45 Inching System Wire Feeder, Weld Gun not included. Country of Origin: China

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lincoln Electric CV 420 Mig Welder with LF 33 Wire Feeder, Weld Gun not included. S/No. P1080404265. Country of Origin: Poland

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder, Mounted on Lifting Trolley. S/No. 15110198, Rectifier to Wire Feeder Cable, Weld Gun included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 15060387, Rectifier to Wire Feeder Cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 15100599, Rectifier to Wire Feeder Cable, No weld gun included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 15060667, Rectifier to Wire Feeder Cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 15110203, Rectifier to Wire Feeder Cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 12020503, Rectifier to Wire Feeder Cable, Weld Gun not included

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 15060658, Rectifier to Wire Feeder Cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 15060385, Rectifier to wire feeder cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 13110615, Rectifier to wire feeder cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 15110199, Rectifier to wire feeder cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 15100598, Rectifier to wire feeder cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 15060662 & 15060664, Rectifier to wire feeder cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley. S/No. 15100590 & 15060305, Rectifier to wire feeder cable, Weld Gun included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, tnot here are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x Migatronic Sigma MPS 501S² W Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on lifting trolley. S/No. 15060660 & 15060659, Rectifier to wire feeder cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(5) x Migatronic Sigma MPS 501 Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on Lifting Trolley, Rectifier to wire feeder cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(5) x Migatronic Sigma MPS 501 Mig Welder Rectifier with MWF 55 Yard Wire Feeder. Mounted on lifting trolley, Rectifier to wire feeder cable, Weld Gun not included. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(6) x Lincoln Electric CV420 Welding Rectifers, Various Cable Looms, (5) x LF33 Wire Feed Units. No welding guns. Spares or Repair Only. Country of Origin: Poland

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ecco Finishing Supplies Ltd 24900HP Portable Abrasive Media Blaster. S/No. 4804 (2019) Includes Blast Hose Pipe. Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ecco Finishing Supplies Ltd 24900HP Portable Abrasive Media Blaster. S/No. 4803 (2019) Includes Blast Hose Pipe. Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ecco Finishing Supplies Ltd 249000HP Portable Abrasive Media Blaster. S/No. 4801 (2019) Includes Blast Hose Pipe. Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

SIE Industrial 24900HP Portable Abrasive Media Blaster. S/No. 4802. Includes Blast Hose Pipe. Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x Migatronic Sigma MPS 501S² W Mig Welder Rectifier Mounted in Lifting Trolley. S/No. 15060388 & 15100597. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x Migatronic Sigma MPS 501S² W Mig Welder Rectifier Mounted in Lifting Trolley. S/No. 15060303 & 15060386. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x Migatronic Sigma MPS 501S² W Mig Welder Rectifier Mounted in Lifting Trolley. S/No. 15110201 & 15100594. Country of Origin: Denmark

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Miller Weblift Lifting Sling, Capacity 65 ton x 12.4m long. S/No. 362840 (2021). Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Miller Weblift Lifting Sling, Capacity 100 ton x 11.8m long. S/No. 362837 (2021). Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Miller Weblift Lifting Sling, Capacity 100 ton x 12.5 m long. S/No. 362838 (2021). Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Miller Weblift Lifting Sling, Capacity 65 ton x 11.8m long. S/No. 362839 (2021). Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x B & W Lifting Lifting Slings, 20 ton x 6.35m long. S/No. 3037623 & 3037624 (2019). Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x Miller Weblift Lifting Slings, 20 ton x 7m long. S/No. 082604 & 083605 (2020). Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

RS Industrial Services Lifting Sling, Capacity 40 ton x 5m long. S/No. 2268490 (2015). Country of Origin: United Kingdom

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lifting Sling, Capacity 40 ton x 5.5m long. S/No. 5263610004/E (2015). Country of Origin: France

Please Note: This lot is located in Middlesbrough, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.