3041 - Cincinnati, Mazak and Cortini Vertical Machining Centres, Doosan and Yang Lathes, Elliot Universal Mill
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 18
Los 1: Mazak VTC20C Vertical Machining Centre
Mazak VTC20C Vertical Machining Centre with Mazak M-Plus Control, Table Size: 2000 x 510mm, Axis Travels: X = 1,660m, Y = 510mm, Z = 510mm,, 24-Station ATC, CAT 40, 7000rpm, 11kw (1996). Country of Origin: Japan
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory ...
Los 2: Cincinnati Hawk TC150 CNC Lathe
Cincinnati Hawk TC150 CNC Lathe with Fanuc 21iT Control, Max Cutting dia 203mm, Max Turning Length 400mm, Bar Cap 52mm, 3-Jaw Chuck, VDI 30 12 Station Turret, no Tailstock. S/No. 7051 FOO KK512 (2000). Country of Origin: United Kingdom
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process ...
Los 3: Bonher & Kohle (BOKO), F3 Universal Bed Type Boring & Milling Machine
Bonher & Kohle (BOKO), F3 Universal Bed Type Boring & Milling Machine, DRO, Rotary Table 1,600 x 800mm, Table Load Capacity 2,500kgs, Travel X1,400, Y760, Z960, Spindle taper ISO 40, Spindle speed 45 to 2,250rpm. S/No. 585. Country of Origin: Germany
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. ...
Los 4: Yang CK5A CNC Lathe
Yang CK5A CNC Lathe with Fanuc 0T Control, 12" 3-Jaw Chuck, Tailstock, 12-Station Turret, Tool Holders. S/No. F67002 (1987). Country of Origin: Taiwan
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Los 5: Kitamura Mycentre Zero Twin Pallet Vertical Machining Centre
Kitamura Mycentre Zero Twin Pallet Vertical Machining Centre, Yasnac MX3 Control, Table size 305 x 460mm, Travels X-305, Y- 245, Z- 305mm, BT30 Taper, 16 Station ATC, 3.7kw Spindle Motor, Feedrate X and Y - 40m/mim, Z 36m/min, 8,000rpm. S/No.75121. Country of Origin: Japan
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK ...
Los 6: Cincinnati Sabre 500 Vertical Machining Centre (1996)
Cincinnati Sabre 500 Vertical Machining Centre with Heidenhain 360 Control, Table Size: 650 x 510mm, Axis Travels: X = 510mm, Y = 510mm, Z = 560mm, 21-Station ATC, 8,000rpm, 11kw, BT40 (1996). Country of Origin: United Kingdom
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now ...
Los 7: Iemca VIP70 Short Mag Barfeed
Iemca VIP70 Short Mag Barfeed, cap 5-70mm dia, Length of Bar 150-1615mm. S/No. 0200047005 (2000). Country of Origin: Italy
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...
Los 8: Cortini M300A CNC Vertical Machining Centre (1996)
Cortini M300A CNC Vertical Machining Centre with Fanuc Control, Table size 660 x 150mm, Toolsetter, Weight – 600kgs. (1996) Country of Origin: Italy
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are ...
Los 9: Cromar Swarf Conveyor
Cromar Swarf Conveyor, For Cast Iron (2015) Overall dimensions 3,700mm x 1,060mm x 1,700mm High, Drop to Floor 1,200mm, Tray Opening 2,600mm Long x 400mm wide. S/No. M450001A. Country of Origin: United Kingdom
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...
Los 10: Elliott Universal Mill
Elliott Universal Mill. Country of Origin: Germany
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.