3030 - Akira Seiki and Fagima Machining Centres, Takisawa, Daewoo, Comev Picodue and Poreba Lathes and Ancillary Factory Items
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These items are located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 51-60 de 191
Lot 63: Kitagawa BB208 210mm 3-Jaw Self-Centering Chuck
Kitagawa BB208 210mm 3-Jaw Self-Centering Chuck. Country of Origin: Japan
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 64: SMW Autoblok 210 BH 210mm 3-Jaw Self-Centering Chuck
SMW Autoblok 210 BH 210mm 3-Jaw Self-Centering Chuck. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 65: Serrmac TCS 40 Drill with Digit D.R.O
Serrmac TCS 40 Drill with Digital D.R.O, 3-Axis with Cross Table, Precision Modular Clamp, Type 4 Clamp Cone, Complete with Chip Collecting Tank and Set of Toolholders. S/No. 991787 (1999. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 65A: (2) x Precision Modular Vices
(2) x Precision Modular Vices. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *65 & 65A: Combination of lots 65 & 65A
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 65 | Serrmac TCS 40 Drill with Digit D.R.O |
| 65A | (2) x Precision Modular Vices |
Lot 66: Dividing Head, 200mm diameter
Dividing Head, 200mm diameter. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 67: Wicker Single Phase AC220 Sharpening Machine
Wicker Single Phase AC220 Sharpening Machine. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 68: Wicker Single Phase AC220 Sharpening Machine
Wicker Single Phase AC220 Sharpening Machine. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 69: (1) x 160mm Vice & (1) x 200mm Vice
(1) x 160mm Vice & (1) x 200mm Vice. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 70: Serrmac TCS 3-Axis Drill with Cross Table
Serrmac TCS 3-Axis Drill with Cross Table, Machine Vice, 3-Jaw Chuck & Coolant Tray. S/No. 70587 (2007). Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.