3001 - Exceptional Offering of Modern CNC Grinders, Multi-Axis CNC Machining Centres & Lathes, Wire Eroders and Inspection Equipment formerly used by Ceewrite Engineering Ltd used in the Production of Precision Aerospace & Motorsport Components
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
For a full 3D tour of all lots please click here
Auction Brochure
Please click here to view a Brochure for this Auction
Please Note: These lots are located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 59
Lot 303B: (8) x Grinding Wheel Arbors
(8) x Grinding Wheel Arbors suitable for S31 &S41, Internal Grinding Stones, Various Centres, 200mm Dia Manual 3 Jaw Chuck with Adaptor, Various Grinding Wheel Spacer Rings, Chuck Adaptors.
Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement ...
Lot 303D: 6 Arm Grinding Wheel Stand
6 Arm Grinding Wheel Stand
Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 303E: Assortment of Studer Revolving and Fixed Steadies
Assortment of Studer Revolving and Fixed Steadies
Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 316C: Qty of HSK 63A Tooling
Qty of HSK 63A Tooling
Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 321B: Nikken 4th Axis Unit Type CNC 202 BZA
Nikken 4th Axis Unit Type CNC 202 BZA
Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 346: Lang Makro-Grip 5-Axis Vice 77 -47085/2624
Lang Makro-Grip 5-Axis Vice 77, Jaw width: 77mm, Base Length: 102mm, Clamping Range: 0-85mm - 47085/2624 with 70Nm Jaws - 3436 on Lang Quick Point 52 Round Plate, diameter: 157 x 27mm without Mounting Bores - 45901
Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a ...
Lot 347: Lang Makro-Grip 5-Axis Vice 77 - 47085/3559
Lang Makro-Grip 5-Axis Vice 77, Jaw width: 77mm, Base Length: 102mm, Clamping Range: 0-85mm - 47085/3559 with 70Nm Jaws - 3689
Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an ...
Lot 348: Lang Makro-Grip 5-Axis Vice 77 - 47160/3512
Lang Makro-Grip 5-Axis Vice 77, Jaw width: 77mm, Base Length: 170mm, Clamping Range: 0-160mm - 47160/3512 with 70Nm Jaws - 2624
Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an ...
Lot 349: Lang Makro-Grip 5-Axis Vice 77 - 47160/3432
Lang Makro-Grip 5-Axis Vice 77, Jaw width: 77mm, Base Length: 170mm, Clamping Range: 0-160mm - 47160/3432 with 70Nm Jaws - 3559
Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an ...
Lot 350: Lang Makro-Grip 5-Axis Vice 125 - 47205/4434
Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/4434 with 100Nm Jaws - 4441
Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on ...