2998A - Inspection Equipment, Tooling, Ancillaries and Motor Vehicles formerly used by PTG Inca in the manufacture of Investment Casting
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
For a full 3D tour of all lots
please
click here
Auction Brochure
Please click here to view a Brochure for this Auction
Please Note: Lot 798 is located in Birmingham.
Please Note: These lots are located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 37
Los 726: T-Slotted Cube
T-Slotted Cube 300 x 250 x 230mm. Country of Origin: United Kingdom
Please Note: This lot is located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Los 727: (3) x Angle Plates
(3) x Angle Plates, (2) x 300 x 300mm, (1) x 230 x 300mm. Country of Origin: United Kingdom
Please Note: This lot is located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Los 728: (2) x Swivel Plates
(2) x Swivel Plates 255 x 200mm & 350 x 320mm. Country of Origin: United Kingdom
Please Note: This lot is located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Los 729: (2) x Swivel Plates
(2) x Swivel Plates 250 x 200 & 250 x 170mm. Country of Origin: United Kingdom
Please Note: This lot is located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Los 730: (2) x Swivel Plates
(2) x Swivel Plates 255 x 170mm & (1) 410 x 300 x 230 Angle Plate. Country of Origin: United Kingdom
Please Note: This lot is located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) ...
Los 731: Sinetool Engraving 10" x 5" Sine Table
Sinetool Engraving 10" x 5" Sine Table. S/No. GNN105144. Country of Origin: United Kingdom
Please Note: This lot is located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Los 732: Sine Table
Sine Table 360 x 250mm. Country of Origin: United Kingdom
Please Note: This lot is located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Los 733: Sinetool Engraving 10" x 5" Sine Table
Sinetool Engraving 10" x 5" Sine Table. S/No. CNM105. Country of Origin: United Kingdom
Please Note: This lot is located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Los 734: Sine Table
Sine Table 300 x 200. Country of Origin: United Kingdom
Please Note: This lot is located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Los 735: Sine Table
Sine Table 350mm x 250mm. Country of Origin: United Kingdom
Please Note: This lot is located in Worcester, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.