2996 - Doosan, Hitachi, Hardinge Lathes, Bridgeport & Dugard Machining Centres and other Toolroom Equipment
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Lichfield, UK. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-7 de 7
Lot 1: Doosan Lynx 2100 LSY CNC Lathe
Doosan Lynx 2100 LSY CNC Lathe with Doosan Fanuc I Series Control, Twin Spindle, Live Tooling, 12 Station Turret, Tooleye, Parts Catcher, 200mm 3 Jaw Chuck, 140mm 3 Jaw Chuck. S/No. ML0406-000225 (01/2019) with Hydrafeed Multifeed 65 Barfeed. S/No. L02-18A83 (01/2018), Swarf Conveyor, Swarf Bin. Country of Origin: Korea
Please Note: This lot is located in Lichfield, UK. Unfortunately there are no loading facilities onsite site, dimantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 1, 1A, 1B, 1C
Combination of lots
Lot 1 - Doosan Lynx 2100 LSY CNC Lathe with Doosan Fanuc I Series Control, Twin Spindle, Live Tooling, 12 Station Turret, Tooleye, Parts Catcher, 200mm 3 Jaw Chuck, 140mm 3 Jaw Chuck. S/No. ML0406-000225 (01/2019) with Hydrafeed Multifeed 65 Barfeed. S/No. L02-18A83 (01/2018), Swarf Conveyor, Swarf Bin. Country of Origin: Korea
Lot 1A - Live Tooling with Collets and Preciflex Tooling. Country of Origin: United Kingdom
Lot 1B - Tooling. Country of Origin: United Kingdom
Lot 1C - Hainbuch Spanntop Mini AXF1X65 Collet Chuck and Collet Tool. Country of Origin: Germany
Please Note: This lot is located in Lichfield, UK. Unfortunately there are no loading facilities onsite site, dimantling and loading will be ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 1 | Doosan Lynx 2100 LSY CNC Lathe |
| 1A | Live Tooling with Collets and Preciflex Tooling |
| 1B | Tooling |
| 1C | Hainbuch Spanntop Mini AXF1X65 Collet Chuck and Collet Tool |
Lot 4: Hitachi Seiki Hi Tec-Turn 20SII CNC Lathe
Hitachi Seiki Hi Tec-Turn 20SII CNC Lathe with Yasnac Control, 200mm 3 Jaw Chuck, Tooleye, Taistock, 12 Station Turret, Swarf Conveyor, Swarf Bin. S/No. HTS24016. Country of Origin: Japan
Please Note: This lot is located in Lichfield, UK. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 4 & 4A
Combination of lots 4 & 4A
Lot 4 - Hitachi Seiki Hi Tec-Turn 20SII CNC Lathe with Yasnac Control, 200mm 3 Jaw Chuck, Tooleye, Taistock, 12 Station Turret, Swarf Conveyor, Swarf Bin. S/No. HTS24016. Country of Origin: Japan
Lot 4A - Crawford Collet Chuck CDC54. Country of Origin: United Kingdom
Please Note: This lot is located in Lichfield, UK. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 4 | Hitachi Seiki Hi Tec-Turn 20SII CNC Lathe |
| 4A | Crawford Collet Chuck CDC54 |
Lot 5: Hardinge LC CNC Lathe
Hardinge LC CNC Lathe with GF Fanuc Series 21-T Control, 12 Station Turret, Tailstock, 16C Collet Chuck, 170mm 3 Jaw Chuck. S/No. C-859-T with Multi-feed Short Magazine CNC Barfeed. Country of Origin: USA
Please Note: This lot is located in Lichfield, UK. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory ...
Lot 6: Hardinge LC CNC Lathe
Hardinge LC CNC Lathe with GE Fanuc Series 21T Control, Collet Chuck, 12 Station Turret. S/No. C-712-T with Multifeed Short Magazine CNC Barfeed Model ML 1. S/No. 003638, VDI Tooling. Country of Origin: United Kingdom
Please Note: This lot is located in Lichfield, UK. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now ...
Lot 11: Colchester Triumph 2000 Lathe
Colchester Triumph 2000 Lathe with Mitutoyo Dro, Gap Bed, 250mm 3 Jaw Chuck, 300mm 4 Jaw Chuck, Distance between Centres 800mm with Quick Change Tooling S/No. 6/0002/09580. Country of Origin: United Kingdom
Please Note: This lot is located in Lichfield, UK. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory ...