2970 - Okamoto Grinder, Nakamura & Harrison Lathes, Matchmaker Milling Machine and other Toolroom Equipment surplus to requirements
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 17
Los 1: Matchmaker 610 Mini Mill (2007)
Matchmaker 610 Mini Mill (2007) with Fanuc Oi-Mate MC Control, Table to Spindle 150 - 630mm, Table Size 700 X 308mm, Traverses X=610 X Y=305 X Z=460mm, Rapid Feed Rates X Y Z: 20 X 20 X 18 M/Min, Spindle Power 7.5kw, Spindle Speed 8000rpm, Tool Change 16 Station ATC, BT40, Weight, 2,500kg, Dimensions 1,850 x 2,020 x 2,120mm High. S/No. 61000938
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 3: Harrison Alpha 400 Plus CNC/Manual Teach Lathe (1998)
Harrison Alpha 400 Plus CNC/Manual Teach Lathe (1998) with Fanuc Control, 195mm Centre Height, 1,250 Between Centres, 2,500RPM, 3 Jaw Chuck, QCTP And Holders. S/No. P30064
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 4: Nakamura TW10MM CNC Lathe (1998)
Nakamura TW10MM CNC Lathe (1998) with Fanuc 18Ti Control, 6 Axis, LNS Ecoload Short Mag Bar Feed, Twin 12 Station Turret, Full C Axis & Drive Tools, Toolsetting Eyes, Collet Chuck, 3-Jaw Chuck, Q Setters, Renishaw Probe, Parts Catcher, Swarf Conveyor, 52mm Bar Cap, Machine Foot Print 3,100 x 1,850mm, Bar Feeder 2,000 x 1,100mm. S/No. W105809
Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of ...
Los 5: Okamoto ACC-52EX CNC Surface Grinder (1999)
Okamoto ACC-52EX CNC Surface Grinder (1999), Electro Magnetic Chuck, 500 x 200mm, Table 750 x 200mm. S/No.72039
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 6: Iemca VIP70 Short Mag Bar Feed (2000)
Iemca VIP70 Short Mag Bar Feed (2000), Cap 5-70mm Dia, Length of Bar 150-1615mm. S/No. 0200047005
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 7: Topper BF1500 Short Magazine Bar Feed (2007)
Topper BF1500 Short Magazine Bar Feed (2007) Bar Diameter 5-65mm, Spindle Height 850-1250mm.
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 8: Bridgeport 500/16 Digital Vertical Machining Centre (2000)
Bridgeport 500/16 Digital Vertical Machining Centre (2000) with Heidenhain TNC410M Control, Table 840 x 360mm, Traverses 500 x 340 x 520mm, BT40, 10,000rpm, 16ATC, Linear Guideways on X & Y Axis, Blockways on Z-Axis. S/No. 722810
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 9: Abwood Double Ended Grinding & Lapping Machine (1979)
Abwood Double Ended Grinding & Lapping Machine (1979), 400 x 200mm Tilting Tables, (2) Diamond Wheels, 170mm dia wheels, forward / reverse, coolant.
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 10: Flott Type TB 6 High Speed Drill
Flott Type TB 6 High Speed Drill, Spindle Speeds 450 to 9,000rpm, 2-Speed, Table size 170 x 170mm, 3 Phase power Supply
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 11: Nikken E348 Elbo Controlli Tool Presetter
Nikken E348 Elbo Controlli Tool Presetter (2002) S/No. 1652, Measuring range X200mm (400mm dia), Z500mm, Travelling column system, Ground granite column and base, Micrometric axis movement with Electronic servo-assisted X/Z axes, with Rotating spindle on roller cages, ISO pots 50/40/30, Resolution X/Z 0.001mm
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.