2930 - DMG Mori Seiki, YCM Supermax Machining Centres and Okamoto Surface Grinder
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These Lots are located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-3 von 3
Los 300: DMG Mori Seiki NHX4000 Twin Pallet Horizontal Machining Centre (2012)
DMG Mori Seiki NHX4000 Twin Pallet Horizontal Machining Centre (2012) with Siemens 840D Slimline 3D CNC Control, Pallet Size: 400 x 400mm, X Traverse: 560mm, Y Traverse: 560mm, Z Traverse: 660mm, B Axis 360,000 Degrees, Spindle Speeds: 0 – 12,000rpm, Spindle Taper: SK40, Flood Coolant, Rigid Tapping, Swarf Conveyor, Swarf Management System, Spindle Motor 15/11kw, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 2700 x 4200 x 2750mm, Approximate Weight 7600kg. S/No.1220 000057-3 2813243
Please Note: Fixtures are not included
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser. All/Any tooling is being ...
Los 301: YCM Supermax V158B Machining Centre (2003)
YCM Supermax V158B Machining Centre (2003) with Heidenhain TNC 410 Control, Table Size: 1700mm x 860mm, 24-Station ATC, Spindle Speed: 6,000rpm, Travel X = 1500mm, Y = 860mm, Z = 720mm, Measurements; 4.5m Length, 3.2m High and 3.5m Width. S/No. 3010 96
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.
Los 302: Okamoto 52 EX CNC Surface Grinder
Okamoto 52 EX, Model ACC-52EX CNC Surface Grinder with Okamoto Precision Control, Electric Magnetic Chuck: 500mm x 200mm, Table Size: 750mm x 200mm. S/No. 72039 (1999)
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.