Battenfeld Gloucester 5-Layer PP & PE Cast Film Extrusion Line, S/No. A15488/EKK1718 (2000), 20µm - 360µm, Max Output 500kg/h, Die Width 2700mm, Finished Width 2300mm, 'A' Extruder 150mm dia, 30:1 LD Twin Helix, 6-Zone, with Maddox Mixing, Vollmar 5 Component Gravimetric Blender with Re-Trim Feed, 'B' Extruder 90mm dia, 30:1 LD Twin Helix with Madox Mixing, Vollmar 5 Component Gravimetric Blender, 'C' Extruder 70mm dia, 30:1 LD Twin Helix with Madox Mixing, Vollmar 5 Component Gravimetric Blender, Cloreren Epoch II Die & Feedblock, Dynisco Screen Changer, Extrol Cast Line Control System, Twin-Roll Cast/Cooling x 700mm dia Section, Thermofisher Beta Gauge Scanner with Krypton 85 Source, Softal Double Sided ...

* Combination of lots 1 & 1A

Lot 1 - Battenfeld Gloucester 5-Layer PP & PE Cast Film Extrusion Line, S/No. A15488/EKK1718 (2000)

Please Note: The clearance deadline for this is lot has been extended to 24th September 2020

Lot 1A - 4 x Stainless Steel Day Bins with Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4629 (2014)

Lot 1B - Spare & Unused Cloreren V-Block

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloenco 5-Layer PP & PE Cast Film Extrusion Line (1986 - 2010) 20µm - 600µm, Max Output 400kg/h, Die Width 2300mm, Finished Width 2000mm, 'A' Extruder 150mm dia, 30:1 LD Twin Helix, 6-Zone, with Hydreclaim 6 Component Continuous Blender with Re-Trim Feed, 'B' & 'C' Extruders 90mm dia, 30:1 LD Twin Helix with Madox Mixing, 5-Zone, Maguire 4 Component Gravimetric Batch Blenders, Cloreren Epoch Design Die & Feedblock with Temperature Controlled Deckles, 3 x Dynisco Screen Changers Installed 2018, Excelsior Cast Line Control System, Twin-Roll Cast/Cooling x 500mm dia Section, Thermofisher L400 Scanning Frame Installed 2017, Sherman Double Sided Corona Discharge Treater, Herbold Granulator, Wintech Indexing ...

* Combination of lots 2 & 2A

Lot 2 - Battenfeld Gloenco 5-Layer PP & PE Cast Film Extrusion Line (1986 - 2010)

Please Note: The clearance deadline for this is lot has been extended to 24th September 2020

Lot 2A - (4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Summit Moretto Portable Gravimetric Blender with MPI WSB-400 Series Scale, Morreto Fan

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Atlas CSE 620 Centre Surface Slitter/Rewinder. S/No. 95014 (1995) Nominal Speed 600m/min, Unwind Web Width Min 500mm/Max 2200mm, Max Reel Diameter 800mm, Upgraded Splice Table fitted with (2) Web Clamps (2015),) )2 x Edge Trim Rewind Arms, (2) x Bobbin Reel Trim Winders, Upgraded Fife CCS Edge/Line Guide with Powered Electric Actuator (2019), Continuous or Broken Edge Line without Oscillation, (2) x Spare Drum Rollers, Sheer/Slitting Bar

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

* Combinationof lots 6 & 6A

Lot 6 - Atlas CSE 620 Centre Surface Slitter/Rewinder. S/No. 95014 (1995) Nominal Speed 600m/min, Unwind Web Width Min 500mm/Max 2200mm, Max Reel Diameter 800mm, Upgraded Splice Table fitted with (2) Web Clamps (2015), (2) x Edge Trim Rewind Arms, 2 x Bobbin Reel Trim Winders, Upgraded Fife CCS Edge/Line Guide with Powered Electric Actuator (2019), Continuous or Broken Edge Line without Oscillation, (2) x Spare Drum Rollers, Sheer/Slitting Bar,

Lot 6A - Floor Mounted Overhead Gantry 350kg SWL with Bectel Horizontal/Vertical/Rotational Reel Loader, S/No. P19696 (2016)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling ...

Ro-An Freedom Series RSU-30 Pouch Machine. S/No. RSU-30-109 (2006) Parker CTC Plc Control, Speed (2) x 130 Bags/min, Max Reel Dia Unwind 1000mm, Max Web Width 1520mm, Bag Width Min 80mm/Max 320mm, Bag Length Min 200mm/Max 700mm, Inner Core Unwind Dia 76mm, Perforation, Slitting, Zipper, Machine Length 25.3m, Configuration: Flat Pouch (No Gusset) Folded/Sealed Bottom/Zip, Folded Gusset Pouch (K or Doy) with Pressure Valve/Zip, Wicketted Pouch with Zip/Folded Gusset, Euro Slot, Handle Punch, Tear Notch

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically ...

Ro-An Freedom Series R35-24 Pouch Machine. S/No. RSU-24-100 (2007) Parker CTC Plc Control, Speed (2) x 160 bags/min, Max Reel Dia Unwind 1000mm, Max Web Width 1520mm, Bag Width Min 80mm/Max 320mm, Bag Length Min 200mm/Max 550mm, Inner Core Unwind Dia 76 & 152mm, Perforation, Slitting, Zipper, Machine Length 16.5m, Configuration: Flat Pouch (No Gusset) Folded/Sealed Bottom/Zip, Side Gusseted Pouch, Pouch with Fin Seal, Euro Slot, Handle Punch, Tear Notch

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Elsner AFR-18 Film, Foil & Paper Rewinder. S/No. 52840-031 (2009) with Floor Mounted Gantry/Electric Chain Hoist

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.