2872 - Bridgeport, Doosan, Hitachi Seiki, XYZ, Mazak Machining Centres and Lathes, Spark Eroders, Drills and Ancilliary Items no longer required
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Birmingham, Tamworth, Wolverhampton & Oakham. Please see individual lots for loading information and charges.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 73
Lot 8: Mazak Super Quick Turn 18MS Mark 11 CNC Lathe
Mazak Super Quick Turn 18MS Mark 11 CNC Lathe with Mazatrol T plus Control, Twin Spindle, 250mm 3 Jaw Chuck, 170mm 3 Jaw Chuck, 12 Station Turret, Tooleye, Swarf Conveyor. S/No. 113275 (1995) with Tooling
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 8A: Tos SUS-63 x 6500mm Centre Lathe
Tos SUS-63 x 6500mm Centre Lathe with Anilam Wizard 211 DRO, Swing Over Bed 655mm, Swing Over Cross Slide 390mm, Spindle Speeds 9 – 1120rpm, Spindle Bore 82mm, Tailstock, 400mm 3-Jaw Chuck (Fitted), 670mm 4-Jaw Chuck, (2) x Fixed 3-Point Steadies, Max Workpiece Weight 6,000kgs x 9rpm, Machine Length (approx.) 8,760mm, Machine Weight (approx.), 8,200kgs. S/No. 0440626
Please Note: This lot is located in Tamworth. Unfortunately, there are no loading facilites available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 9: Devlieg 2B-36 Spiramatic Jigmil
Devlieg 2B-36 Spiramatic Jigmil, Table Size 910mm x 610mm with Heidenhain TNC 145 Control. S/No. 8-1795
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 9A: Rotary Air Table
Rotary Air Table 26" x 26"
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 9 & 9A
Combination of lots 9 & 9A
9 - Devlieg 2B-36 Spiramatic Jigmil, Table Size 910mm x 610mm with Heidenhain TNC 145 Control. S/No. 8-1795
9A - Rotary Air Table 26" x 26"
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 9 | Devlieg 2B-36 Spiramatic Jigmil |
| 9A | Rotary Air Table |
Lot 10: Agie Cut Challenge 3 Wire Eroder
Agie Cut Challenge 3 Wire Eroder with Chiller, Table size 850mm
x 550mm. S/No. 149 (2000)
Please Note: This lot is located in Birmingham. A
dismantling and loading onto suitable vehicle charge of £300 will
be automatically added to your invoice should you be successful in
purchasing this item, blocking and securing will be at the cost of
the purchaser. All/Any tooling is being offered as
specifically described.
Lot 11: Agie Elox Mondo 20 Spark Eroder
Agie Elox Mondo 20 Spark Eroder, Table Size 400mm x 300mm, Tank Size 600mm x 400mm x 300mm Depth. S/No. M20 THK-005241
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 12: Sodick AP3 Model FS-SAP3 Spark Eroder
Sodick AP3 Model FS-SAP3 Spark Eroder with Fine Sodick Mark X EDM Control, Table Size: 600mm x 300mm, Tank Size: 700mm x 500mm x 320mm depth, Homemade Plate: 400mm x 250mm, 3R System. S/No. SAP3 207 (1991)
Please Note: This Machine is not in working order, sold as is for spares and repairs
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 13: Eurospark EZE 2030 Manual ZNC EDM Machine
Eurospark EZE 2030 Manual ZNC EDM Machine with Eruospark EZE Control and Programmable Z Depth, 50 Amp Generator, Work Table Size 600mm × 300mm, Travel X, Y, Z 300mm x 200mm x 200mm, Ram Platen to Work Table 190 ~ 500mm, Max. Electrode Weight 75kg, Max. Workpiece Weight 900kg, Work Tank Size W × D × H 980mm × 550mm × 300mm (2003)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 14: Danobat CP 420AN Bandsaw
Danobat CP 420AN Bandsaw, 400mm Capacity. S/No 1108901233 (2008)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.