Please click here to view a Brochure for this Auction

Trumpf Model Trumatic L4030 3200w CNC Laser with Siemens 840 CNC Control, 4000mm x 2000mm Cutting Area with Auto Change Tables, TLF 3000 Laser, Surface Filter Vario Dust Extractor, Including Trumpf Loadmaster Sheet Loader. S/No 130372 (1999)

Resonator upgraded to a 3200w/LSM turbine with magnetic bearings in 2009

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Edwards Pearson PR10 250 Ton x 5100mm Over Bed CNC Press Brake, Admitting 4500mm Between Side Frames, 3000mm Long Heavy Duty Back Gauge with Cybelec DNC 800 8 Axis Control, (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing, Infra-Red Operator Guards, Hydraulic Top Tool Clamping, Side & Rear Safety Fences, Tooling Carousel. S/No 97P288 (1997)

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Abus 2 Ton Crane with Gantry, Abus 2 Ton Hoist,  Stahl 2 Ton Hoist, 7m length, 6m Width, 3.7 High Approx.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: This lot has an extended clearance date of 30th April 2020.

Combination of lots 2 & 2A

Lot 2 - Edwards Pearson PR10 250 Ton x 5100mm Over Bed CNC Press Brake, Admitting 4500mm Between Side Frames, 3000mm Long Heavy Duty Back Gauge with Cybelec DNC 800 8 Axis Control, (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing, Infra-Red Operator Guards, Hydraulic Top Tool Clamping, Side & Rear Safety Fences, Tooling Carousel. S/No 97P288 (1997)

Lot 2A - Abus 2 Ton Crane with Gantry, Abus 2 Ton Hoist, Stahl 2 Ton Hoist, 7m length, 6m Width, 3.7 High Approx

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bystronic PR 150 Ton x 4100mm Over Bed CNC Press Brake with Cybelec DNC 1200 6 Axis Control, (Y1, Y2, X, Z1, Z2, R) Auto Crowing, Laser Guards, Hydraulic Top Tool Clamping, Side and Rear safety Fences, Tooling Carousel. S/No 04430044 (2004)

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Edwards Pearson PR6 150 Ton x 4100mm Over Bed CNC Press Brake with Cybelec DNC 880 6 Axis Control, (Y1, Y2, X, Z1, Z2, R) Auto Crowing, Infra-Red Guards, Hydraulic Top Tool Clamping, Side & Rear Safety Fences, Tooling Carousel. S/No. 99P403P (1999)

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Edwards Pearson PR10 150 Ton x 4100mm Over Bed CNC Press Brake, Including Cybelec DNC 800 6 Axis Control, (Y1, Y2, X, Z1, Z2, R) Auto Crowing, Infra-Red Guards, Hydraulic Top Tool Clamping, Side & Rear Safety Fences, Tooling Carousel. S/No. 97P287 (1997) (Spares or Repairs)

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tooling Carousel

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

RAS Type 73.40 Flexibend 4000mm x 2.5mm Capacity High Speed CNC Folder with System 5000 CNC Control System, ‘J’ Shape Back Gauge with 4000mm Reach, Max Bending Angle 180 deg, Full Length Segmented Goats Foot Top Tooling, (2) x Sets of Segmented Bottom Tools (10mm and 25mm wide), Infra-Red Operator Guarding (2001)

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Edwards Pearson VR 4080mm x 10mm Capacity Hydraulic Variable Rake Guillotine with Cybelec DNC 10 Control, Auto Blade Gap Adjustment, Heavy Duty Rear Sheet Support System with Integrated Conveyor, (1) x 4000mm Squaring Arm, 3 x 2000mm Sheet Supports, Rear Infra-Red Safety Guarding. S/No. 970633 (1997)

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

LVD Strippit Global 20 Ton Capacity CNC Turret Punch with Fanuc 180i-PB Control, Punching Area: 1250mm x 2500mm or 1250mm x 5000mm, (with one full reposition) Axis Travel: 1275mm x 2525mm, 30-Station Thick Turret Configuration with (3) x 88.9mm Auto Index Stations, (3) x Programmable Sheet Clamps. S/No. 27904 (2001)

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

LVD Delta 1250 Long Beam 20 Ton Capacity CNC Turret Punch with LVD MNC 32000 Control, Punching Area: 1250 x 2500mm or 1250 x 5000mm (with one full reposition) Axis Travel:-1275 x 2525mm, 22 Station Thick Turret Configuration with (2) x 88.9mm Auto Index Stations, (3) x Programmable Sheet Clamps. S/No. 23216 (1998)

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Selection of Wilson Punch Tooling

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wilson Punch Beading Tool

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wilson Wheel Tool

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Wilson Tooling for Punch Press with 24 Draw Cabinet

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Wilson X Sharp Punch Tool Grinder, Maximum Tool Diameter 160mm, Maximum Tool Height 230mm, Complete with 160mm Diameter 3 Jaw Chuck & 125mm Diameter 4 Jaw Chuck. S/No. 17-05 (2006)

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Esprit Viper 3000 CNC Plasma Cutting Machine, 12m x 3m Table (Can be reduced in 2m long sections) Including Hypertherm HPR 260 Power Source, Esprit Edge Pro CNC Control Including PC & Software, Power Pierce Technology, Stand Alone Dust Extraction. S/No. ESP-3A-644 (2007)

Please Note: This lot has an extended clearance date of 30th April 2020.

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Roundo Model PS 135 Hydraulic Double Pinch Plate Bending Rolls, 1550mm long x 135mm Top Roll Diameter, Hydraulic Drop End, All 3 Rolls Driven, Emergency Trip Wires, Set of unused Spare Rolls

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Striebig Model Economy 11A Panel Wall Saw, 5600mm Wide x 1800mm High Sheet Capacity, 300mm Blade Diameter, 3Kw Motor, Saw Speed 4750rpm, Integrated Dust Extractor. S/No. 34230 (2003)

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Giganle Bevelling Machine. S/No. 1007 (2013)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.  All/Any tooling is being offered as specifically described.

Kemppi Fast Mig KMS 400 Mig Welder. S/No. 1810435

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Kemppi Fast Mig M520 Welder. S/No. 2611796

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Kemppi Fast Mig M520 Welder. S/No. 2611863

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Kemppi Fast Mig M520 Welder. S/No. 2611801

Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.