Precitech  Nanoform 250 Ultra Precision Diamond Turning Lathe with Precitech UPX CNC Control System, work Piece Balancing Software, Maximum Speed of Air Bearing Work Spindle 18000rpm, Fitted with 200mm Vacuum Chuck, Maximum Load on Spindle 27kg, Axis Travels X=220mm, Z=220mm, Maximum Feed Rate 4000mm/min Maximum Swing 250mm, Tool Platten Dimensions 600mm x 370mm, Granite Base Construction, Vibration Isolation System, Oil Hydrostatic Machine Slides, Spray Mist Lubrication System, Fume Extraction Unit, Vacuum Unit. S/No. 2009-023 (2011)

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Matsuura Cublex 42 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 20000rpm, HSK 63 Spindle Taper, Axis Travels X=520mm Y=730mm Z=510mm A=120 Degrees (-110/+10) C=360 Degrees, Rapid Feed Rates 50m/min, Maximum Table Speed for Turning 1800rpm, 120 Station ATC, Pallet Diameter 300mm, Maximum Component Size H=350mm D=420mm, 40 Bar Through Spindle Coolant, FSE Filtration System, Tool Presetter, Renishaw Probe Interface, Swarf Conveyor, Filtermist FX5000 Fume Extractor, Swarf Bin, (2) Spare Pallets (Fixtures Not Included). S/No. 18009 (3/2009)

Please Note: This Machine has had a new spindle end of 2016

Please Note: This Item is located in West Sussex 

Matsuura Cublex 25 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 15000rpm, HSK 63 Spindle Taper, Axis Travels X=550mm Y=410mm Z=450mm B=220 Degrees (-110/+110) C 360 Degrees, Maximum Table Speed for Turning 3000rpm, Rapid Feedrates 50m/Min 150 Station ATC, FSE Filtration System 40 Bar Through Spindle Coolant, Filtermist FX4000 Fume Extraction, Pallet Diameter 130mm, Maximum Component Size D=250mm H=250mm, Renishaw Probe Interface, Tool Presetter, Swarf Conveyor, Swarf Bin, Aproximately 12 Additional Pallets. S/No. 17777 (7/2008)

Please Note: New spindle 2 years ago

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Studer S36 External Universal CNC Grinder with Ge Fanuc 16t Control System, Maximum Permissible Wheel Speed 45m/S, Maximum Wheel Diameter 500mm, X Axis Travel 260mm, Z Axis Travel 650mm, Distance between Centres 1000mm, Centre Height 175mm, Maximum Turning Diameter 250mm with Coolant Filtration, Fume Extraction Unit. S/No. 020.0688.90.084 

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Jones & Shipman Dominator 624 CNC Surface Grinder with GE Fanuc Series 210i-M CNC Control, Wheel Speeds 1000-3200rpm, Grinding Wheel Maximum Diameter 250mm x25 x 76.2mm, Table 600mm x 200mm, Maximum Grinding Length 600mm, Maximum Grinding Width 200mm, Axis Travels X=650mm Y=440mm Z=200mm C=0.0001mm, Equipped with 4th Axis, Coolant Filtration System, Filter Mist. S/No. M20583 (Installed 2002)

Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Andmar BG Internal Grinder, Jones and Shipman 1074 Grinder Modified by Andmar to Toolmakers Specification. S/No. A1872

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Harrison Alpha 1350s 2 Axis CNC Lathe with Harrison Ge Fanuc Alpha 1000 Series Control System, Touch Screen, Maximum Spindle Speed 3250rpm, Axis Travels X=230mm, Z=500mm, Rapid Feed Rates X=3m/min Z=6m/min, Distance between Centres 760mm, fitted with 160mm Pratt 3 Jaw Chuck, Manual Tailstock, 4 Position Manual Tool Post. S/No. S9D107 (2004)

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Emco 342 CNC Lathe with Siemens Sinumerik Control System, Maximum Spindle Speed 6000rpm, Axis Travels X=300mm Z=300mm, 6” 3 Jaw Chuck, Tail Stock, 42mm Bar Capacity, 12 Station VDI Turret, Distance between Centers 300mm. 

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Chiron 220-88 M2000 High Speed Machining Centre with GE Fanuc Series 18i-M Control, 40 Station ATC, Table Size 2600mm x 550mm, Automatic Doors. S/No. 220-88 (2003)

Please Note: This lot is located in Birmingham and can be loaded free of charge to a suitable vehicle should the purchaser be able to supply front loaders, alternatively, loading of the machine will be at the cost of the purchaser. Blocking and securing will be at the cost of the purchaser.

Cincom Citizen L520 Sliding Head CNC Lathe with Boss 3R Barfeed, Lemca Control on Barfeed. S/No. E3945 (2004)

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Absolent Oil Mist Separator ODF 1000

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

LNS Chip Hopper Mobile Swarf Bin SWL 500kg, Capacity 0.35m³ 1.21m x 0.82m x 0.84m

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Gildermeister Twin 42 CNC Lathe, Twin Spindle, Collet Chucks, Twin 12 Station Turrets, Swarf Conveyor, S/No. 07300001601 with Boss S45YE Bar Feed, Lemca Control on Barfeed. S/No. 020413GA05 (2004)

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

DMG Gildemeister CTX420 Linear CNC Lathe with Heidenhain Din Plus Control, Y Axis, Turning diameter: 565mm, Turning length: 600mm, 210mm Chuck, SMW Collet Chuck, Toolsetter, 12-Station Turret, Tailstock, Swarf Conveyor & Bin, (7) pieces of Driven Tooling plus static,– Spindle Hours 21,198. S/No. 02260002411 (2003)

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Lapmaster LSP20 Dualface Lapping and Polishing Machine with Mitsubishi Control, Table Size 50mm with Tower and Tooling (2001)

Please Note: This lot is located in Birmingham Unfortunately there are no loading facilities for this machine.  Loading, Dismantling and Securing however will be at the cost of the purchaser.

Please click here to view a technical specification on this machine

Mazak AJV 32/604N Vertical Machining Centre fitted with Mazatrol M32 Control System, Axis Travels X=1500mm Y=700mm Z=460mm, Maximum Spindle Speed 4000rpm, ISO40 Spindle Taper, 40 Station ATC, Table dimensions 1740mm x 650mm, Distance between Columns 800mm, Maximum load on Table 1500kg. S/No. 106449 (1993)

Please Note: This Lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Mazak AJV 25/404 CNC Vertical Machining Centre with Mazatrol M32 Control System Maximum Spindle Speed 4000rpm, ISO 40 Spindle Taper, Axis Travels X=1000mm Y=508mm Z=460mm, 30 Station ATC, Table Dimensions 1240mm X 550mm, Maximum Weight on Table 800kg, Swarf Conveyor. S/No. 74200

Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Hyundai SPT-V30TD Twin Pallet Vertical Machining Centre with Yasnak MX-3 Control System, Maximum Spindle Speed 8000rpm, BT30 Spindle Taper, Axis Tavels X=500mm Y=300mm Z=300mm, Rapid Feed Rates 30M/Min, Pallet Dimensions 900mm x 600mm, 14 Station Tool Carousel. S/No. 73TDD836

Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Cincinnati Milacron Lancer 1250 Vertical CNC Machining Centre with Acramatic A2100 CNC Control, 30 Tool ATC, Bed size 1370mm x 680mm - Travels X axis 1250mm, Y axis 600mm, Z axis 900mm, Spindle Speed 8000rpm, Spindle Taper BT 50, Swarf Conveyor and Coolant System. S/No. 7041 A01 95 0108 (1995)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Dean Smith & Grace Type 17 Centre Lathe, distance between Centres 1800mm, Swing Over Bed 460mm diameter, Spindle Speeds 35-1400rpm, Spindle Bore 65mm diameter, 12’’ 3-Jaw Chuck, 16’’ 4-Jaw Chuck and 3-Point. S/No. 36065-3-66

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

XYZ Machine Tools Pro 1500 VS Proto Trak Turret Head Milling Machine with Proto Trak AGE 3 Control, Table size 1060mm x 230mm, Rear Mounted Slotting Head, R8 Spindle Taper, Vari Speed Spindle (Speeds 60-500rpm low, 500-4200rpm high).  S/No. 990426 (1999)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

LNS Type Quick Load Servo II Barfeed, Minimum Bar Diameter 6mm, Maximum Bar Diameter 120mm, Maximum Bar Length 1500mm. S/No. 153089 (2000)

Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

LNS Type Express-220 Barfeed, Minimum Bar Diameter 2mm, Maximum Bar Diameter 20mm, Maximum Bar Length 3500mm. S/No. 106279 (2005)

Please Note: This lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Ajax AJBM16 Precision Drill

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.