MFD Dortmund Heavy Duty Centre Lathe, 8ft 8” Swing, 25ft between Centres, 60 Ton Unsupported with Powerised Tailstock and Quill, S/No. 5193

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser

Poreba TCG200 x 12000 Lathe, 12m between centres, with Steady Supports and Milling Attachment for Main Saddle, S/No. 1173-072 (1980)

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser

Gurutzpe Super B.T Lathe, 6m between centres x 800 Swing over Saddle, Motorised Tailstock with Steady Supports, S/No.7-35

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Poreba TR135 B2 x 6000 Centre Lathe, 6m between centres with Motorised Tailstock/Steady Support, S/No. 7402-01-05007-06

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Monsanta 165-5 Heavy Duty Roll Turning Lathe, 6m between centres with Steady Supports, S/No. 3900

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle.  However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Universal Centre Lathe TUR 630M/3000, 3m between Centres with Steady Supports, S/No. 51161

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Pallet of Chucks

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Boxford Lathe

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

TOS Varnsdorf WHQ 13.8 CNC Horizontal Boring Milling Machine S/No. 1702 (1999) with Heidenhain 426 TNC Control, Table 1800 x 2200, Load 12 Tons, X axis 3500, Y axis 2500, W axis 1250, 60 Tool ATC, Chip Conveyor Astos Type CDT175 S/No. 3137, TOS HF 50A R/A Milling Head S/No, 02-04.TOS LD 650 Facing Head, ROS BP13/560 Spindle Support, TOS VP13/300 Spindle Support, Chip Conveyor Astos Type CDT175 S/No. 3137

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

PCM Toolset

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Union BFP 130/5 Floor Borer, Union R/A Head Type WH24, Floor Plates to Suit, (3) No. 3500 x 1750, (1) No. 3500 x 5500, DRO, S/No. 10723

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Union Tee Slotted Powered Rotary Table 12m x 1.8m Model T1 1800S/No. 963

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Union BFP 130/5 Floor Borer, Union R/A Head Type WH24, Floor Plates to Suit, (3) No. 3500 x 1750, (1) No. 3500 x 5500, DRO, S/No. 10723

and

Union Tee Slotted Powered Rotary Table 12m x 1.8m Model T1 1800S/No. 963

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Skoda TOS WD 130A Ram Floor Type Horizontal Boring Milling Machine, A axis 4.8m, Y axis 1120 + Ram 450, 20 Ton Collet Powered Rotary Table 2m x 2m, S/No. D6439 Type TDVMF, (1) Skoda TOS Powered Tailstock, S/No. 224, (3) Milling Heads to suit with additional Head Attachment, S/No. 22120224

Please Note: The T slotted floor plates shown in the photgraphs of this lot are not included.

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Stankoimport Horizontal Boring Machine, Table Dimensions 1600 x 1800mm Model No. 2N636 GF1, Max Work Piece 8 Tons, Spindle 125 dia, I.S.O 50, DRO, S/No. 430

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle.  However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Slotted Fabrication Table 120” x 62”

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle.However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Giewont Model 4 Milling Machine fitted with Right Angle Head Type FWA41M, S/No. 97-34

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Stankoimport Milling Machine Type 6P11, S/No. 452

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

CSEPEL Radial Arm Drill Type RFH100/3000, Auto with Box Table, S/No. 76028 

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Fred K Town Radial Drill with Table, Machine No. 8343

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Arboga EM 825 geared head pillar drill with compound drilling table.

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Peiping Precision Ltd Universal Drill and Tap Grinder, Model PP-8ON with 3" Capacity

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Excel Machine Tools 12” Power Saw, Type KP-320

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Industrial Combustion Lifting Hood Type Furnace (Gas) 12’ x 8’ x 8’ supplied new by Industrial Combustion in 1989

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.

Industrial Combustion Lifting Hood Type Furnace (Gas) 25’ x 9’ x 9’

Please Note: This Item is located in Gwent, Wales and will be loaded free of charge to a suitable vehicle. However, any decommissioning, disconnection, blocking and securing that may be required will be at the cost of the purchaser.