Giddings and Lewis Fraser Type G50T CNC Horizontal Borer with G&L 8000B Control, 5" 50 int Spindle with 36" travel, 14 - 3000rpm Spindle Speeds, 40 Hp Spindle Motor, 91"/2310mm vertical travel, 96 x 60 Table, 96"/2440mm cross travel, 78" /198 mm longt saddle travel, 22,500kg table load capacity Flood Coolant thru Spindle and Nozzle, S/No. 450-1139 (1991)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Giddings and Lewis Fraser Type G50TS CNC Horizontal Borer with G&L8000B Control, 5" 50 int Spindle with 36" travel, 14 - 3000rpm Spindle speeds, 40 Hp Spindle Motor, 91"/2310mm vertical travel, 96 x 60 table, 96"/2440mm cross travel, 22,500kg Table Load capacity, High Pressure coolant thru Spindle and Nozzle, Integrated Z/W Hardware, Software for CH Davis type CNC Facing Heads (not supplied), Vitaliser Units on main Table for Airlift Table (not supplied), S/No. 450-1155 (1992)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Giddings and Lewis Airlift Rotary Table - 48 x 36"

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Kearns Richards Type SH75 CNC Horizontal Borer with Heidenhain TNC135 Control, 75mm spindle, 500 Spindle travel 180 to 1120rpm, 1000mm vertical travel 1000 x 1000mm Table, 1250mm cross travel, 1000mm longt travel, 4 position Rotary Table (not working at present, requires repair) Screw Cutting and Facing Head, S/No.7372

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

OMBA CNC Ram Type Vertical Borer type RAM150 with Siemens Sinumerik 820 Control, 1250mm 4 Jaw Hydraulic Chuck, 16 Stn Auto Tool Changer, S/No. 229 (1992)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Stavely Kearns Wide Bed Table Type Horizontal Borer 60 x 96 Table on Four Shear Bed, built in 60 x 60 4 position Rotary Table, 50 int 5" spindle with Power Drawbolt, 36" Spindle Travel, 84" Cross Travel, 50" Vertical Travel, built in 30" Facing Head, Power Tailstock, Pendant Control Spindle speeds 7 to 500 rpm with Spindle Bearing Support, Vertical Head and Boring Attachment, 3 Axis DRO, Qty of Spares and Ball Screw, Qty of 40 International Tooling excluding Cabinet, External Yellow Guarding, Tipping Skip

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Schiess Froriep CNC Vertical Borer model 16DKE140NC/C with Siemens Sinumerik 802 Control (retrofit), 9/45kw Spindle Drive (DC) 1600mm dia, 4 Jaw Chuck, 4 Position Turret, Swarf Conveyor, Tipping Skip, S/No. 11210077

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Comau Morando Ram Type CNC Vertical Borer Type 17L with Siemens Sinumerik 820 Control, 1700mm dia, 4 Jaw Chuck, 12 Station Auto Tool Changer , 39 kw DC Spindle Motor, Work Bench and Vice, Cabinet, Qty of Accessories

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Dorries Scharman Ecocut 5 axis Horizontal Boring Machine, XYZ B (table) and U (facing head) axis with Siemens Sinumerik 820 Control, Interchangeable Facing Head with (2) Pockets and Vertical Head and 3rd Head, X, Y, Z, B, Y-Facing, Boring Snout, (4) 1450 x 1000mm Tables, (4) 20-ATC, approx 100 Tools, Burfener Paper Filtration (1993) 4 Pallets Loading System, Automatic Tool Station, Swarf Conveyor in floor, Tooling, Qty CAT 50 Tooling, External Guards and Light Guards, Work Bench, Storage Tooling Rack, Cupboard of Spares, Tipping Skip, S/No. 213260/282135 (1993) (Please Note: Gear Box problem – Stuck in 1st Gear)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Dorries Scharmann Solon Machining Centre with Siemens Sinumerik Control, upgraded Drives (2011), (4) FIBRO 1250mm dia NC Indexing Tables, 4-Jaw Chuck, Fixed Tools, Universal Huron Type Head, 6 x 24-ATC, (2) Right Angled Heads, Burener Maschinenfarrik Paper Clarifier, Originally Siemens 880 (11/1993) - retrofitted by Siemens in 2011 with Siemens Sinamic S120 Software, external Guarding, Qty CAT 50 Tooling, Tipping Skip, (2) Tooling Racks, S/No. 123610

Please Note: This Item is in need of repair - sold as is

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

KTM Kearney Trecker Marwin Horizontal Machining Centre, Model FM300 with Kongsberg CNC, 2 x 1000mm sq Pallets, 40 Station Auto Tool Changer, 45 Tooling in Carousel, Qty 45 Tooling, S/No. WP041601 (1980's)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Trimos Tool Setter Type 4011SO50 for BT 45 Tooling with 45 Pot, S/No. 1379

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Tsugami Integrated 5 Axis CNC Turning and Milling Machine Model TA3, with Fanuc 11T Control with Automated Pallet Loader and Auto Toolchanger, 5-Axis Turning/Milling Centre with (10) x Pallets/Chucks, 6”, 8”, 10”, Tooleye, X, Y, Z, C, B-Axis, Fanuc 11T, Swarf Conveyor, Tipping Skip, S/No. 3107 (1998) (No BT 40 Tooling)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Komatsu BTM06YS Horizontal & Vertical Machining Centre with Fanuc 11M 4 Axis control, 2 x 1000mm dia, 4 Jaw Pallet Chucks, 48 Stn Toolchanger thru Tool Coolant, Milling Spindle Head with Indexing to 2 positions Vertical and Horizontal, XYZ Travels 700 x 1100 x 700mm, BT 50 Spindle, Tooling Rack, S/No. 010113 (10/1998)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Nikken Toolsetter Model WASP, BT 50 Tooling, S/No. 0036 (2006)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Correa CF17D CNC Universal Bed Type Milling Machine with Heidenhain TNC 426 Control, Heidenhain HR410 Electronic Portable Handwheel, Table size 2000mm x 700mm, XYZ Travels X = 2000mm, Y = 800mm, Z = 800mm, Max Weight on Table 3500kgs, Spindle Speeds 20 – 3000rpm, Spindle Motor 17kw, Spindle Taper ISO 50, Total Power Requirement 24kw, Weight 9000kgs, Dimensions 5265 x 2900 x 2760mm. S/No. 968778 (2001 - supplied 05/2002)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser

Line GSP Plano Milling Machine 4010 x 1110mm Table (bed breaks into 3 sections), Vertical and Side Milling Heads, 19 to 630rpm on each Head, Acurite DRO, External Guarding, Cabinet

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

HURON SXD733 4-Axis CNC Universal Bed Type Milling Machine with Heidenhain TNC 415 control, D type automatic indexing milling head with auto tool clamping, Table size 2400 mm x 920 mm, (auxiliary tables and fixturing shown in photos not included with lot), XYZ Axis travels X = 2450 mm, Y = 730 mm, Z = 1030 mm, Spindle speeds to 2500 rpm, Spindle taper ISO 50, Max table weight capacity 5000 kg, S/No. 910752 (04/1992)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Traub 3 Axis CNC Lathe Type TND400 with Traub TX8F Control, 240mm Turning dia x 800mm Turning Length, C Axis and Tooling inc, approx 6 to 8 Live Tools, 10" 3 Jaw Chuck, 12 Stn Turret (6 Driven) with Tailstock, Swarf Conveyor, Qty of Live Tooling, Qty of Tooling, S/No. 575 (1993)

Please Note: Machine needs Parameters re-entering as it has been switched off for over 6 months.

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Homma CNC Twin Pallet Vertical Turret Lathe, Model TAC 6 with Fanuc 15T Control, 2 x 630mm 4 Jaw Chucks/Pallets, 12 Station Toolchanger, Renishaw Probe in, Work Bench, Cabinet, Bench and Vice, Qty of Tooling,

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Webster Bennet 36 DH Vertical Turret Lathe, 36" dia 4 Jaw Chuck, 5.6 to 125rpm, 5 Position Turret, Newall Dro, Chuck Size 36”, S/No. 2432-7

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Webster Bennett 54 EV Elevating Rail Ram Type CNC Vertical Turret Lathe rebuilt and retrofitted by Pennine Automation 1996 with Siemens Sinumerik 802 Control, Ram type 54" 4 Jaw Timken Bearing Table, 1370mm Swing, 175rpm, Tipping Skip, Cabinet, Work Bench and Clamps

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Dean Smith and Grace Center Lathe Type 13-1 SB, 12” Electric, S/No. 31613-1-58, (No Tailstock)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Studer S35 CNC Universal Cylindrical Grinder with Studer  2 axis CNC control (Studer S4000 software version 6.14), Swing down internal attachment,  Renishaw M15 measuring probe, coolant and filtration equipment, Centre height 175 mm, 350 mm swing x 1000 mm centres, Max grinding dia 300 mm, Max grinding length 540 mm, Max workpiece weight between centres 130 kgs, Grinding wheel 500 mm dia x 80 mm bore x 203 mm width, Spindle Speeds to 1500 rpm, Grinding wheel head swivels plus or minus 8.5 degrees. S/No. 20147 (1988)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

MGL Stefor Model RTB10/5 CN CNC Horizontal Spindle Surface Grinding Machine with Siemens Sinumerik 840D 3 axis control, GT Electronica VM 23 in built wheel balancing, auto wheel dressing, Losma Model DTE100 coolant/clarifier with Losma filtermist attachment, Worktable size 1000 x 500 mm, Fitted 1000 x 500 mm electo magnetic chuck + Losma Demag magnetizer model BMD100 (2012), Axis Travels X = 1000 mm, Y = 500 mm, Z = 380 mm, Max table weight 900 kg, Max grinding wheel speed 2000 rpm, Max grinding wheel size 400 dia  x 50 mm wide  x 127 mm bore, Weight 4000 kg. S/No. 03071005 (2007)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Jones and Shipman Type 1416 Surface Grinder with 24” x 12” Electromagnetic Chuck, Darenth Clarifier, Auto D/Feed. S/No. BO92299

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Invicta Hydetsco Plano Shaper with Grinding Head Type 8H 96” x 30” Table, Electomagnetic Chuck, 700 x 800, Newhall DRO, Mag Chuck Size 79cm x 69cm, External Guarding, S/No. 130436103

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Zoller Pre-setter V720 Pre Setter, including Work Bench, Tool Holder and Vice, S/No. V720D-00125 (1993)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Asquith Horizontal Drill Type 28088RV, 5 MT Spindle Auxilary Table, Box Table 42” x 66”, Floor Plate 31 to 830rpm, S/No. 2520306 (1962)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Clarke Metalworker Pedestal Drill Model CDP201B 12 speeds 180 to 2740rpm, Chuck capacity 12mm, Spindle Taper JT33, 250 x 250mm Table, Part/No. 6505530 (2004)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Clarke Metalworker Pedestal Drill Model CDP201B 12 speeds 180 to 2740rpm, Chuck capacity 12mm, Spindle Taper JT33, 320mm dia Table

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Friggi Vertical Band Saw, Prosan Frigg Model 2000.650.900, Exor T-Line, Type VAS, Swarf, Machine No. 2613VASH (1997)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Centauro 300 Cesab Electric Fork Lift Truck 8300 3 Ton with Side Shift, 3 Masts, Lift Height 4,355, min 1904kg – max 2100kg, (2006)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Clark Dual Fuel Fork Lift Truck, Type CMP50SL-0064-9585 KF, 5000kg capacity, 500mm x 3000mm, Side Shifter, Dual Fuel: LPG (2003)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Guyson Wash Tank Orbit 800, S/No. 909168 (1997)

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Colchester Triumph 2000 Gap Bed Lathe, 10” 3-Jaw Chuck, 4-Jaw Chuck, Steady, Newhall DP700 DRO, Multi Fix Quick Change Tooling, S/No. LTP50GMRJH/36985

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Colchester Mascot 2000 Lathe, 12” 3 Jaw Chuck, 4 Jaw Chuck Steady, Newhall DRO, Gap Bed, Multi Fix Quick Change Tooling, S/No. MC048251

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Colchester Mascot 1600 Lathe, 12” 3 Jaw Chuck, 4 Jaw Chuck Steady, Newhall B60 DRO, Multi Fix Quick Change Tooling, S/No. 7/0001/10845

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Hurco TM10 CNC Lathe Model TM10H with Max Control, 12” 3 Jaw Chuck, 12 Station Turret, Tooleye, Swarf Conveyor, S/No. T10H-01105128AAA

Please Note: This item is located in Newcastle-upon-Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser