HAAS VF-3 Machining Centre with HAAS Control, Table Size 4 ft x 18”, 20-Station ATC, BT 40 Tooling with Tooling, S/No. 4093 (1994)

Please Note: This Item is located at Chesterfield and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.

HAAS 4th Axis Unit, 12” Chuck Size

Please Note: This Item is Located at Chesterfield and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.

Tower Unit with Kurt Vices

Please Note: This Item is located in Chesterfield and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.

HAAS VF -3 Machining Centre with HAAS Control, Table Size 4 ft x 18”, 20-Station ATC, BT 40 Tooling with Tooling, S/No. 4093 (1994) And HAAS 4th Axis Unit, 12” Chuck Size, Tower Unit with Kurt Vices

Please Note: These Items are located in Chesterfield and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.

Ajax Victor VTurn 20 CNC Lathe with Fanuc Series O-T Control, 8” Chuck, 10 Station Turret, Tooleye, Tailstock, Swarf Conveyor with Multisam 6.80 Barfeed, S/No. MA2143 (1995)

Please note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.

Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight

Ajax Victor VTurn 26 CNC Lathe with Fanuc Series O-T Control, 10 Station Turret, 10” Chuck, Tailstock with Swarf Conveyor, S/No. UC1738

 Please note:  This item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.

Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight

Ajax Victor TNS-5 CNC Lathe with Fanuc Series O-T Control, 12 Station Turret, 12” Chuck, Tailstock with Swarf Conveyor. S/No. FG - 1274 (1989)

Please Note: This Item is located at Chesterfield and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.

Harrison M500 Gap Bed Centre Lathe, 60” Between Centres with 4-Jaw Chuck and Fixed Steady.

Please note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.

Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight

Finnpower F5s 30 Ton Capacity CNC Turret Punch Press with Siemens Sinumerik Control, 22-Station Turret With 6 Auto Index Stations, Working Area 2500 X 1250 mm without repositioning, Max Hole Diameter 88.9 mm, Tooling in Turret. S/No. 11.0-F525145601 (2001)

Please Note: This Item is located in Haslingden, Lancashire and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.

Kingsland Ts3006  3050 x 6 mm Mild Steel Hydraulic Guillotine Shear, Power Back Gauge (Touch and Go System Needs Attention), Blade Gap Adjustment, 2 Front Supports LH Squaring Arm, Rear Photocell Safety Guards, Foot Pedal Control (2005)

Please Note: This Item is located in Halifax and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser

Edwards Pearson Model RTA/30T 30 Ton x 1500mm Over Bed Downstroke Hydraulic CNC Press Brake with Cybelec Euro 111, 3 Axis Control (X, Y1, Y2), Machine mounted operator guards, Side & Rear Fences, Foot Pedal Control, Limited Tooling and Top Clamps. S/No. 0121 (2001)

Please Note: This Item is located in Hyde, Unfortunately there are no loading facilities available on site. The lot would need skating and lifting out from current position

Amada Model CSW 220 200mm x 3.2mm Hydraulic Notching Machine

Please note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.

Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight

Denford Novaturn 2 Axis CNC Training Lathe, distance between centres 270 mm, Swing over bed 160 mm, Swing Over Cross Slide 80 mm, Travel (X Axis) 140 mm, Travel Z Axis 225 mm, Spindle Bore 21 mm, Quick Change Toolpost, 3 Jaw Chuck, Totally Enclosed High Vis’ Interlocked Guard, Spindle Motor 1.5hp, 220/24 Volts, Single Phase

Please Note: This Item is located in Knowsley. Items which are colleted by a pallet company will be charge at £60 per item for packing, palletising and labelling.

Denford Novamill 3 Axis CNC Vertical Milling Machine, Table Size 360 x 130 mm, Long' Travel (X) 225 mm, Cross Travel (Y) 150 mm, Head Travel (Z) 115 mm, Machineable area 225 x 115 mm, Spindle To Table 180 mm, Spindle to column 110 mm, Spindle Speeds 5000 RPM, Spindle Taper ISO30, 2 Tee Slots 10mm x 50 mm Centres, Machine Enclosed in Interlocked Safety Box (900 x 890 x 660 mm High), Separate Control Box, Motor Size 0.5hp, 220/240 Volts, Single Phase, 50hz, Weight 170kgs

Please Note: This Item is located in Knowsley. Items which are colleted by a pallet company will be charge at £60 per item for packing, palletising and labelling.

SIP 20KVA 415V A.C Spot Welder

Please note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.         

Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight

Bomar Model STG 230 GA 500 Automatic Horizontal Bandsaw, Capacities 230 mm rounds, 280 x 230 mm Rectangles with Mitre Cutting to 60 Degrees (1999)

Please Note: This Item is located in Halifax and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.         

Colchester Mastiff 120” Between Centres Gap Bed Centre Lathe with 3 & 4 Jaw Chucks,
Fixed and Moving Steadies, Catch Plate & Large Face Plate

Please Note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.         

Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight

Asquith OD1 72” Radial Drilling Machine with Box Table and Insta-brake

Please Note: This Item is located in Knowsley and will need a low-loader only due to height of machine.

2000mm x 1.5mm Weight Assisted Box Pan Folding Machine with Full Length Segmented Tooling

Please Note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.         

Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight