Mikron HSM700 HS Plus High Speed Machining Centre with Heidenhain Atek CNC Control, Table Clamping Surface: 900mm x 550mm, X = 700mm, Y = 550mm, Z = 450mm, 12-Station HSK 40 Toolchanger. S/No. 82.98.052 (1998)

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Chiron FZ18 Plus High Speed Plus CNC Machining Centre with Siemens Control, Swarf Conveyor. S/No. 189-45 (2002)

Please Note: This Item is located in Lancashire

Ferrari A17 Multi Axis CNC Machining Centre with CNC 520 Control, 30-Station ATC, Swarf Conveyor, Coolant Clarifier, Erowa Easy Hand ITS 148 Loading System. S/No. 98004

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Tooling Cabinet with Qty of DIN 40 Back End Tooling

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Ferrari A17 Multi Axis CNC Machining Centre with CNC 520 Control, 30-Station ATC, Swarf Conveyor, Coolant Clarifier, Erowa Easy Hand ITS 148 Loading System. S/No. 98004

And;   

Tooling Cabinet with Qty of DIN 40 Back End Tooling

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Mazak VTC-20B 3-Axis Vertical Machining Centre with Mazatrol M-Plus Control, Table Size: 1460 x 510mm, X = 1120mm, Y = 510mm, Z = 510mm, BT40 Spindle Taper, 40 – 10,000rpm, 24-Station Tool Carousel, Swarf Conveyor, Tool Presetter, Thru’ Tool Coolant, FSE Coolant Filtration. S/No. 136756 (1998)

Please Note:- This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Haas VFO Vertical Machining Centre with Haas Control, 26 '' x 14 '' Table Size, 20-Station ATC. S/No. 4795 (1995)

Please Note:- The Sub-Table shown in the photographs is not included with this lot

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Maho MH700C CNC Milling Machine with Grundig CNC Pilot Control, Universal Built In Circular Table, X = 700mm, Y vertical axis = 450mm, Z horizontal axis = 500mm. S/No. 76157 (1984)

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Mori Seiki SL25B CNC Lathe, Fanuc 10 T Control, 10-Station Turret, Tail Stock, 12’’ 3 Jaw Chuck and Tooling. S/No. 861

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Mori Seiki AL2A-TM CNC Lathe with Fanuc 10TE-F Control, Collet Chuck, Tooleye, 8-Station Turret, LNS Hydrobar Barfeed, Manual Swarf Conveyor, Swing over Carriage: 310mm, Max. ‘Z’ Axis Movement: 500mm, Spindle Bore: 43mm. S/No. 723 (1986)

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Hitachi Hitec-Turn 23R CNC Turning Centre with Seicos L-Multi CNC Control, LNS Quick Load Bar Feed, Swarf Conveyor, Collet Chuck, 10-Station Turret, Tool Eye, Parts Take off Conveyor and Tooling. S/No. HT20185E (1997)

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however will be at the cost and responsibility of the purchaser

Hitachi Seiki HiCell 30 4-Axis Turning Centre with Seicos LIII Control, Maximum Turning Diameter: 310mm, Maximum Turning Length: 600mm, Spindle Speed: 2500rpm, Y-Axis, C-Axis, 40-Station Toolchanger, Swarf Conveyor. S/No. CA-30011 (1994)

Please Note:- This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Nakamura Superturn 4 CNC Lathe with Fanuc 3TT Control, 12-Station Turret, Tailstock, 65mm through Draw Tube, Swing over Saddle: 480mm, Max. Turning Length: 540mm. S/No. 8298052 (1984)

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however will be at the cost and responsibility of the purchaser

Daewoo Puma 6 CNC Lathe with Fanuc 10T Control, 6” diameter 3-Jaw Chuck, Tailstock, 12-Station Turret. S/No. 310168

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Kia Turn 21 CNC Lathe with Fanuc Korea Series OT Control, 10-Station Turret, Tail Stock, Tool Eye, Collet Chuck, Parts Catcher, LNS ECO Load  Bar Feed, Swarf Conveyor and Tool Holders S/No. K1A-21228 (1995)

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Mazak Quick Turn 8 CNC Lathe with Mazatrol T32-2 Control, 3-Jaw & Collet Chucks, FMB Turbo S Magazine Barfeed. S/No. N93997U

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Herbert Churchill HC-2-10 CNC Lathe with Mark Century 2000 Control, 12-Station Turret, Swing Down Tailstock, Parts Catcher, LNS Hydrobar Single Tube Bar Feed, Filtermist Unit, Swarf Conveyor. S/No. 143 MAC 6016

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Nakamura TW-10mm Multi-Axis CNC Lathe with Fanuc Series 18i-T Control, Collet Nose to L.H. Spindle, 3-Jaw Chuck, 160mm Dia to R.H Spindle, (2) 12-Station Turrets, Swarf Conveyor.
S/No. W105810 (2000)

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Matsuura MC-1000 V Vertical Machining Centre with Fanuc 11M Control, 50 BT Spindle, 35-Station ATC, Renishaw Probing, Tsudakoma RNVC-301 R 4th Axis Unit with 320mm Dia Face Plate, Table Size 1400mm x 500mm, X = 1050mm, Y= 560mm, Z = 560mm S/No. 890407862 (1989)

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Kitamura Mycenter HX300 Horizontal Machining Centre with Fanuc Series 16im Control, Max Spindle Speed: 15,000 rpm S/No. 40652 (1999)

Please Note:- This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser