2212 - Equipment no longer required due to the Retirement of the Directors at Marlyn Engineering, Phase 2

Engineering

Auction ended on

2013-06-19 15:00:00.0

Time left

Auction finished

Auction description

Please Note:- These Items are located in Birmingham, Cheshire and Dorset

Buyer's premium

Buyer's Premium will be charged at 15.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2013-06-21 17:00:00.0

Final clearance date

2013-07-04 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 85

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
19 Jun 2013 15:40:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 1: Haas VF-3 DHE Vertical Machining Centre

Haas VF-3 DHE Vertical Machining Centre, Table Size 48" x 18" (1219 x 457 mm) X Axis = 40" (1016 mm), Y Axis = 20" (508 mm), Z Axis = 25" (635 mm), Spindle Taper BT40, Max Spindle Speed: 10,000 RPM, Max Motor Rating 20 HP. 20-Tool Auto Changer (2004)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
19 Jun 2013 15:50:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 2: Union BFT 90/4 CNC Horizontal Boring Machine

Union BFT 90/4 CNC Horizontal Boring Machine, Table size 1000 mm x 1000 mm, Spindle 90mm / 40 ISO with Control Techniques CNC System. (Retrofitted 1995)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
19 Jun 2013 15:30:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 3: Beaver VC45 Vertical Machining Centre

Beaver VC45 Vertical Machining Centre with Table Size 2400mm x 400, X Traverse = 2000mm, Y Traverse = 400mm, Z Traverse = 400mm, GE Fanuc OM Control, 16-Position Auto Tool Changer, Spindle BT40, Spindle Speeds 40-4000 rpm with Swarf Conveyor and Tooling

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
19 Jun 2013 15:50:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 3A: Victor Vturn-20 CNC Lathe

Victor Vturn-20 CNC Lathe with OT Fanuc Control, Bar capacity 52mm, Between Centres 635mm, Max Cutting Diameter 230mm, 10-Turret Positions, Motor power 7.5kW, Collet Chuck, Tail Stock, Swarf Conveyor,  3m Hydrofeed Bar Feed (1997)

Please Note:- The Swarf Bin and Tooling are not included with this lot

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
19 Jun 2013 15:40:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 4: Adira Type QHD 20030B1 Down Stroke Hydraulic Press Brake

Adira Type QHD 20030B1 Down Stroke Hydraulic Press Brake, Capacity 200 Ton x 3000 mm, ELGO 2 Axis Back Gauge & Light Guards. (1995)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
19 Jun 2013 16:00:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 5: Dean Smith & Grace Type 30 12ft BC Centre Lathe

Dean Smith & Grace Type 30 12ft BC Centre Lathe, Swing Over Bed: 32", Swing Over Cross Slide: 19" , Distance Between Centres: 144", Spindle Bore: 4 3/4", Spindle Speeds: 7.4 - 600 rpm, Rapid Power to Saddle, 30" Diameter 4 Jaw Chuck, 2-Axis Digital Read Out

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
19 Jun 2013 15:00:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 5A: Colchester Mascot 1600 Gap Bed Centre Lathe

Colchester Mascot 1600 Gap Bed Centre Lathe, Swing Over Bed 17". Swing In Gap 26". Distance Between Centres 100", Spindle Bore 3", Speeds 20 - 1600. Dual Dials, 3-Jaw Chuck with Quick Change Tool Post.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
19 Jun 2013 16:00:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 6: Union BFT 80/2 Horizontal Boring, Facing & Milling Machine

Union BFT 80/2 Horizontal Boring, Facing & Milling Machine, 80mm Spindle Dia, 500mm Facing Head, 1125m x 1000mm Table Size

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
19 Jun 2013 15:40:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 7: Herbert Type 28A Vertical Milling Machine

Herbert Type 28A Vertical Milling Machine 28" x 85" Table, 62" Long Travel. 28 1/2" Cross Traverse, 30 1/2 " Max Spindle Nose to Table, Throat 26 3/4", Spindle Nose Dia 5 1/16", Spindle Taper 50 ISO, 960 rpm 16 x Spindle Speeds 12 - 360 rpm, 1430 rpm 16 x Spindle Speeds 18 - 540 rpm.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
19 Jun 2013 16:00:00 BST
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 8: Hahn & Kolb 2-Wheel Double Sided Fine Grinding Machine

Hahn & Kolb 2-Wheel Double Sided Fine Grinding Machine with 30" Diameter Grinding Wheels

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories