Gildemeister Sprint 42 Linear Twin Spindle, 6 & 2 Axis Turning Centre with Fanuc Series 160i-B Control, Max. Turning Diameter: 42mm, Max. Turning Length: 120mm, C and Y Axis to left & right hand spindles, 6000rpm max. Spindle to both Spindles, (4) Driven Tool Positions to Left Hand Spindle, Driven Tool Facility to Right Hand Spindle, Parts Catcher, High Pressure Coolant, Swarf Conveyor & Iemca Boss Magazine Barfeed. S/No. 2601-0148 (2005)

Location: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Gildemeister Sprint 32 Linear Twin Spindle, 6 & 2 Axis Turning Centre with Fanuc Series 160i-B Control, Max. Turning Diameter: 33mm, Max. Turning Length: 120mm, C and Y Axis to left & right hand spindles, 8,000rpm max. Spindle Speed to both Spindles, (3) Driven Tool Positions to left hand Spindle, Driven Tool Facility to Right Hand Spindle, Parts Catcher, High Pressure Coolant, Swarf Conveyor & Iemca Boss Magazine Barfeed. S/No. 2301-0146 (2003)

Location: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Traub TNM 28 Multi Slide CNC Automatic Lathe with TX8H Control, 4-Head Mounted Slides, 8-Station Turret with Driven Tool Facility, Back End Working Pick Up Unit, Swarf Conveyor, ACS Extractor, Magazine Barfeed, Max Bar Size: 28mm, Max. Turning Length (Turret): 200mm. S/No. 209 (1996)        

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Traub TNL 12/7 Sliding CNC Lathe with System TX8i Control, Twin Turrets to Main Spindle with Live Tooling Facility, Sub-spindle, LNS Trython SST5 Multi Tube Barfeed, ACS Filter Unit, Max. Bar Diameter: 12.7mm, Max. Turning Length (Fixed Guide Bush): 140mm with Rotating Guide Bush: 75mm. S/No. 110 (1998)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Mazak Multiplex 620 Twin Spindle 6-Axis Turning Centre with Mazatrol T32-6 Control, Max. Turning Diameter: 390mm, Standard Turning Diameter: 210mm, Max. Turning Length: 439mm, (2) ‘C’Axis (0.001 deg), 52mm Bar Capacity, (2) 12-Station Turrets with Driven Tools, Max. Spindle Speed: 4000rpm, Max. Driven Tool Speed: 3000rpm with Toolholders, Coolant System & Swarf Conveyor. S/No. 112028 (1994)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Victor V-Turn 26M ‘C’ Axis CNC Lathe with Fanuc OT Control, 250mm 3-Jaw Chuck, 12-Station Turret, Live Tooling Facility, Tooleye, Tailstock, Swarf Conveyor, Max. Turning Diameter: 380mm, Z-Axis Travel: 1090mm, 75mm through Draw Tube. S/No. UA-1415 (1995)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Victor V-Turn 26M 'C' Axis CNC Lathe with Fanuc OT Control, 250mm 3-Jaw Chuck, 12-Station Turret with Live Tooling Facility, Tooleye, Tailstock, Swarf Conveyor, Max. Turning Diameter: 380mm, Z-Axis Travel: 1090mm, 75mm through Draw Tube. S/No. UA1480 (1996)

Please Note: This Item is located in Leicestershire

Yang ML25A CNC Lathe with Fanuc OT Control, 250mm 3 Jaw Chud, 12-Station Turret, Tailstock, Swarf Conveyor. S/No. E10107 (1993)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Okuma & Howa Act 3, CNC Lathe with Fanuc ISTF Control, 250mm 3 Jaw Chuck, 12-Station ATC, Tool Eye, Tailstock, Swarf Conveyor

Please Note: This Item is located in Dudley, West Midlands.

Yam CK2 CNC Lathe with Fanuc IOT Control, 210mm 3 Jaw Chuck, 12-Station ATC, Tailstock, Swarf Conveyor. S/No. E67032 (1987)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Matsuura MC-800 VG2 Vertical Machining Centre with Yasnac Control, Nikken 4 ^th Axis, Table Size: 1150mm x 450mm, Travels: X = 800mm, Y = 510mm, Z = 500mm, Maximum Spindle Speed: 12,000rpm, BT40 Taper, 40-Position Toolchanger, Though Spindle Coolant. S/No. 20415090 (2002)

Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Beaver VC55 CNC Vertical Machining Centre with Heidenhain 355 Control, 26-Staion ATC, 40 ISO Spindle, Table Size: 1060 x 580mm with J&S 4th Axis Unit, 200mm diameter 3-Jaw Chuck. S/No. 6132 (1991)

Please Note: This Item is located in Lancashire

Kitamura Mycenter 3 Twin Pallet, 24-Station Vertical Machining Centre with Fanuc OM Control, Pallet Size: 820 x 410mm, Spindle Speeds: 10,000rpm, Auto Pallet Changer, Swarf Conveyor, Coolant. S/No. 11680 (1997)

Please Note: This Item is located in Lancashire

Hitachi Seiki VK55 Vertical Machining Centre with Seicos 10M Control, Table Size: 1400mm x 560mm, X = 900mm, Y = 560mm, Z = 560mm, Max. Spindle Speed: 8,000rpm, No.50 Taper, 120-Position Toolchanger, Through Spindle Coolant (Form B) (4th Axis Interface to suit Nikken CNC300 Rotary Table. S/No. 56327 (1999)

Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Nikken CNC300YA Rotary Table. S/No. 1141 (10/1998)

Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Hitachi Seiki VK55 Vertical Machining Centre with Seicos 10M Control, Table Size: 1400mm x 560mm, X = 900mm, Y = 560mm, Z = 560mm, Max. Spindle Speed: 8,000rpm, No.50 Taper, 120-Position Toolchanger, Through Spindle Coolant (Form B) (4th Axis Interface to suit Nikken CNC300 Rotary Table. S/No. 56327 (1999)

and;

Nikken CNC300YA Rotary Table. S/No. 1141 (10/1998)

Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Hitachi Seiki VK55 Vertical Machining Centre with Seicos 10M Control, Table Size: 1400mm x 560mm, Travels: X = 900mm Y = 560mm, Z = 560mm, Nikken 4th Axis, Maximum Spindle Speed: 8,000rpm, No. 50 Taper, 120-Position Toolchanger, Through Spindle Coolant. S/No. 56252 (1999)

Please Note: This Item is located in in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Hitachi Seiki HG630 II 8-Pallet Horizontal Machining Centre with Fanuc 15M Control, Paller Size: 630 x 630mm, Travels: X = 950mm, Y = 820mm, Z = 760mm, B-Axis, Maximum Spindle Speed: 4,500rpm, No. 50 Taper, 120-Position Toolchanger, Coolant. S/No. HG62060 (1998)

Please Note: This Item is located in in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Correa A.25/30 CNC Bed Type Milling Machine with Heidenhain TNC 155 Control, 3.5m x 900mm Table, X =3m, Y = 920 mm, Z = 900mm. 50 int Taper. S/No. 9250116 (1985)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser

Blanchard MOD No. 20D Rotary Surface Grinder with 36” diameter Magnetic Chuck, 18” diameter Solid Ring Grinding Wheel & Coolant. S/No. 11676

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser

Emag VSC 315 CNC Vertical Turning Machine with Siemens 805 Control, 300mm diameter 3-Jaw Powered Chuck, Sauter 12-Station Turret, Inclined Infeed Roller Track, Chain Driven Gripper System for Load/Unload to Chuck & Outfeed of Component, Mayfram Sward Conveyor with Air Filtration Unit. S/No. 0123-95621 (1995)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser

Emag VSC 315 CNC Vertical Turning Machine with Siemens 805 Control, 300mm diameter 3-Jaw Powered Chuck, Pick & Place Loading Unit, Chain Driven Gripper System for Load/Unload to Chuck & Outfeed to Inclined Roller Track, Mayfram Sward Conveyor with Air Filtration Unit. S/No. 0123-95622 (1995)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser

(2) Emag VSC 01/315 Vertical Turning Machines with Siemens Sinumeric Controls, 315mm Dia Chucks, 240mm throughfeed Conveyors, , Brankamp Tool Monitoring. S/No’s 0123-95621 & 0123-95622 (1995) with 2 Mayfran Swarf Conveyors. S/No’s P01.950.487.01 & P01.950.229.01 (1995) (2) IFS Coolant Filtration Systems. S/No’s 502972/1 & 502972/2 (1995) and (1) Component Transfer Arm and Range of Infeed and Outfeed Conveyors.

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however, will be at the cost of the purchaser