Edwards Pearson PR3, 100 Ton X 3100 mm, Over Bed Downstroke Hydraulic CNC Press Brake. Admit 2600 mm between frames. Cybelec EURO111 3 axis control (x,y1,y2). Machine mounted operator guards, side and rear fences. Selection of single vee tools and top punches. Foot pedal control.S/No.96/140/028 - 97F006 (1997)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Safan 80Ton x 3050mm Over Bed Downstroke Hydraulic Cnc Press Brake with Cybelec 3300PS - 3 axis control, machine mounted guards, side and rear fences. Full length die block and top tooling. Foot pedal (1980)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Adira GHA 100-30, 100 Ton x 3050 mm, Over bed upstroke hydraulic press brake. Admit 2550 mm between side frames. Simple manual sliding back gauge, GH machine mounted operator guards, side fences. Full length top 10/10 88 degree tooling, full length multi vee die block, treadle bar operation. Serial number 3508/6852 (1993)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Adira QH120-30 120Ton x 3050mm Over Bed Upstroke Hydraulic Press Brake, admit 2550mm b/frames . S/No.1932/3884 (1986)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Pearson Model 10012 - 100t x 12ft 3" Over Bed Downstroke Hydraulic Press Brake admit 10ft 2" b/frames. Motorised back gauge. SICK machine mounted guards. Quantity top/bottom tooling. S/No.6222/4 (1976)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Durma HAP3080, 80 Ton x 3050 mm, Over bed downstroke hydraulic press brake. Admit 2550 mm between side frames. ELGO 2 axis positional control (x,y). Full length multi vee die block 80mm square, full length gooseneck top tooling. Sick machine mounted operator guards, side and rear fences, foot pedal control. S/No. 7033981962 (1998)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Carter (Chinese) WG67Y - 40t x 1320mm Over Bed Downstroke Press Brake admit 950mm b/frames fitted with Estun programmable control for back gauge. Machine mounted guards, foot pedal, top and bottom tooling. Mach No.W2010-025 (2010)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

K & B Donewell 15-1300 , 15ton x 1300mm Over Bed Downstroke Hydraulic Press Brake, admit 1030mm b/frames. Manual front operated back gauge. Smartscan machine mounted operators guards, side and rear fences, multi vee die block and top tooling S/No.17905 1415 (1979)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Durma DHGM 4016, 4000 mm x 16 mm, Hydraulic swing beam guillotine shear. Power operated back gauge, with digital readout, blade gap adjustment, front supports, squaring arm, foot pedal control (1999)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Adira GHO 1330 - 3050 x 13mm Hydraulic Swing Beam Guillotine Shear, with power operated back gauge (metric readout) , manual blad gap adjustment, squaring arm & front supports

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Beyeler-Ajial 2000 mm x 13 mm, Hydraulic swing beam guillotine shear. Power operated back gauge, blade gap adjustment, front supports, squaring arm, foot pedal control. S/No 74915 (1975)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

GMS Model GMV3006 - 3000 x 6mm Hydraulic Variable Rake Guillotine Shear, power back gauge, manual blade gap adjustment

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Edwards DD 2540 mm x 3.5 mm, Direct Drive Mechanical Guillotine Shear, manual rack and pinion back gauge, front supports, squaring arm, foot pedal control. S/No. 78C/50423 (1978)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Keetona Shearmatic 3048 mm x 3.5 mm, Mechanical Under Driven Guillotine Shear, power operated back gauge, front supports, squaring arm, rear fence. S/No ASM208056 (1975)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Edwards Besco 6ft x 1/8" ( 1830mm c 3.2mm) Mechanical Guillotine Shear, Manual back gauge with readout, squaring guide, front supports, foot pedal (1972)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Ducci CL 0530 - 3000mm x 5mm Pyramid Plate Bending Rolls. Dia of top roll 200mm. Power adjustment top roll. Hydraulic counterbalance top roll, and operation of drop end. Serial No. CL0530-M-525.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Morgan Rushworth MPR 3000 mm x 4 mm, Pyramid plate bending rolls. Top roll 210 mm diameter. Manual adjustment to top roll, manual counter balance, drop end, emergency kick stops. S/No MPR/7NF/697 (1997)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Morgan MPR 2000 mm x 13 mm, Pyramid plate bending rolls. Top roll 254 mm diameter. Manual adjustment to top roll, manual counter balance, drop end, emergency kick stops, push button control

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Bigstone CF-600AW, 600 mm rounds Automatic Column Type Horizontal Bandsaw, Square capacity 600 x 600 mm. Variable blade speed drive, 9 x feeding counter, hydraulic blade tension, bundle clamping, with in – out roller track (1999)

Please Note: This Item is not in working order, sold as is

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Addison Bandmaster HBS320, 320 mm rounds Horizontal Bandsaw with Hydraulic Lift to Bow, Rectangles at 90 degrees 320 x 480 mm. With swivel vice and coolant. S/No 5298 (1997)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Startrite 30RF, 760 mm Throat Vertical Band Saw. Height under guides 250 mm, fixed table, two way tilt, 535 x 535 mm. Fitted with variable speed handle incorporating graduated scale. S/No. 87543

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Bianco MOD280M - 220mm rounds Horizontal Pull Down Mitre Cutting Bandsaw, Rect at 90 deg 260 x 140mm, cap at 45 deg - 160mm rounds, rect 160 x 140mm. Coolant. S/No.282909 (2006)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Jaespa 260 mm rounds Manual Horizontal Bandsaw, Swivel vice, hydraulic feed to bow, manual return. Coolant. S/No 723941

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Q & S B10 - 10" Horizontal Bandsawing Machine with swivel vice

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

IMET Sirio 300 Vertical Slide Type 2-Way Mitre Cutting Circular Cold Saw, 300mm Dia blade. Manual pull down, Cap @ 90 degrees, rounds 100 mm, squares 85 mm, rectangles 150 x 80 mm. At 45 degrees 100 mm rounds, 105 x 80 mm rectangles. With coolant (2001)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Fabris 315 mm diameter Blade Pull Down Circular Cold Saw, Capacities at 90 degrees, 100 mm rounds, 85 mm squares, 120 x 70 mm rectangles. At 45 degrees 90 mm rounds, 90 x 60 mm rectangles. 2 speed motor, outer support, coolant, pedestal mounted (2002)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Addison Perris 350, 350 mm diameter Blade Pull Down Circular Cold Saw, Capacities 106 mm hollow tube, 100 mm hollow section, 155 x 95 mm rectangles. Mitre cutting to 45 degrees 130 x 65 rectangles. Pneumatic clamping.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

ELU 315mm diameter Blades, Double Headed Aluminium Mitre Cutting Circular Saw, (1) Fied Head, (1) Moveable along Maximum 3m Bed, Pneumatic Feed to Heads, Pneumatic Clamping

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Startrite Harwi Model 2150G Wall Saw, Capacity 2100 x 5000 mm wide.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Hilmor (Anglia) MD3B, 76.2 mm OD Mild Steel, Mandrel Tube Bender, Wall thickness 3 mm, left and right hand bending. Maximum centre line radius with largest tube 381 mm, maximum bend angle 185 degrees. Manual grip operation, manual toggle on pressure slide, hydraulic mandrel retraction. Length over mandrel 1830 mm. One former only. S/No 7835.94 (1994)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Hilmor (Anglia) DB32, 32 mm OD Mild Steel Mandrel Tube Bender, Wall thickness 2 mm, right hand bending. Max C.L.R with largest tube 241 mm, max bend angle 190 deg. Eccentric pin grip operation, manual toggle on pressure slide, hydraulic mandrel retraction. Length over mandrel 1200 mm. One former only. S/No 0268.3.99 (1999)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Sahinler PK30F, 40 x 40 x 5mm Angles Section Bending Machine, Manual adj top roll, two rolls driven. Flats on flat 80 x 15mm, flats on edge 50 x 10mm, box sect 50 x 30 x 3mm, tubes 1.1/2" x 2.9mm.dia, Double foot pedal, horizontal/vertical working position. Additional rolls required for vangles/tubes. S/No. 191415 (2005)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Keetona 100” x 1/8” (2540 x 3 mm), Hydroform universal bending and folding machine. Pro rata capacity 1016 x 6 mm. Full length segmented tooling. S/No HUF818713 (1978)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Keetona 100" x 1/8" ( 2540 x 3mm) Hydroform Universal Folding Machine, 1016 x 6mm pro-rata cap.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Carter (Chinese) 3000 x 2mm Hand Operated Box & Pan Folding Machine, full length segmented tooling, counterbalance weights (2012)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Edwards Style 2480 x 2mm Hand Operated Box & Pan Folder

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

GEKA Model 110A/180 Hydraulic Universal Steelworker. Cap 152 x 152 x 13mm angles @ 90 deg, punch 40mm x 20mm / 28mm x 28mm, shear flats 600 x 15mm / 400mm x 20mm, Crop rounds and sqares 50mm, notch 90 x 52 x 13mm, electronic length stop. Double foot pedal

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland 115XS, 115 Ton, Hydraulic Universal Steelworker, Capacities 150 x 150 x 18 mm angles, punching 34 x 26 mm, 55 x 16 mm, flat shear 380 x 25 mm, 600 x 15 mm, 55 mm rounds/squares, notching 100 x 60 x 13 mm. Electronic length stop, double foot pedal operation. S/No 679894 (1994)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland 70XS, 70 Ton, Hydraulic Universal Steelworker, 150 x 150 x 13 mm angles at 90 degrees, punching 26 x 20 mm, 55 x 10 mm, flat shear 300 x 20 mm, 415 x 15 mm, 45 mm rounds/squares, notching 90 x 45 x 10 mm. Double pedal operation, length stop (1996)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland 70XS, 70 Ton, Hydraulic Universal Steelworker, 150 X 150 X 13 mm angles at 90 degrees, punching 26 x 20 mm, 55 x 10 mm, flat shear 300 x 20 mm, 375 x 15 mm, 45 mm rounds/squares, notching 90 x 45 x 10 mm. Double foot pedal control, manual length stop. S/No 191889 (1989)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland Multi 60 - 60ton Hydraulic Universal Steelworker. 130 x 130 x 13mm ms angles @ 90 deg , punching 29 x 15mm or 75mm x 8mm pro-rata, shear flats 230 x 20mm or 375 x 10mm pr0-rata, crop 45mm round/squares. Notch 90 x 45 x 10mm . Double foot pedal , length stop, S/no.377804 (2004)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Geka PP50T, 50 Ton, Hydraulic single ended punching machine, Capacity 27 x 13 mm, 40 x 9 mm,. Tee slotted table take sunit tooling with standard gooseneck punching adaptor, stripper and die block (2004)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Euromac Multi 220/6, 220 x 220 x 6 mm capacity (at 60 degrees), Hydraulic, Variable Angle Notching Machine, Cap at 30 degrees 3 mm. Angle variable from 30 – 140 deg. Auto blade gap adj. Table size 950 x 1020 mm. With rear rectangular cutting station for cutting slots 25 x 100/150 mm, up to 4 mm capacity. Foot pedal. S/No M84 30996 (1996)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Pierce All, 200 x 200 x 6 mm, Hydraulic fixed angle corner notching machine. Table guides, table area 1250 x 800 mm, foot pedal operation, lighting

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Norton Style 25-Ton approx Open Fronted Downstroke High Speed Hydraulic Press, Tee slotted bed area 610 x 457 mm, maximum daylight 362 mm, adjustable stroke maximum 153 mm, throat depth 229 mm. Tonnage control, auto/manual settings, guards.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Sweeney & Blocksidge No3 Flypress, 5” throat, 7” daylight, handle and weight.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Hand Arbor Press - 300mm feed rack on steel frame

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

RGA Model Imperial 500 - Type IMP500 Swivel Head Mitreing Abrasive Disc Cut-Off Machine, 508mm dia blade. Spindle speed 3000rpm. Peripheral speed 80mm/sec. Twin 7.5Kw motors. S/No 445 (1997)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kerry 3/4" (19mm) Belt Change Pillar Drill, Speeds 81 - 3000 rpm,tee slotted table 430 x 350mm, sensitive feed, chuck.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

PW Type 5284, 25 KVA Scissor Type Suspended Spot Welder with cooler, balance hoist, column, jib, control panel on column. S/No 7070.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

MG MCCR 2-Ton Variable Speed Conventional Welding Rotators, max roll centre 700mm. Rubber tyres, drive and idler unit, sepersate controlpanel, pendant control,. S/No.1426 (2008)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

MG MCCR 2-Ton Variable Speed Conventional Welding Rotators, max roll centre 700mm. Rubber tyres, drive and idler unit, sepersate controlpanel, pendant control,. S/No.1428 (2008)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Small Set Welding Rotators, one drive, one idler unit, foot pedal, variable speed drive unit

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Powerstorm Model 390 Air Cooled 9.6KW Diesel Generator, Speed 3600 rpm, 8KW rated at 3000 rpm, with 2 x 110volt sockets, 1 x 240 volt socket, frame mounted. S/No Lt6500CL

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Airmaster 15M, 2.2 KW Dust Extraction Unit, Bag type with manual shaker, separate spark arrester, starter panel. S/No. 89122310.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

DCE Unimaster - 0.55KW Dust Extraction Unit with Fulmatic FE controller, hose

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

SES Swing Table Shotblast Machine with 1.1 metre powered rotary table. Two impellor wheels. With shot elevator/recovery, power operated door, dust extraction unit, spare wheel motor (2005)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Piset 2S -J , 2" Pipe Threading Machine with tooling as available, on frame, 110/220 volts single phase. S/No.80010

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Production Machines Punch & Die Grinder, Manual swivel head, man height adj, with 120mm dia mag cuck, 130mm 3-jaw chuck. 3 phase. S/No.547

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

BM 150mm Wide Belt Grinder/Linishing Machine, Adjustable plane, pedestal mounted. S/No.9833093 (1998)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Almi AL100U Pipe Notching and Belt Grinding Machine, Grinding dia 20 - 76mm, 3Kw motor, one mandrel (2002)

Horizontal Linishing Machine, 100mm wide belt, bench mounted, 2hp mootor 3 phase

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Tube Deburring Machine on Frame - 1.1/2" Diameter Capacity, 3-Phase

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Hand Lever Shear on Table - 200mm blade length

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Dalton 10" diameter Blade Woodworking Sawbench, 3-Phase

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Comp Air Airlogic Hydrovane Rotary Air Compressor, Model 711, 60 c.f.m, working pressure 100 psi, 11Kw motor in accoustic enclosure.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

1060 x 1060 x 750mm Tee Slotted Box Table, 4 slots on topface, 3 slots each side

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Assorted Unit Punch Tools - 17 Off incl 13 off LVD, 4 Parsell, quantity assorted punches and dies

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Britannia 2000kgs Hydraulic Lift Table, 2500mm x 1250mm with Pendant Control

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser