Startrite 30RF, 760 mm Throat Vertical Band Saw. Height under guides 250 mm, fixed table, two way tilt, 535 x 535 mm. Fitted with variable speed handle incorporating graduated scale. S/No. 87543

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Bianco MOD280M - 220mm rounds Horizontal Pull Down Mitre Cutting Bandsaw, Rect at 90 deg 260 x 140mm, cap at 45 deg - 160mm rounds, rect 160 x 140mm. Coolant. S/No.282909 (2006)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Jaespa 260 mm rounds Manual Horizontal Bandsaw, Swivel vice, hydraulic feed to bow, manual return. Coolant. S/No 723941

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Q & S B10 - 10" Horizontal Bandsawing Machine with swivel vice

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

IMET Sirio 300 Vertical Slide Type 2-Way Mitre Cutting Circular Cold Saw, 300mm Dia blade. Manual pull down, Cap @ 90 degrees, rounds 100 mm, squares 85 mm, rectangles 150 x 80 mm. At 45 degrees 100 mm rounds, 105 x 80 mm rectangles. With coolant (2001)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Fabris 315 mm diameter Blade Pull Down Circular Cold Saw, Capacities at 90 degrees, 100 mm rounds, 85 mm squares, 120 x 70 mm rectangles. At 45 degrees 90 mm rounds, 90 x 60 mm rectangles. 2 speed motor, outer support, coolant, pedestal mounted (2002)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Addison Perris 350, 350 mm diameter Blade Pull Down Circular Cold Saw, Capacities 106 mm hollow tube, 100 mm hollow section, 155 x 95 mm rectangles. Mitre cutting to 45 degrees 130 x 65 rectangles. Pneumatic clamping.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

ELU 315mm diameter Blades, Double Headed Aluminium Mitre Cutting Circular Saw, (1) Fied Head, (1) Moveable along Maximum 3m Bed, Pneumatic Feed to Heads, Pneumatic Clamping

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Startrite Harwi Model 2150G Wall Saw, Capacity 2100 x 5000 mm wide.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Hilmor (Anglia) MD3B, 76.2 mm OD Mild Steel, Mandrel Tube Bender, Wall thickness 3 mm, left and right hand bending. Maximum centre line radius with largest tube 381 mm, maximum bend angle 185 degrees. Manual grip operation, manual toggle on pressure slide, hydraulic mandrel retraction. Length over mandrel 1830 mm. One former only. S/No 7835.94 (1994)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser