Unused Dener Puma 160-Ton x 3020 mm 4-Axis CNC Press Brake with ESA 550 Colour Screen Control 2D Graphics, 4-Axis (Y1,Y2,X,R). Admit between Side Frames: 2555mm, Throat Depth: 450mm, Open Height: 540mm with Power Operated Crowning Through Control, Euro type Upper Tool Clamping, Segmented Euro Type Upper Tool, Sedmented Euro type 4-Way Die Block, Bottom Die Holder, (2) Adjustable Front Support Arms, Machine mounted Operator Guards, Side Fences, Rear Protection Photocells with Emergency Stop on Foot Pedal Control

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £55,950   Reserve: £34,000

Unused Dener DMP Smart CNC 120-30, 120-TON x 3020mm Over Bed Downstroke Hydraulic Syncro CNC Press Brake, Admit 2555mm between Side Frames, Throat Depth: 450mm, Open Height: 540mm, Cybelec DNC60 3-Axis Control (X,Y1,Y2), (2) Pieces Back Gauge Fingers, Euro type Upper Tool Clamping, Segmented Euro type Top Tool, Euro type 4-Way Segmented Die Block, Bottom Die Holder, Aluminium Moveable Fron Support, Machine Mounted Operator Light Protection, Side Fences, Rear Protection Photocells, Foot Pedal with Emergency Stop

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £35,500   Reserve: £22,000

Unused Dener Model DMMH NC 3113, 3120mm x 13mm, Hydraulic Swing Beam Guillotine Shear with Maper NC BACK Gauge Control Unit with 100 PCS Program, 1000mm Flip Up Back Gauge, Manual Blade Gap Adjustment, Cutting Length Adjustment, Shadow Line Illumination, Hydraulic Hold Down System, Front Support Arms (2 x 1m), 1m Scaled Squaring Arm, Front Finger Protection, Rear Protection with Photocells, Foot Pedal Control

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £29,950   Reserve: £19,000

Unused Dener Model DMMH NC 3106, 3120mm x 6mm, Hydraulic Swing Beam Guillotine Shear with Maper NC Back Gauge Control Unit with 100 PCS Program, 1000mm Flip Up Back Gauge, Manual Blade Gap Adjustment, Cutting Length Adjustment, Shadow Line Illumination, Hydraulic Hold Down System, Front Support Arms, (2 x 1m), 1m Scaled Squaring Arm, Front Finger Protection, Rear Protection with Photocells, Foot Pedal Control

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £19,750   Reserve: £13,000

Unused Dener Model DMMH NC 3106, 3120mm x 6mm, Hydraulic Swing Beam Guillotine Shear with Maper NC Back Gauge Control Unit with 100 PCS Program, 1000mm Flip Up Back Gauge, Manual Blade Gap Adjustment, Cutting Length Adjustment, Shadow Line Illumination, Hydraulic Hold Down System, Front Support Arms, (2 x 1m), 1m Scaled Squaring Arm, Front Finger Protection, Rear Protection with Photocells, Foot Pedal Control

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Unused Biko B3 3128 3-Roll Hydraulic Pinch Pyramid Plate Bending Rolls, 3100 mm x 12 mm Pre-bend capacity (5 x top roll dia), Rolling only capacity 15 mm (5 x top roll dia), 9 mm pre-bend at 1.3 roll dia, Capacities based on material with a yield strength 260 n/sq mm. Top roll 285 mm dia, all rolls driven, hydraulic drop end. Induction hardened rolls, cone bending, dro, swing arm console, hydraulic balancing.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £36,800   Reserve: £24,000

Unused Sahinler RM 1270 mm x 2.5 mm Power Operated, Initital Pinch Plate Bending Rolls, Roll dia 90 mm. Prebend capacity 2 mm. Two rolls driven, manual pinch and manual adjustment to back bending roll, top roll to slip with Brake Motor, emergency trip wires. Separate foot pedal control for forward/reverse, emergency stop button

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £4,350   Reserve: £2,000

Unused Sahinler R1270 X 75, 1270 mm x 1.5 mm, Hand Operated Initial Pinch Bending Rolls, top roll to slip. Roll dia 75 mm.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £1,850   Reserve: £700

Unused Sahinler R1050 X 56, 1050 mm x 1 mm, Hand Operated Initial Pinch Bending Rolls, top roll to slip. Roll dia 56 mm.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £1,150   Reserve: £475

Unused Sahinler PK35F, 50 x 50 x 5 mm Angles Section Bending Machine, Manual adjustment to top roll, two rolls driven. Flats on flat 100 x 15 mm, flats on edge 60 x 10 mm, box section 70 x 30 x 2 mm, 50 x 40 x 3 mm, tubes 2” x 2.9. Double foot pedal control, horiz/vert working position. Additional rolls for angles/tubes required.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £3,950   Reserve: £1,700

Unused Sahinler PK35F, 50 x 50 x 5 mm Angles Section Bending Machine, Manual adjustment to top roll, two rolls driven. Flats on flat 100 x 15 mm, flats on edge 60 x 10 mm, box section 70 x 30 x 2 mm, 50 x 40 x 3 mm, tubes 2” x 2.9. Double foot pedal control, horiz/vert working position. Additional rolls for angles/tubes required.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £3,950   Reserve: £1,700

Unused Sahinler PK30F, 40 x 40 x 5 mm Angles Section Bending Machine, Manual adjustment to top roll, two rolls driven. Flats on flat 80 x 15 mm, flats on edge 50 x 10 mm, box section 50 x 30 x 3 mm, tubes 1 ½” x 2.9. Double foot pedal control, horiz/vert working position. Additional rolls for angles/tubes required.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £2,950   Reserve: £1,300

Unused Sahinler PK30F, 40 x 40 x 5 mm Angles Section Bending Machine, Manual adjustment to top roll, two rolls driven. Flats on flat 80 x 15 mm, flats on edge 50 x 10 mm, box section 50 x 30 x 3 mm, tubes 1 ½” x 2.9. Double foot pedal control, horiz/vert working position. Additional rolls for angles/tubes required.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £2,950   Reserve: £1,300

Unused Sahinler-Isitan PK30F Section Bending Machine, 40 x 40 x 5mm angles. Manual adjustment top roll, two rolls driven. Flats on flat 80 x 15mm, flats on edge 50 x 10mm, box section 50 x 30 x 3mm, tubes 1.1/2" x 2.9mm. Double foot pedal, horiz/vert working position. Additional rolls for angles/tubes required.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £2,950   Reserve: £1,300

Unused Bigstone CF-610DMS, 420mm Rounds, Semi Automatic Double Mitre Cutting Horizontal Bandsaw, Rectangles at 90 degrees 400 x 610 mm, rectangles at 45 degrees left 400 x 400 mm, at 60 degrees left 400 x 225 mm, at 45 degrees right 400 x 400mm with Hydraulic Vice, Hydraulic Blade Tension, Saw Blade, Tools, Mist Spray System

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £19,295   Reserve: £12,500

Unused Tomet Model 350 SA SXD, 270mm Rounds Semi Automatic Double Mitre Cutting Bandsaw, Rectangles at 90 degrees 350 x 220 mm. Capacities at 45 degrees left 240 mm rounds, 240 x 160 mm rectangles, right 210 mm rounds, 180 x 175 mm rectangles. Capacity at 60 degrees left 160 mm rounds, 150 x 150 mm square. Length stop/coolant.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £4,950   Reserve: £2,600

Unused Tomet Model 350 SXDH, 270 mm Rounds Manual Double Mitre Cutting Bandsaw, Rectangles at 90 degrees 350 x 220 mm. Capacities at 45 degrees left 240 mm rounds, 240 x 160 mm rectangles, right 210 mm rounds, 180 x 175 mm. Capacity at 60 degrees left 160 mm rounds, 150 x 150 mm square. Length stop/coolant.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £3,550   Reserve: £1,900

Unused Tomet Model 350 SXDH, 270mm Rounds Manual Double Mitre Cutting Bandsaw, Rectangles at 90 degrees 350 x 220 mm. Capacities at 45 degrees left 240 mm rounds, 240 x 160 mm rectangles, right 210 mm rounds, 180 x 175 mm

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Please Note: This item is still in it's original crate, the photographs shown are sample photographs of the same model machine.

New Price: £3,550   Reserve: £1,900

Unused Tomet Model 270 SXDH, 230mm Rounds Manual Double Mitre Cutting Bandsaw, Rectangles at 90 degrees 260 x 110 mm. Capacities at 45 degrees left 150 mm rounds, 200 x 125 mm rectangles, right 110 mm rounds, 160 x 110 mm rectangles. Capacities at 60 degrees left 90 mm rounds, 85 x 85 mm square. Length stop/coolant.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £2,950   Reserve: £1,500

Unused Tomet Model 270 SXDH, 230mm Rounds Manual Double Mitre Cutting Bandsaw, Rectangles at 90 degrees 260 x 110 mm. Capacities at 45 degrees left 150 mm rounds, 200 x 125 mm rectangles, right 110 mm rounds, 160 x 110 mm rectangles.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £2,950   Reserve: £1,500

Unused Tomet Model 270 Hydro, 230mm Rounds Manual Sindle Mitre Cutting Bandsaw, Rectangles at 90 degrees 260 x 110 mm. Capacities at 45 degrees left 150 mm rounds, 200 x 125 mm rectangles. Capacities at 60 degrees left 90 mm rounds, 85 x 85 mm square with Hydraulic Feed to Bow, Length Stop/ Coolant.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £2,550   Reserve: £1,200

Unused Tomet Model 270 HYDRO, 230mm Rounds Manual Single Mitre Cutting Bandsaw, Rectangles at 90 degrees 260 x 110 mm. Capacities at 45 degrees left 150 mm rounds, 200 x 125 mm rectangles. Capacities at 60 degrees left 90 mm rounds, 85 x 85 mm square

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Please Note: This item is still in it's original crate, the photographs shown are sample photographs of the same model machine.

New Price: £2,550   Reserve: £1,200

Unused Tomet Model 270 Hydro, 230mm Rounds Manual Single Mitre Cutting Bandsaw, Rectangles at 90 degrees 260 x 110 mm. Capacities at 45 degrees left 150 mm rounds, 200 x 125 mm rectangles. Capacities at 60 degrees left 90 mm rounds, 85 x 85 mm square with Hydraulic Feed to Bow, Length Stop/ Coolant.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Please Note: This item is still in it's original crate, the photographs shown are sample photographs of the same model machine.

New Price: £2,550   Reserve: £1,200

Unused Tomet Model 270 Hydro, 230mm Rounds Manual Single Mitre Cutting Bandsaw, Rectangles at 90 degrees 260 x 110 mm. Capacities at 45 degrees left 150 mm rounds, 200 x 125 mm rectangles. Capacities at 60 degrees left 90 mm rounds, 85 x 85 mm square with Hydraulic Feed to Bow, Length Stop/ Coolant.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Please Note: This item is still in it's original crate, the photographs shown are sample photographs of the same model machine.

New Price: £2,550   Reserve: £1,200

Unused Tomet Model 210 MANIS, 170mm Rounds Manual Pull Down, Sindle Mitre Cutting Bandsaw, Rectangles at 90 degrees 210 x 170 mm. Capacities at 45 degrees left 120 mm rounds, 110 mm squares. Capacities at 60 degrees left 70 mm rounds, 60 mm squares with Length Stop and Coolant, 220V Single Phase

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £1,650   Reserve: £750

Unused Tomet Model 210 MANIS, 170mm Rounds Manual Pull Down, Single Mitre Cutting Bandsaw, Rectangles at 90 degrees 210 x 170 mm. Capacities at 45 degrees left 120 mm rounds, 110 mm squares. Capacities at 60 degrees left 70 mm rounds, 60 mm squares

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Please Note: This item is still in it's original crate, the photographs shown are sample photographs of the same model machine.

New Price: £1,650   Reserve: £750

Unused Tomet Model 210 MANIS, 170mm Rounds Manual Pull Down, Sindle Mitre Cutting Bandsaw, Rectangles at 90 degrees 210 x 170 mm. Capacities at 45 degrees left 120 mm rounds, 110 mm squares. Capacities at 60 degrees left 70 mm rounds, 60 mm squares with Length Stop and Coolant, 220V Single Phase

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Please Note: This item is still in it's original crate, the photographs shown are sample photographs of the same model machine.

New Price: £1,650   Reserve: £750

Unused Sahinler HKM60, 60-Ton, Hydraulic Universal Steelworker, 120 x 120 x 12 mm angles at 90 degrees, punch 28 x 15 mm, 38 x 11 mm, flat shear 200 x 20 mm, 300 x 15 mm, 40 mm rounds, 35 mm squares, notch 100 x 42 x 10 mm. Single pedal operation.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £6,750   Reserve: £4,000

Unused Sahinler HKM60, 60-Ton, Hydraulic Universal Steel Worker, 120 x 120 x 12 mm angles at 90 degrees, punch 28 x 15 mm, 38 x 11 mm, flat shear 200 x 20 mm, 300 x 15 mm, 40 mm rounds, 35 mm squares, notch 100 x 42 x 10 mm, Single Pedal Operation.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £5,500   Reserve: £3,800

Unused Q-MACH 100-Ton Downstroke, Power Operated General Workshop Press, 3 KW, Single Phase, Max working height (adj) 900 mm, distance between columns1000 mm, depth between columns 350 mm, ram stroke 400 mm. Ram moveable across the width of the table.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £4,750   Reserve: £2,900

Unused Sahinler Model IBKS4.0, 4 mm Power Operated Swaging Machine with Hydraulic Clamping, Throat Depth: 200 mm, Roll Diameter 126 mm, Shaft Length 300 mm, Hydraulic Adjustment to Top Roll, Foot Pedal Operation, Bottom Stand, Forward/Back Adjustable Sheet Support, Single Speed 5 m/min, 4 sets of rolls, 2.2 kw Motor.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £8,750   Reserve: £3,300

Unused Sahinler Model IBKS2.5, 2.5mm Power Operated Swaging Machine, Throat depth 160 mm, roll diameter 96 mm, shaft length 250 mm. Manual adjustment to top roll, mounted on stand, forward/back adjustable sheet support, foot pedal operation, single speed 16 rpm, 4 sets of rolls, 1.5 kw motor

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £3,450   Reserve: £1,900

Unused Sahinler IK 1.2 mm Hand Operated Swaging Machine, Shaft length 140 mm, roll diameter 62 mm, throat depth 100 mm, adjustable sheet support, adjustable bottom shaft with 8 sets of rolls.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £750   Reserve: £200

Unused Sahinler IDK2, 2 mm, Power Operated Circle Cutting Machine with Pneumatic Sheet Clamping/Centring, Maximum Cutting Diameter 1000 mm, Minimum Cutting Diameter 180 mm. Outer Support Adjustable for Smaller Diameters, Separate Foot Pedal Control with Emergency Stop Button fitted with Brake Motor.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £4,250   Reserve: £1,800

Unused Sahinler IDK1, 1 mm Capacity Manual Operated Circle Cutting Machine, Maximum cutting diameter 1000 mm, minimum cutting diameter 150 mm. Outer support adjustable for smaller diameters

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £1,450   Reserve: £300

Unused Uzma MSN 17-90, Pipe Notching and Grinding Machine, 17 – 90mm diameter, Adjustable Angle Stop 45 – 0 – 45 degrees, Quick Release Clamp, Left – Right Movement of Clamp, Grinding Belt Width 100 mm with (2) Tools for different diameters

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £1,950   Reserve: £1,300

Unused HM MB1300S, 1350 mm x 1.2 mm, Hand Operated Box and Pan Folding Machine, Full Length Segmented Tooling

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £1,486   Reserve: £950

Unused HM MB700S, 650 mm x 1.5 mm, Hand Operated Box and Pan Folding Machine, Full Length Segmented Tooling.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £1,267   Reserve: £800

Unused Arboga A3808 No 4MT 35mm Drilling Capacity, Geared Head, Column Drilling Machine with Sensitive Feed, Spindle Speeds: 75 - 3010rpm (8), Drill Head Adjustable 360deg around the Column, Tee Slotted Table: 500 x400mm, Adjustable Height, Tee Slotted Base Plate, Quill Movement: 135mm, Motor: 0.65kw/0.9kw, Chuck Guard

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £3,745   Reserve: £2,400

Unused Arboga A2608 No 3MT 25mm Drilling Capacity, Geared Head, Column Drilling Machine with Sensitive Feed, Spindle Speeds: 105 - 2900rpm (8), Drill Head Adjustable 360deg around the Column, Tee Slotted Table: 500 x400mm, Adjustable Height, Tee Slotted Base Plate, Quill Movement: 135mm, Motor: 0.65kw/0.9kw, Chuck Guard

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £2,875   Reserve: £1,800

Unused Arboga Coolant Unit

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

New Price: £395   Reserve: £300