3152 - Colchester, DSG and Boxford Lathes, Kearney and Trecker, Pinnacle and Cincinnati Mills and other toolroom Ancillary items no longer required

Engineering

Auktion beendet am

Mittwoch 5 Okt 2022 at 03:00PM (BST)

Verbleibende Zeit

Auktion beendet

Artikelbeschreibung

Please Note: These lots are located in Sheffield, UK. Please see individual lots for loading information and charges, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Käuferprovision

Es gilt ein Aufgeld von 18 %.

Mehrwertsteuer

Zzgl. Mehrwertsteuer in Höhe von 20 %.

Seitenaufrufe

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

Der Käufer ist auf seine Kosten für das Abklemmen, Abbauen und Entfernen der gekauften Gegenstände vom Versteigerungsort verantwortlich. Beabsichtigt der Käufer, bei der Auktion erworbene Gegenstände zu exportieren, ist er auf eigene Kosten dafür verantwortlich, die Einhaltung aller britischen Exportbedingungen und den Erhalt aller anwendbaren Ausfuhrlizenzen sicherzustellen

Bitte markieren Sie das nachfolgende Kästchen und klicken Sie auf ”Bestätigen“.


* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.

Hinweis für die Käufer

Datum der letzten Zahlung

7 Okt 2022 at 17:00 (BST)

Endgültiges Freigabedatum

20 Okt 2022 at 17:00 (BST)

Versandunternehmen

Lagerfirma

Details zum Exportieren/Importieren aus Großbritannien

Lose 1-10 von 68

Die Gebote werden für einzelne Lose verlängert, wenn Gebote innerhalb von 10 Minuten nach der Endzeit des Artikels abgegeben werden.
Preview image
Endet:
05 Okt 2022 17:20:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£100
Gebote:
22
Aufgeld:
18%
MwSt-Satz:
20%

Los 1: Colchester Mastiff 1400 Gap Bed Centre Lathe

Colchester Mastiff 1400 Gap Bed Centre Lathe, Swing 21" x 80" Between Centres, Swing in Gap 32", Spindle Bore 3 1/2", Speeds 18 - 1400 rpm with 3 + 4 Jaw Chucks, DRO, Face Plate and Fixed Steady. S/No. LMF80GIRJH/07683. Country of Origin: UK

Please Note: This lot is located in Sheffield, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to ...

Preview image
Endet:
05 Okt 2022 17:10:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£250
Gebote:
20
Aufgeld:
18%
MwSt-Satz:
20%

Los 2: DSG Type 2112 x 100 Centre Lathe

DSG Type 2112 x 100 Centre Lathe, Swing 21" x 100" Between Centres, Spindle Bore 3 1/4", Speeds 11.2 - 1250 rpm with 3 Jaw Chuck, Rapids to Saddle, Fixed and Tra. Steadies. S/No. 41335-11-79

Please Note: This lot is located in Sheffield, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the ...

Preview image
Endet:
05 Okt 2022 15:50:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£250
Gebote:
13
Aufgeld:
18%
MwSt-Satz:
20%

Los 3: Cyclematic CTL - 618E Centre Lathe

Cyclematic CTL - 618E Centre Lathe, Swing 280mm x 460mm Between Centres, Spindle Bore 27mm with 3 + 4 Jaw Chucks, DRO, Collet Chuck and Collets. S/No. 10011186 (2011).  Country of Origan: Taiwan

Please Note: This lot is located in Sheffield, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and ...

Preview image
Endet:
05 Okt 2022 17:10:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£250
Gebote:
16
Aufgeld:
18%
MwSt-Satz:
20%

Los 4: Colchester Mascot 1600 Gap Bed Centre Lathe

Colchester Mascot 1600 Gap Bed Centre Lathe, Swing 17" x 100" Between Centres, Swing in Gap 28", Speeds 20 - 1600 rpm, Spindle Bore 3" with 3 + 4 Jaw Chucks, Face Plate and Fixed Steady. S/No. 7/0215/14640DD. Country of Origin: UK

Please Note: This lot is located in Sheffield, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your ...

Preview image
Endet:
05 Okt 2022 17:10:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£100
Gebote:
17
Aufgeld:
18%
MwSt-Satz:
20%

Los 5: Colchester Triumph 2000 Gap Bed Centre Lathe

Colchester Triumph 2000 Gap Bed Centre Lathe, Swing 15" x 50" Between Centres, Swing in Gap 23", Speeds 25 - 2000rpm with 3 Jaw Chuck. S/No. LTR50GIRJX/36812. Country of Origin: UK

Please Note: This lot is located in Sheffield, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...

Preview image
Endet:
05 Okt 2022 17:10:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£100
Gebote:
16
Aufgeld:
18%
MwSt-Satz:
20%

Los 6: Colchester Triumph 2000 Gap Bed Centre Lathe

Colchester Triumph 2000 Gap Bed Centre Lathe, Swing 15" x 50" Between Centres, Swing in Gap 23", Spindle Bore 2 1/8", Speeds 25 - 2000 rpm with 3 + 4 Jaw Chucks, Face Plate and Fixed Steady. S/No. 6/0044/35255. Country of Origin: UK

Please Note: This lot is located in Sheffield, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to ...

Preview image
Endet:
05 Okt 2022 17:10:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£100
Gebote:
16
Aufgeld:
18%
MwSt-Satz:
20%

Los 7: Colchester Triumph 2000 Gap Bed Centre Lathe

Colchester Triumph 2000 Gap Bed Centre Lathe, Swing 15" x 50" Between Centres, Swing in Gap 32", Spindle Bore 2 1/8", Speeds 25 - 2000 rpm with 3 + 4 Jaw Chucks, Fixed Steady. S/No. 6/0050/27516. Country of Origin: UK

Please Note: This lot is located in Sheffield, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to ...

Preview image
Endet:
05 Okt 2022 17:00:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£100
Gebote:
16
Aufgeld:
18%
MwSt-Satz:
20%

Los 8: Colchester Triumph 2000 Gap Bed Centre Lathe

Colchester Triumph 2000 Gap Bed Centre Lathe, Swing 15" x 50" Between Centres, Swing in Gap 23", Speeds 25 - 2000 rpm with 3 Jaw Chuck. S/No. 6/0002/00189. Country of Origin: UK

Please Note: This lot is located in Sheffield, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require ...

Preview image
Endet:
05 Okt 2022 16:40:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£100
Gebote:
15
Aufgeld:
18%
MwSt-Satz:
20%

Los 9: Colchester Triumph 2000 Gap Bed Centre Lathe

Colchester Triumph 2000 Gap Bed Centre Lathe, Swing 15" x 30" Between Centres, Swing in Gap 23", Spindle Bore 2 1/8", Speeds 25 - 2000 rpm with 3 Jaw Chuck. S/No. 6/0002/00217. Country of Origin: UK

Please Note: This lot is located in Sheffield, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods ...

Preview image
Endet:
05 Okt 2022 16:20:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£100
Gebote:
11
Aufgeld:
18%
MwSt-Satz:
20%

Los 10: Boxford CUD Centre Lathe

Boxford CUD Centre Lathe, Swing 11" x 20" Between Centres, Spindel Bore 3/4", Speeds 40 - 1400 rpm, with 3+4 Jaw Chucks, Face Plate, Catch Plate and Gears. Country of Origin: UK

Please Note: This lot is located in Sheffield, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which ...

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Kategorien