3143 - Toolroom Machinery & General Engineering Equipment no longer required by Pressed Parts Company (Rochdale, England)
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 116
Los 100: Harrison M500 Lathe
Harrison M500 Lathe Complete with: 1600rpm, 72" /180mm Bed, 2 Axis MDC 700L DRO (X&Z), Tailstock, 3 Jaw Chuck (12" / 300mm), 4 Jaw Chuck ( 12" / 300mm). Roller Steady, Coolant. 415 V - 3 Phase, 18.35 Amps, 9.7KW. Country of Origin: UK
Please Note: This lot is located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process ...
Los 101: Chester Coventry Lathe
Chester Coventry Centre Lathe, with Gap Bed, 8" (200mm)3 Jaw Chuck, 1200mm Bed ( 48"), Tailstock, Steady, SINO SdS6-2V DRO Control. Various Chucks and centres, Light, Guarded chuck
Please Note: This lot is located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January ...
Los 102: Excel Turret Mill ETM 2VS
ETM 2 VS Turret Mill, 5000-4200RPM, SINO SDS6-3V control, Simple DRO/PLC Control, Coolant, Work Light, 2014-07, Sn 140849, 48" x 9" (1200mm x 275mm) Bed, Work Vice. Excel Machine Tool Machine Number 24874
Please Note: This lot is located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export ...
Los 103: Baileigh Turret Mill
Baileigh Turret Mill, 240-1550 RPM, Yr 2015, BOMATE CONTROL/ DRO, Vice Coolant, Light, 40"x10" table 1000mm x 250mm- Country of Origin: Taiwan
Please Note: This lot is located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued ...
Los 104: Naerok Model Makers Lathe
Naerok Model Makers Lathe, 160-1240 RPM, 600mm bed, Screw Cutting, Metric & Imperial, Tailstock, Coolant 415V. Country of Origin: Taiwan
Please Note: This lot is located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an ...
Los 105: HME 40 Press
HME 40 Adjustable Stroke Press
Please Note: This lot is located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Los 106: HME 20 Press
HME 20 - OP20 Adjustable Stroke Press with Set Up Trolley and Bed
Please Note: This lot is located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Los 107: HME 12 Press
HME 12 Press, LM12, Adjustable Stroke 20"x 15" Bed Size
Please Note: This lot is located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Los 108: Excel No3 Surface Grinder
Excel No3 Surface Grinder, 415V, 12" Wheel, 1440 rpm, 30" x 8" Bed, Eclipse Mag Table 600mm x 200mm (24" x 8"). Country of Origin: UK
Please Note: This lot is located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Los 109: Jones & Shipman 540P Surface Grinder
Jones & Shipman Surface Grinder. 540 P 73100, 1864/136. with Coolant & Dust Extraction. Eclipse Magnetic Table 18" x 6". Country of Origin: UK
Please Note: This lot is located in Rochdale, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued ...