3030 - Akira Seiki and Fagima Machining Centres, Takisawa, Daewoo, Comev Picodue and Poreba Lathes and Ancillary Factory Items
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These items are located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 51-60 von 191
Los 63: Kitagawa BB208 210mm 3-Jaw Self-Centering Chuck
Kitagawa BB208 210mm 3-Jaw Self-Centering Chuck. Country of Origin: Japan
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 64: SMW Autoblok 210 BH 210mm 3-Jaw Self-Centering Chuck
SMW Autoblok 210 BH 210mm 3-Jaw Self-Centering Chuck. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 65: Serrmac TCS 40 Drill with Digit D.R.O
Serrmac TCS 40 Drill with Digital D.R.O, 3-Axis with Cross Table, Precision Modular Clamp, Type 4 Clamp Cone, Complete with Chip Collecting Tank and Set of Toolholders. S/No. 991787 (1999. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 65A: (2) x Precision Modular Vices
(2) x Precision Modular Vices. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *65 & 65A: Combination of lots 65 & 65A
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
65 | Serrmac TCS 40 Drill with Digit D.R.O |
65A | (2) x Precision Modular Vices |
Los 66: Dividing Head, 200mm diameter
Dividing Head, 200mm diameter. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 67: Wicker Single Phase AC220 Sharpening Machine
Wicker Single Phase AC220 Sharpening Machine. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 68: Wicker Single Phase AC220 Sharpening Machine
Wicker Single Phase AC220 Sharpening Machine. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 69: (1) x 160mm Vice & (1) x 200mm Vice
(1) x 160mm Vice & (1) x 200mm Vice. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 70: Serrmac TCS 3-Axis Drill with Cross Table
Serrmac TCS 3-Axis Drill with Cross Table, Machine Vice, 3-Jaw Chuck & Coolant Tray. S/No. 70587 (2007). Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.