2970 - Okamoto Grinder, Nakamura & Harrison Lathes, Matchmaker Milling Machine and other Toolroom Equipment surplus to requirements
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: This lot is located in West Sussex, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-6 de 6
Lot 3: Harrison Alpha 400 Plus CNC/Manual Teach Lathe (1998)
Harrison Alpha 400 Plus CNC/Manual Teach Lathe (1998) with Fanuc Control, 195mm Centre Height, 1,250 Between Centres, 2,500RPM, 3 Jaw Chuck, QCTP And Holders. S/No. P30064
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 4: Nakamura TW10MM CNC Lathe (1998)
Nakamura TW10MM CNC Lathe (1998) with Fanuc 18Ti Control, 6 Axis, LNS Ecoload Short Mag Bar Feed, Twin 12 Station Turret, Full C Axis & Drive Tools, Toolsetting Eyes, Collet Chuck, 3-Jaw Chuck, Q Setters, Renishaw Probe, Parts Catcher, Swarf Conveyor, 52mm Bar Cap, Machine Foot Print 3,100 x 1,850mm, Bar Feeder 2,000 x 1,100mm. S/No. W105809
Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of ...
Lot 13: DSG 13 x 30 Centre Lathe (1972)
DSG 13 x 30 Centre Lathe (1972), 3-Jaw, 4-Jaw, 4 Way Toolpost, Newall DRO. S/No. 39359-12-72
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 14: Ajax Geared Head Pillar Drill
Ajax Geared Head Pillar Drill, Type 21590B, Power feed, Geared Head, Rise and Fall Table, 77 to 1,280rpm, 9 Speeds, Feed Rate 0.004 to 0.009 Pre Revolution. S/No. 21711
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 17: Hitachi Seiki Hicell 23B CNC Lathe (1997)
Hitachi Seiki Hicell 23B CNC Lathe (1997), Driven Tooling, Sub-Spindle, Seicos LIII Control, Sub Spindle, LNS Quickload Short Mag Bar Feeder, 65mm Spindle Bore, max Turning Dia 260mm, max Turning Length 500mm, Bar Cap 65mm, 14 Station Turret, C/W Driven and Static Tool Holders, Tool Setting Eye, Parts Catcher, Collet Chuck, Swarf Conveyor. S/No. CA23806
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 19: Colchester Tornado A50 CNC Lathe (1999)
Colchester Tornado A50 CNC Lathe (1999) with Fanuc 21iTB Control, Tornado MBF 1000 Short Mag Bar Feeder, Collet Chuck, 3 Jaw chuck, 12 Station VDI Turret, Parts Catcher, No Tailstock, Turn dia x length 170 x 350mm, Bar Cap 42mm, 4000rpm, 5.5kw. S/No.T50157 Manuals
Please Note: This lot is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.